NIWSN-3212

Wireless Sensor Network Ethernet Gateway NI WSN-9791 NEW! ◾◾ NI-WSN software provides easy network configuration and data extraction ◾◾ 2.4 GHz, IEEE 802.15.4 radio to communicate with measurement nodes ◾◾ 10/100 Mbits/s Ethernet port for flexible connectivity to Windows PCs or LabVIEW Real-Time programmable automation controllers (PACs) ◾◾ Up to 300 m outdoor range with line of sight ◾◾ Supports up to 36 measurement nodes ◾◾ 9 to 30 VDC power input ◾◾ Industrial ratings: ◾◾ -30 to 70 ºC operating temperature ◾◾ 50 g shock, 5 g vibration ◾◾ Panel and DIN-rail mounting options available Operating Systems ◾◾ Windows Vista/XP/2000 ◾◾ LabVIEW Real-Time Software Support ◾◾ LabVIEW Driver and Configuration Software (included) ◾◾ NI-WSN software ◾◾ Measurement & Automation Explorer configuration utility Overview The NI WSN-9791 Ethernet gateway coordinates communication between distributed NI WSN-32xx measurement nodes and a host controller in your NI wireless sensor network (WSN). The gateway uses a 2.4 GHz, IEEE 802.15.4 radio to gather measurement data from the sensor network and a 10/100 Mbits/s Ethernet port to provide flexible connectivity to a Windows PC or NI LabVIEW Real-Time PAC, as seen in Figure 1. With this flexibility, you can create simple, stand-alone wireless monitoring networks or completely integrated wired and wireless measurement solutions that feature access to the full breadth of NI hardware and software platforms. LabVIEW integration with NI WSNs delivers a common development environment for your applications as well as rapid application development, easy network configuration, remote data access, and the ability to program and customize measurement node behavior. The 9 to 30 VDC externally powered gateway offers -30 to 70 °C operating temperatures, 50 g shock ratings, and a compact, 2U form factor. Up to 36 measurement nodes can communicate with a single gateway, and you can configure the Ethernet settings of the gateway for DHCP, static, and link-local IP address configurations. Wireless Networking The NI WSN system is built on a low-power, reliable IEEE 802.15.4 network. The Ethernet gateway coordinates the wireless network, performing functions such as device authentication, message buffering, and network topology administration. The gateway, routers, and end nodes work together to form a mesh network. Measurement nodes can operate as routers or end nodes, providing the flexibility to extend the range of your sensor network. When nodes are configured as routers, they can repeat messages from end nodes and extend network range Figure 1. NI WSN systems provide flexible connectivity to Windows or LabVIEW Real-Time host controllers. while acquiring measurement data. NI Wireless Sensor Network Ethernet Gateway To save power and increase reliability, the network delivers a maximum theoretical throughput of 250 kbits/s. In general, this correlates to between 30 and 60 samples per minute per channel on the WSN measurement nodes. You can configure the network to operate on any of the 14 wireless communication channels to optimize performance and ensure coexistence with other wireless devices. The external, omnidirectional antenna and internal power amplifier offer up to 300 m outdoor range with line of sight. Programming You can integrate your NI WSN measurement data directly into LabVIEW. After adding the WSN Ethernet gateway to a LabVIEW project, the nodes configured with the gateway in MAX are automatically added underneath the gateway in the project, giving you instant access to their I/O and properties. Software Overview With NI-WSN software, you can easily configure your sensor network in the NI Measurement & Automation Explorer (MAX) configuration utility and quickly extract measurement data from your wireless sensor network with the LabVIEW graphical development environment. Network Configuration MAX offers an intuitive user interface to add and remove measurement nodes and configure wireless settings. Upon connection, the WSN-9791 Ethernet gateway is autodetected under Remote Systems in MAX, and you can assign measurement nodes to the gateway. The gateway maintains a list of nodes (by serial number) that have been authorized for network access. When a node powers up, it scans for available networks, locates either a gateway or router, and attempts to join it. If the gateway has the node in its list, the node joins the network, downloads the latest configuration from the gateway, and begins its normal operation of acquiring measurement data and controlling digital I/O. If a node is unable to connect, it executes a retry sequence with increasingly higher wait periods beginning with one minute between connect attempts and ending with 55 minutes between connect attempts. This preserves battery power if a gateway is offline. MAX also offers an overview of the nodes connected to your network including their last communication time, battery status, and link quality. In addition, MAX provides an interface to set the wireless communication channel, configure the gateway IP address, and wirelessly update firmware on the measurement nodes. Figure 3. NI WSN System in a LabVIEW Project Simply drag and drop I/O variables from the LabVIEW project to a LabVIEW block diagram for data extraction, analysis, and presentation. Figure 2. Network Configuration in MAX B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 2 Wireless Sensor Network Ethernet Gateway Mechanical Information The WSN-9791 Ethernet gateway measures approximately 4.6 by 2.3 by 3.5 in. (L by W by H). The front of the gateway offers power, status, and activity LEDs in addition to a reset button that you can use to reboot the device. The power connector and Ethernet port are located on the front, while the DIN-rail and panel mount plate screw holes are located on the back of the device. The gateway also includes integrated panel mount holes that are located on the side of the device. Consult the WSN-9791 user guide for detailed mechanical information. Figure 4. Extracting NI WSN Measurement Data Using LabVIEW Reset Button Activity, Power, Status LEDs Ethernet Port Power Connector Figure 6. Gateway External Features DIN-Rail and Panel Mount Plate Screw Holes Advanced WSN Architectures You can combine NI WSNs with other NI platforms to customize and enhance your measurement capabilities. You can complement your NI WSN with PACs, vision systems, or even human machine interfaces (HMIs) to create a fully integrated solution that meets your unique application needs. Integrated Panel Mount Holes Accessories NI WSN accessories feature options for gateway and measurement node mounting as well as a weatherproof enclosure for outdoor use of the measurement nodes. Available mounting accessories include options to panel mount and DIN-rail mount WSN measurement nodes and gateways. The NI WSN-3281 magnetic panel mount kit provides easy setup and takedown on virtually any metal surface. For high shock and vibration applications, NI recommends a panel mounting configuration rather than DIN-rail. Accessory NI WSN-3280 NI WSN-3281 NI WSN-3282 NI WSN-3283 Description NI WSN node panel mount bracket with spring-loaded screw-locking mechanism and integrated strain relief NI WSN node magnetic panel mount bracket with spring-loaded screw-locking mechanism and integrated strain relief NI WSN DIN-rail mounting kit for nodes or gateway (includes four screws) NI WSN panel mount plate for nodes or gateway (recommended for gateway) with additional four keyholes for mounting to wall in multiple orientations (includes four screws) Figure 5. Customize and enhance your NI WSN system. Table 1. Mounting Kits LabVIEW integration with NI WSNs also provides database integration, remote data access with Web services, and customizable analysis and visualization of your data. In addition, you can use other NI software such as DIAdem to provide advanced data processing and analysis or the LabVIEW Datalogging and Supervisory Control Module for integrated event detection and alarming. You can choose from several power accessories that provide external power to the WSN Ethernet gateway or WSN measurement nodes. B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 3 NI Wireless Sensor Network Ethernet Gateway Accessory Desktop Power Supply Description This power supply provides 12 VDC power up to 1.25 A/15 W, and is rated for 0 to 70 °C. The supply terminates with a 2-position MINI-COMBICON connector; plugs directly into the WSN gateway or measurement nodes. This DIN-rail-mountable, 24 VDC power supply delivers up to 5 A of current and is rated for operation from -25 to 60 °C. Recommended for industrial installations. Ordering Information NI WSN Starter Kit (Americas) ...................................................... 781080-01 NI WSN Starter Kit (Europe/Asia) ................................................. 781080-11 Ethernet Gateway NI WSN-9791 (Americas)............................................................... 780996-01 NI WSN-9791 (Europe/Asia) .......................................................... 780996-11 Programmable Measurement Nodes NI WSN-3202 (Americas)............................................................... 780997-02 NI WSN-3202 (Europe/Asia) .......................................................... 780997-12 NI WSN-3212 (Americas)............................................................... 780998-02 NI WSN-3212 (Europe/Asia) .......................................................... 780998-12 PS-5 Power Supply Table 2. External Power Supplies The connectivity accessories for NI WSN products include additional screwterminal kits for the measurement nodes and a power connector backshell kit that contains a strain relief attachment for the two-position power connector on the Ethernet gateway and measurement nodes. Accessory Power Connectors Power Connector Backshell Description Extra 2-position MINI-COMBICON power connectors – quantity 4 Strain relief attachment for the 2-position power connector on the measurement nodes and gateway that clips to the connector and includes a zip tie to hold the power cable in place Nonprogrammable Measurement Nodes NI WSN-3202 (Americas)............................................................... 780997-01 NI WSN-3202 (Europe/Asia) .......................................................... 780997-11 NI WSN-3212 (Americas)............................................................... 780998-01 NI WSN-3212 (Europe/Asia) .......................................................... 780998-11 Power Accessories Desktop supply ............................................................................... 780703-01 U.S. power cord.............................................................................. 763000-01 PS-5 industrial supply .................................................................... 778805-90 Mounting Accessories NI WSN-3280 ................................................................................. 780999-01 NI WSN-3281 ................................................................................. 781073-01 NI WSN-3282 ................................................................................. 781074-01 NI WSN-3283 ................................................................................. 781075-01 Connectivity Accessories NI WSN-3284 ................................................................................. 781076-01 NI WSN-3285 ................................................................................. 781077-01 Power connectors........................................................................... 780702-01 Power connector backshell kit ....................................................... 196375-01 Outdoor Enclosure and Accessories NI WSN-3291 ................................................................................. 780994-01 NI WSN-3292 ................................................................................. 195712-01 NI WSN-3293 ................................................................................. 195738-01 Table 3. Connectivity Accessories BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/wsn. B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 4 NI Wireless Sensor Network Ethernet Gateway Specifications These specifications are typical at 25 °C unless otherwise noted. Power Requirements Caution: Use the WSN-9791 with a 24 VDC, UL-listed, limited power source (LPS) supply. The power supply bears the UL-listed mark, LPS. It must also meet any safety and compliance requirements for the country of use. Input voltage range ............................... IEEE 802.15.4 250 kbits/s Up to 90 m Up to 300 m ISM 2.4 GHz (2400 to 2483.5 MHz) 11 to 24 Maximum required input power ........... 9 to 30 V 4.5 W » For complete specifications, see the NI WSN-9791 User Guide and Specifications manual at ni.com/manuals. Wireless Characteristics Radio mode ........................................... RF data rate ........................................... Indoor range .......................................... Outdoor range ....................................... Frequency band .................................... 1 Physical Characteristics Weight................................................... Weight with antenna ............................ Dimensions............................................ Approx. 250 g (8.8 oz) Approx. 259 g (9.1 oz) See the NI WSN-9791 User Guide and Specifications manual for device dimensions. Channels .............................................. 2 1 Due to regulations, the frequency bands depend on the country of operation. 2 Due to regulations, the valid channels depend on country of operation. TX power Version Americas Europe/Asia Maximum Radio Output +17 dBm max (50 mW) +10 dBm max Environmental The WSN-9791 device is intended for indoor use only. For outdoor use, mount the system in a suitably rated enclosure. Operating temperature.......................... DSSS (O-QPSK) -102 dBm Female RP-SMA connector MAX 2.0 50 Ω Omni 1.5 dBi Storage temperature ............................. Operating humidity................................ Storage humidity ................................... Maximum altitude ................................. Pollution degree .................................... -30 to 70 °C (IEC-60068-2-1 and IEC-60068-2-2) -40 to 70 °C (IEC-60068-2-1 and IEC-60068-2-2) 10 to 90% RH, noncondensing (IEC-60068-2-56) 5 to 90% RH, noncondensing (IEC-60068-2-56) 2,000 m 2 (IEC 60664) Modulation type ............................... Receiver sensitivity........................... Antenna Connector.......................................... VSWR................................................ Impedance ........................................ Directivity.......................................... Nominal gain ......................................... Ethernet Network interface ................................. 100BASE-TX, full-duplex; 100BASE-TX, half-duplex; 10BASE-T, full-duplex; 10BASE-T, half-duplex Network protocols................................. Network IP configuration ...................... Communication rates ........................... Maximum cabling distance ................... TCP/IP, UDP DHCP + Link–Local, DHCP, Static, Link–Local 10/100 Mbits/s, autonegotiated 100 m/segment Shock and Vibration Operating vibration, random ................. Operating shock .................................... 5 grms, 10 to 500 Hz (IEC 60068-2-64) 30 g, 11 ms half sine, 50 g, 3 ms half sine, 18 shocks at 6 orientations (IEC 60068-2-27) Operating vibration, sinusoidal ............. 5 g, 10 to 500 Hz (IEC 60068-2-6) B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 5 NI Services and Support NI has the services and support to meet MA IN IN TA PL your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. AN SERVICE NEEDS LO Y V DE Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. EL OP Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled. When you order your system with the standard program, you also receive systemspecific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for highaccuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 8 00 813 3693 n National Instruments info@ni.com ©2009 National Instruments. All rights reserved. CompactRIO, DIAdem, FieldPoint, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 2009-10858-161-101-D