PXI-1050

PXI Chassis with Integrated Signal Conditioning NI PXI-1050, NI PXI-1052 • Integrated SCXI signal conditioning • Ideal for high-channel-count data acquisition applications • Built-in cabling to SCXI slots • HALT tested for increased reliabilty NEW PXI-1050 • 8 PXI slots and 4 SCXI slots • Multiplexed and parallel operating modes for SCXI • Latest chassis technology PXI-1052 • 4 PXI slots and 8 SCXI slots • Latest chassis technology • AUTO/HIGH fan-speed selector to optimize cooling and acoustic emissions • Quieter operation, as low as 42 dBA • Extended temperature range to 55 °C • Multiplexed operating mode for SCXI • SCXI high-voltage analog backplane integrated internally Slots Model PXI-1050 PXI-1052 PXI 8 4 SCXI 4 8 SCXI Operation Mode Multiplexed and Parallel Multiplexed High-Voltage Analog Backplane –  Table 1. PXI-1050 and PXI-1052 Features PXI-1052 Acoustic Emissions Sound Pressure Level1 (measured at operator position) Auto Fan (25 °C ambient) High Fan Sound Power1 Auto Fan (25 °C ambient) High Fan 1Tested dBA 41.6 51.5 51.9 60.0 in accordance with ISO 7779 Overview National Instruments offers PXI chassis with integrated SCXI so you can have the benefits of SCXI and the PXI platform integrated in a single PXI chassis. The PXI platform offers a variety of modules such as multifunction I/O, digital I/O, switching, and instrument modules. With SCXI you can expand the functionality of your data acquisition system with modules for multiplexing, linearization, filtering, isolation, amplification, switching, and more. The NI PXI and SCXI combination chassis offer a complete solution for a wide range of test and measurement applications that require signal conditioning, switching and multiplexing. Visit the PXI/SCXI advisor at ni.com/pxiadvisor to view a complete list of SCXI modules and configure a PXI and SCXI system. Table 2. PXI-1052 Acoustic Emissions SCXI Operating Modes NI PXI chassis with integrated SCXI provide a built-in digital and analog bus between the rightmost PXI slot and the SCXI subsystem so that a DAQ or DMM module can control the SCXI subsystem in multiplexed mode without external cabling. Using the PXI-1050, you can also connect additional PXI DAQ modules to SCXI modules in parallel mode (requires additional cabling). In multiplexed mode, one DAQ module controls the entire SCXI subsystem; all measurements are multiplexed back to this one device so users can create a cost-effective high-channel-count system. SCXI handles many types of sensor measurements, including voltages, resistances, thermocouples, strain gages, accelerometers, RTDs, and LVDTs. PXI-1050, PXI-1052 The PXI-1050 and PXI-1052 offer the latest chassis technology from NI. The PXI-1050 is an upgrade to the PXI-1010, and works with all NI PXI controllers. The PXI-1052 implements fan-speed control of the power supply and module fans to reduce acoustic emissions, and offers an AUTO/HIGH fan-speed selector switch. When set to AUTO, the PXI-1052 optimizes cooling and acoustic emissions based on air intake temperature. Software for Configuring Your System National Instruments is a leading supplier of integrated hardware and software for test and measurement applications. With software such as Measurement & Automation Explorer (MAX), you can easily configure your PXI/SCXI system. Using LabVIEW and NI-DAQ, you can quickly configure your measurement and begin acquiring signals. MAX automatically detects which PXI and SCXI modules are installed in your system so you can configure your measurements. In Figure 1, MAX is used to configure measurements. PXI Chassis with Integrated Signal Conditioning Automatic Code Generation With LabVIEW and NI-DAQ 7.0 or later, you can use NI-DAQ Express VIs to configure your measurement type, as shown in Figure 1, and then automatically generate the code necessary to acquire that measurement. With the flexibility of PXI, the benefits of SCXI, and easy-to-use software such as MAX and LabVIEW, you can take full advantage of flexible hardware and software from National Instruments, to develop robust applications to meet your measurement needs. Installation The PXI-1050 and PXI-1052 have differentiated designs that make them ideally suited for different environments. For benchtop use, the PXI-1052 has supporting feet that easily tilt up. You can also set the feet to level the chassis with the benchtop, or completely remove them. The PXI-1050 comes with removable rubber feet for benchtop applications. Both chassis offer mounting points located on each side of the chassis, to which you can attach optional rack-mount kits. You can also use them to recess the PXI-1050 or PXI-1052 chassis in your instrument cabinet. The PXI-1052 is well suited for portable applications, with a built-in carrying handle. It also has the SCXI high-voltage analog back plane (HVAB) built in. All of these configurations can be assembled or disassembled without accessing the interior of the chassis. Figure 1. Use MAX to select your measurement type. Ordering Information Step 1. Select your chassis. NI PXI-1050 120 VAC ....................................................................779199-01 100 VAC ....................................................................779199-02 220 VAC .....................................................................779199-03 240 VAC ....................................................................779199-04 NI-PXI-1052 (universal input) ....................................778693-01 Step 2. Select one or more power cords. PXI-1052 rront rack-mount kit (for 19 in. rack) ........................................................778931-01 PXI-1052 rear rack-mount kit (for 19 in. rack) .........................................................778931-02 EMC filler panels (6 single-slot ....................................778700-01 Filler panels (3 double-slot and 3 single-slot)1 ............................................................778679-01 Slot blockers (2 single-slot)2 ........................................778678-01 PXI-1052 chassis comes with two single-slot filler panels. blockers are optional for improved thermal performance of your PXI-1052 system. Please refer to National Instruments KnowledgeBase entry on slot blocker usage criteria on ni.com/support for additional information on this optional system feature. 2Slot 1Every U.S. 120 VAC ................................................................763000-01 Japan 100 VAC ..............................................................763000-01 United Kingdom 240 VAC ............................................763064-01 Swiss 220 VAC ..............................................................763065-01 Australian 240 VAC ......................................................763066-01 Universal Euro 240 VAC................................................763067-01 North American 240 VAC.............................................763068-01 Step 3. Select additional accessories. Step 4. Select system setup and installation services. SCXI-1370 Rack Mount kit for the SCXI-1001 or PXI-1050 chassis ..............................776577-70 SCXI-1360 rront filler panel ........................................776576-60 SCXI-1361 rear filler panel ..........................................776576-61 SCXI-1374 handle kit....................................................776577-74 If you are ordering this chassis as part of a system, select NI Factory Installation Services to have your hardware/software installed and receive your new PXI system ready to use right out of the box. NI Factory Installation Services – PXI Systems ..........960596-01 BUY NOW! For complete product specifications, pricing, and accessory information, call (800) 813 3693 (U.S. only) or go to ni.com/pxi. 2 National Instruments • Tel: (800) 433 3488 • info@ni.com • ni.com PXI Chassis with Integrated Signal Conditioning Specifications PXI-1050 Complies with PXI Specification, Rev 2.1 Physical Dimensions....................................................... 41.3 by 43.8 by 16.2 cm [16.2 by 17.3 by 7.0 in.] Height for rack-mount installation................... 4U Weight.............................................................. 13 kg [29 lb] Mean Time Between Failures (MTBF) ............. 110,000 hours (Predictions performed in accordance with Belcore methods) Electrical AC Power Supply AC Input Input voltage range .......................................... 100/120/220/240 VAC Input frequency ................................................ 50/60 Hz Operating frequency range .............................. 47 to 63 Hz Operating Environment Ambient temperature ....................................... 0 to 50 °C (Meets IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity ............................................. 10 to 90%, noncondensing (Meets IEC 60068-2-56.) DC Output – Available Power Per Rail Voltage (V) +3.3 +5 +12 -12 IMP (steady-state current) (A) 30 20 4 2 Storage Environment Ambient temperature ....................................... -20 to 70 °C (Meets IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity ............................................. 5 to 95%, noncondensing (Meets IEC 60068-2-56.) Maximum Ripple and Noise Voltage (V) +3.3 +12 +5 -12 Maximum Ripple and Noise (mVpp) 50 120 50 120 Shock and Vibration Operational shock ............................................ 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC-60068-2-27. Test profile developed in accordance with MIL-PRF-28800F) Random vibration Operating.......................................................... 5 to 500 Hz, 0.3 grms Nonoperating.................................................... 5 to 500 Hz, 2.4 grms (Tested in accordance with IEC-60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3) Cooling Per slot cooling capacity .................................. 25 W per slot Module cooling system.................................... Forced air circulation (positive pressurization) through two fans Module cooling intake ..................................... Bottom rear of chassis Module cooling exhaust................................... Top sides of chassis Power supply cooling system........................... Forced air circulation from integrated fan Power supply cooling intake ............................ Rear of chassis Power supply cooling exhaust ......................... Sides of chassis Safety and EMC/EMI Compliance Safety ............................................................... EN 61010-1, IEC 61010-1, UL 61010-1, CAN/CSA C22.2 No. 61010.1 EMC/EMI .......................................................... CE, C-Tick, and FCC Part 15 Electrical Emissions ......................................... EN 55011 Class A at 10 m, and FCC Part 15 Class A above 1 GHz Electrical Immunity........................................... EN 61326:1998, Table 1 A2:2001, Table 1 Specifications PXI-1052 Complies with PXI Specification, Rev 2.1 Complies with CompactPCI, PICMG 2.0 R3.0 Over-current protection .................................... All outputs protected from short circuit and overload Over-voltage protection.................................... 115 to 140% above nominal output voltage Electrical AC Input Input voltage range .......................................... Operating voltage range .................................. Input frequency ................................................ Maximum Usable Power.................................. 100 to 240 VAC 90 to 264 VAC 50/60 Hz 450 W PXI Subsystem Cooling Fans .................................................................. 1 @ 115 cfm, with filters Per slot cooling capacity .................................. 25 W with fan speed set to HIGH Slot airflow direction ....................................... P1 to P2, bottom of module to top of module Module cooling System.............................................................. Forced air circulation (positive pressurization) fan with HIGH/AUTO speed selector Exhaust ............................................................. Along both sides and top of chassis Power supply cooling System.............................................................. Forced air circulation through integrated fan Intake................................................................ Right side of chassis Exhaust ............................................................. Left side of chassis DC Output – Available Power Per Rail IMP (steady-state current) (A) Voltage (V) +3.3 +5 +12 -12 +20 -20 0 to 50 °C 12 17 2 1 1.36 1.36 50 to 55 °C 12 17 2 1 1.16 1.16 Sound Pressure Level (at Operator position) (Tested in accordance with ISO 7779) Auto Fan (at 25°C ambient)....................... 41.6 dBA High Fan..................................................... 51.5 dBA Maximum ripple and noise (20 MHz bandwidth) Voltage (V) +3.3 +5 +12 -12 +20 -20 Maximum Ripple and Noise (mVpp) 50 50 120 120 200 200 Sound Power (Tested in accordance with ISO 7779) Auto Fan (at 25°C ambient)....................... 51.9 dBA High Fan..................................................... 60.0 dBA Environment (Indoor use only) Altitude ............................................................ 2,000 m Installation Category ........................................ II Pollution Degree............................................... 2 National Instruments • Tel: (800) 433 3488 • info@ni.com • ni.com 3 PXI Chassis with Integrated Signal Conditioning Operating Environment Ambient temperature ....................................... 0 to 55 °C (Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2.) Relative humidity ............................................. 10 to 90% (Tested in accordance with IEC-60068-2-56.) Random Vibration Operating ................................................... 5 to 500 Hz, 0.31 grms Nonoperating............................................. 5 to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64) Storage Environment Ambient temperature ....................................... –20 to 70 °C (Tested in accordance with IEC-60068-2-1 and IEC-60068-2-2.) Relative humidity ............................................. 5 to 95% noncondensing (Tested in accordance with IEC-60068-2-56.) Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use: • IEC 61010-1, EN 61010-1 • UL 3111-1, UL 61010B-1 • CAN/CSA C22.2 No. 1010.1 NOTE: For UL and other safety certifications, refer to the product label or to ni.com. 10 MHz System Reference Clock (PXI_CLK10) Maximum clock skew between slots .............. 250 ps Built-in 10 MHz clock Accuracy .................................................... ±25 ppm (guaranteed over the operating temperature range) Maximum jitter .......................................... 5 psrms in 10 Hz to 1 MHz range External clock sources Connectors................................................. BNC on rear of chassis (ground referenced) or Slot 2 J2 Input frequency.......................................... 10 MHz ±100 ppm or better Input amplitude Rear connector.................................... 200 mVpp to 5 Vpp, 10 MHz squarewave or sinewave Slot 2................................................... 5 or 3.3 V, 10 MHz TTL signal Input impedance ........................................ 50±5 Ω (rear connector) Maximum jitter introduced by backplane circuitry................................ 1 psrms in 10 Hz to 1 MHz range Electromagnetic Compatibility Emissions.......................................................... EN 55011 Class A at 10 m. FCC Part 15A above 1 GHz Immunity........................................................... EN 61326-1:1997 + A1:1998, Table 1 CE, C-Tick and FCC Part 15 (Class A) Compliant NOTE: For EMC compliance, operate this device with shielded cabling. CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE Marking, as follows: Low-Voltage Directive (safety)......................... 73/23/EEC Electromagnetic Compatibility Directive (EMC) ................................................ 89/336/EEC NOTE: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, click Declarations of Conformity Information at ni.com/hardref.nsf/. Shock and Vibration Functional shock............................................... 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-T-28800E.) 4 National Instruments • Tel: (800) 433 3488 • info@ni.com • ni.com NI Services and Support NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industryleading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. SERVICE NEEDS Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Professional Services Our Professional Services Team is comprised of NI applications engineers, NI Consulting Services, and a worldwide NI Alliance Partner Program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com • (800) 813 3693 National Instruments • info@ni.com © 2005 National Instruments Corporation. All rights reserved. LabVIEW, National Instruments Alliance Partner, NI, NI-DAQ, ni.com, and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI. 2005_4981_501_101_D