NACNW10M25V5X5.5TR13F

Surface Mount Aluminum Electrolytic Capacitors NACNW Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • NON-POLARIZED, 1000 HOURS AT 105OC • 5.5mm HEIGHT • ANTI-SOLVENT (2 MINUTES) • DESIGNED FOR REFLOW SOLDERING includes all homogeneous materials RoHS Compliant CHARACTERISTICS *See Part Number System for Details 6.3 ~ 50Vcc 0.1 ~ 47µF -55 ~ +105°C ±20% (M) 0.03CV + 8µA max. W.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Z -25°C/Z +20°C Z -40°C/Z +20°C Capacitance Change Tan δ Leakage Current 6.3 10 16 25 35 50 0.24 0.22 0.20 0.20 0.20 0.18 6.3 10 16 25 35 50 3 3 2 2 2 2 8 8 4 4 3 3 Within ±25% of initial measured value Less than 200% of specified max. value Less than specified max. value Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 1 Minutes @ 20°C Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test 105°C 1,000 Hours (Reverse polarity every 500 Hours) STANDARD VALUES, CASE SIZES & SPECIFICATIONS Cap. (µF) 22 33 47 10 22 33 4.7 10 22 33 3.3 4.7 10 2.2 3.3 4.7 10 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 50Vdc 35Vdc 25Vdc 16Vdc 10Vdc Working Voltage 6.3Vdc Case Size 5X5.5 6.3X5.5 6.3X5.5 4X5.5 6.3X5.5 6.3X5.5 4X5.5 5X5.5 6.3X5.5 6.3X5.5 4X5.5 5X5.5 6.3X5.5 4X5.5 5X5.5 5X5.5 6.3X5.5 4X5.5 4X5.5 4X5.5 4X5.5 4X5.5 5X5.5 5X5.5 6.3X5.5 Max. ESR (Ω) Max. Ripple Current (mA rms) AT 120Hz/105°C AT 120Hz/20°C 18.09 22 12.06 8.47 36.49 16.59 11.06 70.58 33.17 15.08 10.05 100.53 70.58 33.17 150.79 100.53 70.58 33.17 2985.67 1357.12 904.75 635.25 298.57 135.71 90.47 63.52 27 33 12 25 30 8 17 27 40 7 13 20 5.9 12 14 21 0.7 1.6 2.4 3.5 7 10 13 16 P B 0.3mm max. PART NUMBER SYSTEM NACNW 100 M 16V 5x5.5 Series RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF TR 13 F Dφ W I I L A DIMENSIONS (mm) Case Size Dφ ± 0.5 L max. A ± 0.2 I ± 0.2 W P ± 0.2 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 1.0 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 1.4 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 2.2 ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS 30 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com