NIUSB-9215A

Portable USB-Based DAQ with Simultaneous Sampling NI USB-9215A (Windows) • Small, portable devices (12.1 by 8.6 by 2.5 cm) • 4 channels of 16-bit simultaneously sampled analog input • Built-in, removable connectors for easier and more cost-effective connectivity • 250 Vrms channel-to-earth ground isolation • Plug-and-play connectivity via USB • Bus-powered Operating Systems • Windows Vista/XP/2000 Recommended Software • LabVIEW • LabWindows™/CVI • Measurement Studio Measurement Services Software (included) • NI-DAQmx driver software • LabVIEW SignalExpress LE Product USB-9215A 1For Signal Type Voltage Channels (DI) 4 Input Resolution (bits) Sampling Rate (kS/s/ch) 16 100 Input Range (V) ±10 Connector Operating System Screw Terminal, BNC Windows Driver Software1 NI-DAQmx up-to-date information on NI-DAQ, visit ni.com/support/daq/versions.htm. Table 1. Portable USB DAQ for Simultaneous Sampling Selection Guide Overview The National Instruments USB-9215A is a data acquisition module with integrated signal conditioning that provides plug-and-play connectivity via USB for faster setup and measurements. It offers four channels of simultaneously sampled voltage inputs with 16-bit accuracy to deliver minimal phase delay when scanning multiple channels. In addition, this module includes 250 Vrms channel-to-earth ground isolation for safety, noise immunity, and high common-mode voltage range. Common Applications The USB-9215A is ideal for a number of applications where small size and portability are essential, such as: • Portable data logging – log temperature data quickly and easily • Academic lab use – obtain academic discounts for quantities of five or more (visit ni.com/academic for details) • Environmental monitoring – monitor environmental conditions such as humidity or light • Embedded OEM applications • In-vehicle data acquisition Software The NI USB-9215A uses NI-DAQmx high-performance, multithreaded driver software for interactive configuration and data acquisition on Windows OSs. All NI data acquisition devices shipped with NI-DAQmx also include NI LabVIEW SignalExpress LE configuration-based data-logging software. Information for OEM Customers For information on special configurations and pricing, visit ni.com/oem. Recommended Accessories The USB-9215A has built-in screw-terminal connectivity, so no additional accessories are required. It is also available with BNC connectors. Ordering Information NI USB-9215A (Windows) Screw terminals ................................................................779434-01 BNC connectors ................................................................779435-01 BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/oem. NI Services and Support IN TA PL SERVICE NEEDS LO Y V DE NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. MA IN Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. EL OP AN Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com • 800 813 3693 National Instruments • info@ni.com *351569A-01* 351569A-01 2008-8980-301-101-D-2A ©2008 National Instruments Corporation. All rights reserved. CVI, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner, NI, ni.com, SCXI, and SignalExpress are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.