PXI-2568

Medium-Power General-Purpose SPST Relays NI PXI-2568 • 31 independent SPST relays • Maximum switch capacity Up to 150 VDC, 150 VAC Up to 2 A switching/2 A carry • Latching relays • 32,000-step scanlist for deterministic scanning • Fully software programmable • 145 cycles/s • Tight synchronization with instruments through hardware triggers NEW Operating Systems • Windows 2000/NT/XP Recommended Software • LabVIEW™ • LabWindows™/CVI™ • Measurement Studio™ for Visual C++ • NI Switch Executive Other Compatible Software • Visual Basic • C/C++ Driver Software (included) • NI-SWITCH Compliance • UL • CE Overview and Applications The National Instruments PXI-2568 is a general-purpose 31-channel switch module, featuring independent SPST (Form A) armature relays. Each relay is latching with very low on-resistance and low thermal offsets. The NI PXI-2568 can switch up to 2 A at 30 VAC/30 VDC. With an efficient coupling of voltage/current capability and relay density, the PXI-2568 is ideal for automated test equipment (ATE) loads or for controlling heaters, lights, and fans. Software All National Instruments PXI switch modules are shipped with NI-SWITCH, an IVI-compliant driver offering complete functionality for all switch modules. For additional assistance in configuring, programming, and managing higher-channel-count switching systems, NI Switch Executive software offers an easy-to-use, intelligent switch management and visual routing environment. Automatic Scanning The PXI-2568 is able to maximize throughput in automated test applications by the use of scanning. Scanning improves throughput by downloading a list of up to 32,000 connections to the switch and cycling through the list using an event (trigger) without any interruption from the host processor. Scanning is most efficiently accomplished by mating the PXI-2568 with an instrument, such as the NI PXI-4070 61⁄2-digit FlexDMM, which issues a trigger after each measurement. Ordering Information NI PXI-2568 ..................................................................778572-68 Includes switch module and NI-SWITCH driver software Accessories NI Switch Executive Development System ................................................778546-01 Deployment Engine ..................................................778548-00 BUY ONLINE! Visit ni.com/info and enter pxi2568. Medium-Power General-Purpose SPST Relays Specifications Input Characteristics Maximum switching voltage Channel-to-ground..................................... Channel-to-channel ................................... Maximum switching/carry current................... Simultaneous channels at maximum switching current (25 ˚C) .......... Maximum switching power (per channel) .............................................. Typical DC path resistance Initial.......................................................... End of life .................................................. Thermal EMF .................................................... Bandwidth (-3 dB)............................................. 150 V, CAT I 150 V 2A 31 60 W, 62.5 VA Physical Relay types ...................................................... Contact material............................................... I/O connectors .................................................. Dimensions....................................................... electromechanical, latching palladium-ruthenium, gold covered 62-pin D-Sub 10 by 17.4 cm (3.9 by 6.9 in.) Single-slot, 3U Environment Operating temperature..................................... Storage temperature ........................................ Relative humidity ............................................ Pollution degree ............................................... Indoor use only 0 to 55 ˚C -20 to 70 ˚C 5 to 85% noncondensing 2