NIPXIE-6535

Low-Cost, Selectable-Voltage, Digital I/O Devices up to 50 MHz NI PCIe-6535/36/37, NI PXIe-6535/36/37 NEW! • 10/25/50 MHz maximum clock rate • Data streaming up to 40 MB/s (NI 6535) 100 MB/s (NI 6536) or 200 MB/s (NI 6537)1 • Selectable voltage levels of 2.5 and 3.3 V (5.0 V compatible) • 32 channels with per-channel directional control • x1 PCI Express/PXI Express interface • Synchronous and asynchronous (handshaking) timing modes • Software-compatible with NI 6533 and NI 6534 NI-DAQmx applications 1Data Operating Systems • Windows Vista/XP/2000 • LabVIEW Real-Time Recommended Software • • • • LabVIEW LabWindows™/CVI LabVIEW SignalExpress Digital Waveform Editor Other Compatible Software • Visual Basic • C/C# • .NET rates vary depending on device PC chipset, RAM or hard disk data streaming, and data direction. Driver Software (included) • NI-DAQmx • LabVIEW Express VIs Product NI 6535 NI 6536 NI 6537 Platform PCI Express/PXI Express PCI Express/PXI Express PCI Express/PXI Express Channels 32 32 32 Maximum Clock Rate (MHz) 10 25 50 Compatible Voltage Levels (V) 2.5, 3.3, and 5.0 TTL 2.5, 3.3, and 5.0 TTL 2.5, 3.3, and 5.0 TTL Maximum Throughput (MB/s) 40 100 200 Table 1. NI 6535, NI 6536, and NI 6537 Specifications Overview Overview NI 6535, NI 6536, and NI 6537 digital I/O devices are high-speed 32-bit interfaces built on PCI Express bus technology. These cost-effective devices provide an ideal way to interface with a variety of digital applications requiring a high number of channels for digital I/O including high-speed functional digital tests, handshaking, chip testing, pattern generation, memory testing, and logic vector capture. This family features maximum clock rates of 10, 25, or 50 MHz; selectable voltage levels compatible with 2.5, 3.3, and 5 V TTL logic; and individually configured pins for input or output. With both synchronous and asynchronous timing modes, handshaking, and a software API designed around the NI-DAQmx driver, NI 6535/36/37 devices have the flexibility to meet the requirements of semiconductor, consumer electronics, and communications applications. Applications Digital Interfacing Custom Digital Device Semiconductor Digital Data Transfers Consumer Electronics Digital Display Testing CCD Imaging Sensors Communications Digital I/O Streaming Wireless Chip Testing Digital Interfacing • Use NI 6535/36/37 devices to interface digital systems and devices directly with PC-based applications • Control, communicate with, or send data to a digital device or system • Analyze and record digital data • Perform bidirectional communications with handshaking Timing Modes • Pattern I/O or sample clock (synchronous) – transfer patterns using an internal or external clock signal • Burst handshaking (synchronous) – handshake an NI 6535, NI 6536, or NI 6537 device and the peripheral device during synchronous transfer to maximize the transfer rate • Handshaking I/O (asynchronous) – transfer patterns when both the NI 6535, NI 6536, or NI 6537 device and the peripheral device are ready • On-demand (unstrobed or static I/O) – acquire or generate data through software-timed commands • Change detection – acquire data whenever a change occurs on one or more digital lines Low-Cost, Selectable-Voltage, Digital I/O Devices up to 50 MHz High Signal Quality NI 6535/36/37 devices feature an improved architecture, offering not only higher clock rates up to 50 MHz at low cost but also superior signal integrity and impedance matching. Figure 1. Eye Diagram of NI PXIe-6537 at 50 MHz Improved Architecture Compatible with NI 6533 and NI 6534 Applications These devices are ideal replacements for future-proofing applications currently using NI 6533/34 devices. • NI 6535/36/37 devices are software-compatible with existing NI 6533/34 NI-DAQmx applications • You can interface to existing NI 6533/34 fixtures and terminal blocks with the NI 653x cable adapter • NI 6535/36/37 devices are compatible with most NI 6533/34 timing modes – pattern I/O, handshaking, change detection, and burst Figure 3. Eye Diagram Comparison of the NI 6535 (top) with the NI 6534 (bottom) Using Recommended Signal Termination Connectivity Options To meet connectivity requirements for high-speed digital applications, you can use NI 6535/36/37 devices with a variety of accessories. • A CB-2162 connector block • A 50 Ω shielded flying lead cable • A VHDCI high-density connector High-Speed Data Streaming • Generate and acquire larger digital waveforms with PCI Express high-speed devices, using the ideal, low-cost NI 6535/36/37 devices • Stream continuously at up to 200 MB/s of data • Stream data from the host computer’s memory or high-end storage solution such as NI RAID arrays and controllers • Use for applications requiring high speeds and fast streaming capabilities such as LCD testing, wireless protocols, ADC/DAC interfacing, or digital pattern capture • Visit ni.com/streaming for more information Multidevice Synchronization Figure 2. You can use NI 6535/36/37 devices with an NI 653x cable adapter to connect to existing NI 6533/34 applications. • In comparison to legacy digital I/O boards, NI 6535/36/37 devices have improved signal quality. In Figure 3, the top eye diagram is from an NI PXIe-6535 generating at 10 MHz. The bottom diagram shows an NI PXI-6534 generating a 10 MHz signal using signal termination recommended by NI. These products use the PXI trigger bus or RTSI bus to send and receive clock and trigger signals to and from other NI 6535/36/37 devices in your system. With these capabilities, you can create synchronized systems with large numbers of digital I/O lines. BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.) 2 Low-Cost, Selectable-Voltage, Digital I/O Devices up to 50 MHz Imported sample clock timebase/ frequency range NI 6535 .......................................... NI 6536 .......................................... NI 6537 .......................................... Exported sample clock destinations...... Specifications These specifications are valid for 0 to 55 °C, unless otherwise noted. Channel Characteristics Number of channels............................ 32 data, 6 PFI Direction control of channels ............. Per-channel Generation Signal Characteristics (data, PFI channels) All voltage ranges specified into 1 MΩ Generation voltage families (V) .......... 2.5, 3.3 logic families (5.0 V compatible) Generation signal type........................ Single-ended Timebase division ............................... NI 6535 ........................................... NI 6536 ........................................... NI 6537 ........................................... Maximum data channel toggle rate NI 6535 ........................................... NI 6536 ........................................... NI 6537 ........................................... Data position modes........................... Generation Voltage Levels Family Settings (V) 2.5 3.3 5.0 Low Voltage Levels (V) Typical Max 0 0.1 0 0.1 0 0.1 High Voltage Levels (V) Min Typical 2.4 2.5 3.2 3.3 3.2 3.3 0 Hz to 10 MHz 0 Hz to 25 MHz 0 Hz to 50 MHz PFI (generation) PFI (acquisition) RTSI (PCI Express only) PXI_Trig (PXI Express only) DSTARC (PXI Express only) Imported timebase/N; 20 ≤ N ≤ 4,194,307 8 ≤ N ≤ 4,194,307 4 ≤ N ≤ 4,194,307 Generation Signal Characteristics (data, PFI channels) 5 MHz 12.5 MHz 25 MHz Active edge, inactive edge (data channels only) Output impedance............................... 50 Ω nominal Maximum DC drive strength............... ±16 mA at 2.5 V, ±32 mA at 3.3 V Channel power-up state ..................... Software programmable (0, 1, or HighZ; 2.5 or 3.3 V) Handshaking Asynchronous handshaking modes ...... Handshaking sample timing Synchronous handshaking modes ........ Burst sample timing Pipelined sample clock timing Control line polarity ............................ Active high Active low Acquisition Signal Characteristics (data, PFI channels) Acquisition voltage families (V).......... 2.5, 3.3 logic families (5.0 V compatible) Acquisition Voltage Levels Family Settings (V) 2.5 3.3 5.0 Low Voltage Thresholds (V) Max 0.75 1.0 1.0 High Voltage Thresholds (V) Min 1.75 2.3 2.3 Change Detection Change detection resolution............... Sources for change detection............. Valid sample position.......................... Valid changes...................................... Sample clock period Data channels 0 to 31 Active edge, inactive edge Rising, falling, both Input impedance ................................. 50 kΩ Input protection................................... -1 to 6 V Waveform Characteristics Transfer types...................................... DMA Programmed I/O (static only) Timing Characteristics Sample Clock Sources................................................ Onboard clock (internal OSC with divider) PFI RTSI (PCI Express only) PXI_Trig (PXI Express only) PXI-Star (PXI Express only) DSTARA (PXI Express only) Onboard clock frequency range NI 6535 ........................................... 48 Hz to 10 MHz, settable to 200 MHz/N; 20 ≤ N ≤ 4,194,307 NI 6536 ........................................... 48 Hz to 25 MHz, settable to 200 MHz/N; 8 ≤ N ≤ 4,194,307 NI 6537 ........................................... 48 Hz to 50 MHz, settable to 200 MHz/N; 4 ≤ N ≤ 4,194,307 Trigger Inputs Trigger types........................................ Start trigger (pipelined or sample clock timing) Pause trigger (pipelined or burst timing) Reference trigger (pipelined or sample clock timing) Handshake trigger (handshaking timing) Sources................................................ PFI (DDC connector) RTSI (PCI Express only) PXI_TRIG (PXI Express only) DSTARB (PXI Express only) Pattern match (acquisition only) Disabled (do not wait for a trigger) BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.) 3 Low-Cost, Selectable-Voltage, Digital I/O Devices up to 50 MHz Trigger detection ................................. Start trigger (edge detection: rising or falling; pattern match: match or don’t match) Pause trigger (level detection: high or low; pattern match: match or don’t match) Reference trigger (edge detection: rising or falling; pattern match: match or don’t match) Handshaking trigger (interlocked: high or low) Destinations ........................................ PFI (DDC connector) RTSI (PCI Express only) PXI_TRIG (PXI Express only) DSTARC (PXI Express only) Compliance Safety The NI 6535/36/37 devices meet the requirements of the following standards for safety and electrical equipment for measurement, control, and laboratory use: • IEC 61010-1, EN 61010-1 • UL 3111-1, UL 61010-1 • CSA 61010-1 Note: For full EMC compliance, you must operate this device with shielded cabling. In addition, all covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. For access to certifications, marks, and DoCs, visit ni.com/certification. Events (outputs from NI 6536/37) Event types.......................................... Data active, ready for start, ready for transfer, handshaking, change detection Destinations ........................................ PFI (DDC connector) RTSI (PCI Express only) PXI_TRIG (PXI Express only) DSTARC (PXI Express only) Ordering Information NI PCIe-6535..........................................................................780694-01 NI PXIe-6535..........................................................................780695-01 NI PCIe-6536..........................................................................779672-01 NI PXIe-6536..........................................................................779988-01 NI PCIe-6537..........................................................................779673-01 NI PXIe-6537..........................................................................779989-01 Includes NI-DAQmx software. Miscellaneous Physical Dimensions PCI Express ..................................... 18.1 by 12.6 cm (7.13 by 4.93 in.) PXI Express ..................................... 21.4 by 13.1 cm (8.42 by 5.14 in.) Power Requirements Typical ................................................. 5.1 W Maximum ............................................ 6.1 W Software NI Digital Waveform Editor ..................................................778724-03 Cables SHC68-C68-D4 Shielded Single-Ended Cable ......................196275-01 C68-C68-D4 (unshielded 1 m cable)......................................195949-01 SHC68-H1X38 (flying lead 1.5 m cable)..............................192681-1R5 Terminal Blocks CB-2162 (terminal block with pin headers) ..........................778592-01 SMB-2163 (SMB breakout box) ............................................778747-01 Header Jumper Kit ................................................................199101-01 Connectors Dual Stacked VHDCI Connector, 68-Pin, Right-Angle ..........780390-01 VHDCI Connector, 68-Pin, Vertical ........................................780389-01 VHDCI Connector, 68-Pin, Right-Angle..................................778914-01 NI 653x Cable Adapter (68-pin SCSI to 68-pin VHDCI) ........195846-01 Software Driver and application software ......... NI-DAQmx Environment Operating temperature PCI Express ..................................... PXI Express ..................................... Storage temperature........................... Operating relative humidity ................ 0 to +45 °C 0 to +55 °C -20 to +70 °C 10 to 90%, noncondensing (meets IEC-60068-2-56) Storage relative humidity ................... 5 to 95%, noncondensing (meets IEC-60068-2-56) BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S. only) or go to ni.com/hsdio. BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.) 4 NI Services and Support IN TA PL SERVICE NEEDS LO Y V DE NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. MA IN Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. EL OP AN Professional Services Our Professional Services Team is composed of NI applications engineers, NI Consulting Services, and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com • 800 813 3693 National Instruments • info@ni.com *351437B-01* 351437B-01 2008-9628-101-I ©2008 National Instruments. All rights reserved. CVI, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, RTSI, SCXI, and SignalExpress are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.