NIPXI-5105

60 MS/s, 60 MHz, 12-Bit, 8-Channel Digitizers NI 5105 • 8 channels simultaneously sampled at 12-bit resolution • 60 MS/s real-time sampling • 60 MHz bandwidth • 50 mVpp to 30 Vpp input range • 72 dBc SFDR • 16, 128, or 512 MB of onboard memory • Edge, window, hysteresis, and digital triggering Operating Systems • Windows Vista/XP/2000 • LabVIEW Real-Time Recommended Software • LabVIEW • LabWindows™/CVI • Measurement Studio for Visual Studio • LabVIEW SignalExpress Calibration • Gain, offset, frequency response, and timing self-calibration • 2-year external calibration interval Driver Software (included) • NI-SCOPE driver • LabVIEW Express VIs • Scope Soft Front Panel Overview National Instruments 5105 high-resolution digitizers feature eight 60 MS/s simultaneously sampled input channels with 12-bit resolution, 60 MHz bandwidth, and up to 512 MB of memory in a compact, 3U PXI/PXI Express or PCI device. An NI 5105 uses the National Instruments Synchronization and Memory Core (SMC) architecture, so you can combine multiple devices to build up to 136 phase-coherent channels in a single PXI chassis. You can also synchronize an NI 5105 with other analog and digital instruments to create mixed-signal test systems. An NI 5105 is ideal for a wide range of applications including ultrasonic nondestructive test (NDT), medical imaging, scientific research, military/aerospace, and consumer electronics. Applications Imaging Ultrasonic nondestructive test Optical coherence tomography Medical imaging Aerospace/Defense RADAR, SONAR, and LIDAR Satellite Signal intelligence Consumer Electronics DVD, DVD-R, and PVR Set-top box Gaming console Communications xDSL Triggering, Clocking, and Synchronization • Edge, window, hysteresis, and digital triggering • Pretrigger and posttrigger acquisition in single- and multiple-record mode • Internal 60 MHz clock or external clock from 4 to 65 MHz • Phase lock to PXI 10 MHz reference or external reference from 1 to 20 MHz • Timestamp-triggered events with 100 ps resolution Software • IVI-compliant NI-SCOPE driver for NI LabVIEW and LabWindows/CVI as well as Microsoft C++ and Visual Basic with more than 50 built-in measurements • Scope Soft Front Panel for interactive control Eight 60 MS/s, 12-Bit Input Channels for Time and Frequency Analysis • 60 MHz input bandwidth with antialias and noise filters • >72 dBc spurious-free dynamic range (SFDR) • Independent channel-selectable 50 mVpp to 30 Vpp input ranges • Independent channel-selectable 50 Ω or 1 MΩ input impedance • 2-year calibration interval and 0 to 55 °C operating temperature Deep Onboard Memory • 16, 128, or 512 MB of onboard memory • Capture more than 1 million triggered waveforms in multiple record mode, with hardware trigger rearming • Stream data continuously from onboard memory to host memory or disk Ordering Information NI PXI-5105 ........................................................................779685-0M1 NI PCI-5105 ........................................................................779686-0M1 1M (onboard memory): 1 (16 MB), 2 (128 MB), 3 (512 MB) Includes NI-SCOPE driver and Scope Soft Front Panel. Recommended PXI Switch NI PXI-2593 (500 MHz mux/matrix) ......................................778793-01 BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/digitizers. 60 MS/s, 60 MHz, 12-Bit, 8-Channel Digitizers Specifications These specifications are valid for 0 to 55 °C‚ unless otherwise stated. Acquisition System Number of channels............................ 8 simultaneously sampled Vertical resolution............................... 12 bits Bandwidth (-3 dB) Full-Scale Input Range All except 50 mV 50 mV 50 Ω 60 MHz 55 MHz 1 MΩ 60 MHz 35 MHz Dynamic performance (1 MΩ input impedance with 10 MHz, -1 dBFS input signal) Full-Scale Input Range 50 mV 200 mV 1V 6V SFDR = Spurious-free dynamic range THD = Total harmonic distortion SINAD = Signal-to-noise and distortion SFDR (dBc) – 70 65 65 THD (dBc) -72 -75 -65 -68 SINAD (dB) 50 59 61 59 Onboard memory/(512 B x number of enabled channels) Input impedance ................................. 50 Ω and 1 MΩ || 50 pF, software selectable Full-scale input range 50 Ω................................................ 50 mV, 200 mV, 1 V, 6 V 1 MΩ .............................................. 50 mV, 200 mV, 1 V, 6 V, 30 V Maximum input overload 50 Ω ............................................... 7 Vrms with | peaks | ≤10 V 1 MΩ .............................................. | peaks | ≤42 V Input coupling ..................................... AC, DC (AC coupling on 1 MΩ only) AC coupling cutoff frequency (-3 dB).. 12 Hz Bandwidth limit filters (software selectable) .......................... Maximum sample rate........................ Onboard sample memory.................... Multirecord mode Maximum number of records ......... 24 MHz antialias 60 MS/s real-time 16, 128, or 512 MB RMS Noise (24 MHz filter enabled) Full-Scale Input Range 50 mV 200 mV 1V 6V 30 V (1 MΩ only) 50 Ω 19 µVrms 56 µVrms 290 µVrms 1.68 mVrms – 1 MΩ 60 µVrms 72 µVrms 300 µVrms 2.16 mVrms 9 mVrms Timebase System Timebase options................................ Internal, PXI star, external (PFI 1) Internal Internal sample clock frequency ........ 60 MS/s sampling rate with decimation by n where 1 ≤ n ≤ 65,535 Timebase accuracy.............................. ±25 ppm (±0.0025%) Accuracy DC accuracy (0 V offset setting) 50 Ω All ranges: ±(1% of input + 0.25% of FS + 600 µV) 1 MΩ 50 mV range: ±(1% of input + 0.25% of FS + 600 µV) 200 mV, 1 V, and 6 V ranges: ±(0.65% of input + 0.25% of FS + 600 µV) 30 V range: ±(0.75% of input + 0.25% of FS + 600 µV) External External clock range............................ 8 to 65 MHz, variable with decimation by n where 1 ≤ n ≤ 65,535 External reference sources ................. PFI 1 (SMB connector), PXI backplane 10 MHz External reference range .................... 1 to 20 MHz in 1 MHz increments External clock/reference amplitude.... Sine wave: 0.65 to 2.8 Vpp (0 to 13 dBm) Square wave: 0.2 to 2.8 Vpp External clock/reference impedance .. 50 Ω, AC coupled Channel-to-channel crosstalk ............. ≤-80 dB at 1 MHz Spectral Characteristics (typical) Dynamic performance (50 Ω input impedance with 10 MHz, -1 dBFS input signal) Full-Scale Input Range 50 mV 200 mV 1V 6V SFDR (dBc) – 72 72 72 THD (dBc) -75 -75 -75 -75 SINAD (dB) 59 62 62 62 Trigger System Modes ................................................. Edge, hysteresis, window, digital, immediate, software Sources................................................ CH 0 to CH 7, PXI_Trig , PFI 1, PXI star, software Slope ................................................... Rising or falling Hysteresis............................................ Fully programmable Sensitivity............................................ 2% FS BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.) 2 60 MS/s, 60 MHz, 12-Bit, 8-Channel Digitizers Intermodule SMC Synchronization Using NI-TClk (typical) Skew.................................................... 500 ps