NIPXI-8102

High-Value Embedded Controllers for PXI NI PXI-8101, NI PXI-8102 NEW! ◾◾ 2.0 GHz single-core for PXI-8101, 1.9 GHz dual-core for PXI-8102 ◾◾ 1 GB (1 x 1 GB DIMM) 800 MHz DDR2 RAM standard, 4 GB (1 x 4 GB DIMMs) maximum ◾◾ 80 GB integrated hard-drive standard ◾◾ 10/100/1000BASE-TX Ethernet ◾◾ Up to 132 MB/s system and slot bandwidth ◾◾ 2 Hi-Speed USB ports ◾◾ DVI-I video connector ◾◾ IEEE 1284 ECP/EPP parallel port ◾◾ RS232 serial port ◾◾ Internal PXI trigger bus routing ◾◾ Watchdog timer Software ◾◾ OS and drivers already installed ◾◾ Hard-drive-based image recovery PXI System Configuration ◾◾ Complete PXI system configuration at ni.com/pxiadvisor Overview The NI PXI-8101 and PXI-8102 high-value embedded controllers featuring Intel Celeron 575 and dual-core Celeron T3100 processors, respectively, are designed for use in PXI and CompactPCI systems. With their 2.0 GHz single-core and 1.9 GHz dual-core processors and 800 MHz DDR2 standard memory, these embedded controllers offer an ideal balance of performance and value. The PXI-8101 or PXI-8102 in a PXI chassis, such as the NI PXI-1036, provides a compact, highvalue, PC-based platform for test, measurement, and control applications. PXI-8101 CPU CPU frequency CPU cores Front-side bus L2 cache Dual-channel 800 MHz DDR2 RAM, standard Dual-channel 800 MHz DDR2 RAM, maximum Hard drive (standard option), minimum 10/100/1000BASE-TX (Gigabit) Ethernet Serial port (RS232) Parallel Port Hi-Speed USB ports Watchdog/trigger SMB Installed OS 1 Hardware With state-of-the-art packaging, the PXI-8101 and PXI-8102 integrate Intel processors and all standard and extended PC I/O ports into a single unit. By integrating many I/O ports on the controller, all active slots in the chassis remain available for measurement and control modules. This rugged one-piece controller design minimizes integration issues and eliminates the need for complex cabling to daughter boards. The PXI-8101 block diagram is shown in Figure 2. SYSmark 2007 Overall Performance NI PXI-8106 (with 1 GB RAM) 117 PXI-8102 Intel Celeron T3100 1.9 GHz 2 800 MHz 1 MB 1 GB (1 x 1 GB) 4 GB (1 x 4 GB) NI PXI-8104 60 NI PXI-8102 105 Intel Celeron 575 2.0 GHz 1 667 MHz NI PXI-8101 80 80 GB SATA (5400 rpm) 4 4 4 2 4 Windows Vista Business, Windows Vista Business (downgraded to Windows XP Professional)1 0 20 40 60 80 100 120 140 Figure 1. Embedded Controller Benchmarks Contact National Instruments or visit ni.com/pxiadvisor for information on other available operating systems. Table 1. NI PXI-8101 and PXI-8102 Features High-Value Embedded Controllers for PXI Peripheral I/O These controllers include high-performance peripheral I/O such as 10/100/1000BASE-TX (Gigabit) Ethernet and two Hi-Speed USB ports for connection to a keyboard, a mouse, a CD-ROM/DVD-ROM drive for software installation, or other standard PC peripherals such as speakers, printers, or memory sticks. Use the IEEE 1284 ECP/EPP parallel port to connect to a wide variety of devices, including tape backup drives, printers, and scanners. An RS232 port is available for connecting to serial devices. Hard-Drive-Based Recovery Image PXI-8101 and PXI-8102 embedded controllers are shipped with a factory image of the software installation stored on a separate partition of the hard drive. In the case of software corruption, you can invoke a recovery tool during the controller’s boot-up process that can use this backup image to restore the controller to its shipping software configuration. You also can use this recovery tool to create custom images that you can store on external mass storage devices such as a USB memory stick, USB hard drives, and USB CD/DVD drives. With this ability, you can create custom backup images that you can use to either recover the specific embedded controller or replicate the installation on other similar controllers. For more information on this tool, refer to KnowledgeBase 2ZKC02OK. Socket 479 CPU Memory The PXI-8101 and PXI-8102 use 800 MHz DDR2 SDRAM, which makes the controllers ideal for data-intensive applications requiring significant analysis. They have a single SO-DIMM socket for the DDR2 SDRAM. 1 GB (1 x 1 GB DIMM) of RAM is standard with upgrade options to 4 GB. Video The PXI-8101 and PXI-8102 include a Mobile Intel GM45 Express Chipset (Graphics and Memory Controller Hub) that has an integrated graphics processing unit. It delivers intense, realistic 3D graphics with sharp images, fast rendering, smooth motion, and high detail, without the need for an additional video card or peripheral. This unique architecture provides balanced memory usage between graphics and the system for optimal performance. Additionally, the PXI-8101 and PXI-8102 feature a DVI-I video connector that is compatible with digital (DVI) and analog video (VGA) monitors. A DVI-I to VGA adapter is included with the controller for use with VGA monitors. SATA Flash ROM 2 Hi-Speed USB Connectors Chipset I/O Controller Hub PXI Connector PCI Bus PXI Trigger SO-DIMM DDR2 SDRAM PC2-6400 Single CH Chipset Graphics Memory Controller Hub DMI DVI-I Connector Dual Monitor Support The DVI-I video port on the PXI-8101 and PXI-8102 is capable of supporting simultaneous DVI and VGA outputs. With this built-in capability, you can connect a digital and an analog monitor to your PXI system at the same time with independent displays. This negates the need for a separate PXI or CompactPCI video module to connect two monitors to your PXI system. A DVI-I (male) to DVI-D (female) and VGA (female) splitter is required for connecting the two monitors. Gigabit Ethernet LPC Bus LPT 1 Super I/O COM 1 SMB to PXI Trigger Watchdog Timer SMB Figure 2. NI PXI-8101 Block Diagram B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 2 High-Value Embedded Controllers for PXI Software The PXI-8101 and PXI-8102 come with the following minimum set of software already installed: ◾◾ Microsoft Windows OS (contact National Instruments or visit ni.com/pxiadvisor for a list of available Microsoft OSs and for localized versions) ◾◾ NI-VISA and NI-488.2 drivers ◾◾ Drivers for all built-in I/O ports (Table 1) Ordering Information For online configuration of a complete PXI system, including NI system assurance programs, visit ni.com/pxiadvisor. Step 1. Select controller model. NI PXI-8101 .................................................................................... 780955-xx NI PXI-8102 .................................................................................... 781149-xx Step 2. Replace “xx” to select installed OS. Windows Vista Business (English)............................................................. -02 Windows Vista – downgraded to Windows XP Professional (English) ........................................................................ -01 Localized Windows XP or Other OS1.......................................................... -00 1 System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software reinstalled. When you order your system with the standard program, you also receive systemspecific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs. Contact National Instruments or visit ni.com/pxiadvisor for the latest operating systems. Step 3. Memory upgrades – select the amount of upgrade memory. Standard: 1 GB (1 x 1 GB DIMM) Recommended upgraded memory configurations: 2 GB (1 x 2 GB DIMM must be purchased) 4 GB (1 x 4 GB DIMM must be purchased) 2 GB DDR2 RAM ........................................................................ 780446-2048 4 GB DDR2 RAM ........................................................................ 780446-4096 Step 4. Select Accessories.2 80 GB (or greater) 2.5 in. SATA HDD spare/replacement .............. 779175-03 32 GB 2.5 in. SATA solid-state hard-drive upgrade ....................... 779175-08 250 GB (or greater) 2.5 in. SATA hard-drive upgrade .................... 779175-06 DVI-I (male) to DVI-D (female) and VGA (female) splitter ............. 780868-01 USB-to-dual-PS/2 keyboard/mouse adapter cable........................ 778713-02 External USB CD-ROM/DVD-ROM drive ........................................ 778492-01 External USB floppy drive .............................................................. 778492-02 USB English keyboard and optical mouse ..................................... 779660-01 Parallel port adapter cable (6 in.)................................................... 777169-01 NI MKD-1117 (rack-mount 1U LCD monitor, keyboard, mouse drawer)...................................................... 779872-01 NI FPM-1017 (17 in. flat panel monitor) ........................................ 779559-01 NI FPT-1015 (flat panel touch screen with VGA interface and USB) ........................................................ 779560-01 2 For additional peripheral I/O modules, including serial, IEEE 1394, and SCSI, visit ni.com/pxiadvisor. BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/pxi. B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 3 High-Value Embedded Controllers for PXI Specifications Specifications subject to change without notice. Environment Maximum altitude ................................. Pollution degree .................................... Intel Celeron 575 2.0 GHz Intel Celeron T3100 Dual Core 1.9 GHz Mobile Intel GM45 Express Chipset 667 MHz 800 MHz 1 GB 800 MHz DDR2 RAM PC2 6400 4 GB 800 MHz DDR2 RAM PC2 6400 10/100/1000BASE-TX, RJ45 connector 80 GB minimum, 5400 rpm, internal 2.5 in., 9.5 mm Serial ATA 1.0 interface Integrated Graphics (Mobile Intel GM45 Express Chipset) 1 (RS232) IEEE 1284 Type C miniature connector (adapter cable not included) Relative humidity range ........................ 2 Relative humidity range ........................ Indoor use only. 2,000 m (800 mbar) (at 25 °C ambient temperature) 2 Features Processor PXI-8101............................................ PXI-8102............................................ Chipset .................................................. Front-side bus PXI-8101............................................ PXI-8102............................................ System memory (RAM) Standard ........................................... Maximum .......................................... Ethernet ................................................. Hard drive .............................................. Video ..................................................... Serial ..................................................... Parallel .................................................. Hi-Speed USB........................................ Operating Environment Ambient temperature range1 ................ 5 to 50 °C2, 3 (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) 10 to 90% noncondensing (tested in accordance with IEC-60068-2-56) For chassis that are not available in the online catalog at ni.com, contact National Instruments for supported operating temperatures. 2 5 to 40 °C for the NI PXI-1000B DC. 3 Processor should not throttle CPU frequency under reasonable, worst case processor workloads in high operating temperature. 1 Storage Environment Ambient temperature range.................. -40 to 65 °C (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) 5 to 95% noncondensing (tested in accordance with IEC-60068-2-56) Power Requirements Current (A) Voltage (V) +3.3 +5 +12 -12 Typical PXI-8101 2.25 3.50 0.001 0.0 PXI-8102 2.50 4.00 0.001 0 .0 PXI-8101 3.6 6.6 0.075 0.0 Maximum PXI-8102 4.80 7.80 0.075 0.0 Shock and Vibration Operating shock .................................... 30 g peak, half-sine, 11 ms pulse (tested in accordance with IEC-60068-2-27; test profile developed in accordance with MIL-PRF-28800F) Random vibration Operating .......................................... Nonoperating .................................... 5 to 500 Hz, 0.3 grms (with solid-state hard drive) 5 to 500 Hz, 2.4 grms (tested in accordance with IEC-60068-2-64; nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3) Physical Board dimensions.................................. 2-slot 3U PXI module, 4.0 by 13 by 21.6 cm (1.59 by 5.1 by 8.5 in.) Slot requirements.................................. Compatibility ......................................... Weight................................................... One system slot plus one controller expansion slot Fully compatible with PXI Specification 0.645 kg (1.42 lb) typical B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 4 High-Value Embedded Controllers for PXI Safety Compliance ◾◾ IEC 61010-1, EN 61010-1 ◾◾ UL 61010-01, CSA 61010-1 Electromagnetic Compatibility ◾◾ EN 61326 (IEC 61326): Class A emissions; Basic immunity ◾◾ EN 55011 (CISPR 11): Group 1, Class A emissions ◾◾ AS/NZS CISPR 11: Group 1, Class A emissions ◾◾ FCC 47 CFR Part 15B: Class A emissions ◾◾ ICES-001: Class A emissions CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows: ◾◾ 2006/95/EC; Low-Voltage Directive (safety) ◾◾ 2004/108/EC; Electromagnetic Compatibility Directive (EMC) Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 5 NI Services and Support NI has the services and support to meet MA IN IN TA PL your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. AN SERVICE NEEDS LO Y V DE Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. EL OP Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled. When you order your system with the standard program, you also receive systemspecific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for highaccuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 8 00 813 3693 n National Instruments info@ni.com ©2009 National Instruments. All rights reserved. CompactRIO, FieldPoint, National Instruments, National Instruments Alliance Partner, NI, NI-488, and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 0081