NIPXIE-8234

Image Acquisition from GigE Vision Cameras NI PCIe-8231, NI PCIe-8235, NI PXIe-8234 NEW! • Gigabit Ethernet controllers • Up to 100 MB/s transfer rates per port • Optimized for low CPU load Operating Systems • Windows Vista/XP/2000 Recommended Software • LabVIEW • Vision Development Module • Vision Builder for Automated Inspection (AI) Driver Software (included) • NI Vision Acquisition Overview Get the most performance from your GigE Vision camera with National Instruments GigE Vision interfaces, including the NI PCIe-8231 one-port interface, the NI PCIe-8235 four-port interface, and the NI PXIe-8234 two-port interface. NI Vision Acquisition software is highly optimized for these controllers and the resulting CPU usage for acquiring images from them is extremely low. With their PCI Express-based interfaces, these devices provide full GigE Vision bandwidth at every port, giving you the bandwidth you need for your most demanding vision applications. I/O Synchronization GigE Vision High Throughput Cost-Effectiveness Low CPU Usage Cable Length Camera Availability Standardized Interface Power over Cable Specifications These specifications are typical at 25 °C unless otherwise stated. GigE Vision Image Acquisition GigE Vision is a new interface standard for cameras that transmit images over gigabit Ethernet. It provides an alternative for vision applications requiring long cable distances or lower-cost cabling. While the cabling is simpler, a separate cable is required to supply power to the camera. NI Vision Acquisition software works with any gigabit Ethernet controller but is highly optimized for Intel gigabit Ethernet controllers. General Number of ports.................................. 1 IEEE Standard 802.3z network topology.. 1000Base-T Cabling Connector ............................................ RJ45 Wiring.................................................. CAT 5 UTP, 4 pair Length.................................................. up to 100 m Ethernet Ordering Information NI PCIe-8231 (1-port PCI Express board) ..............................779813-01 NI PCIe-8235 (4-port PCI Express board) ..............................780400-01 NI PXIe-8234 (2-port PXI Express module)............................780263-01 Includes Vision Acquisition software. Controller processor............................ Intel 82572EI Data rates ........................................... 1 Gb/s Power Requirement 3.3 VDC ............................................... 1.0 A, 3.3 W Physical Dimensions NI PCIe-8231................................... 12.9 by 12.0 cm (5.1 by 4.73 in.) NI PCIe-8235................................... 12.9 by 12.0 cm (5.1 by 4.725 in.) NI PXIe-8234................................... 10.0 by 16.0 cm (3.9 by 6.3 in.) BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/vision. Environment Operating temperature ....................... 0 to 55 °C NI Services and Support IN TA PL AN SERVICE NEEDS LO Y V DE EL OP NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. MA IN Professional Services Our Professional Services Team is composed of NI applications engineers, NI Consulting Services, and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com • 800 813 3693 National Instruments • info@ni.com *351470B-01* 351470B-01 2008-10290-221-101-D ©2008 National Instruments. All rights reserved. LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments.