NACP100M4V4X5.5TR13F

Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONTRUCTION • LOW PROFILE, 4.6mm MAXIMUM HEIGHT • DESIGNED FOR REFLOW ..SOLDERING CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes at 20°C Surge Voltage & Max. Tanδ Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test at Rated W.V. 85°C 1,000 Hours NACP Series includes all homogeneous materials *See Part Number System for Details RoHS Compliant 4 ~ 50Vdc 0.1 ~ 220µF -40° ~ +85°C ±20%(M) 0.01CV or 3µA, whichever is greater W.V. (Vdc) 4 6.3 10 16 25 35 50 S.V. (Vdc) 5 8.0 13 20 32 44 63 0.40 0.30 0.24 0.20 0.16 0.14 0.12 Tanδ @ 120Hz/20°C W.V. (Vdc) 4 6.3 10 16 25 35 50 Z-25°C/Z +20°C 7 4 3 2 2 2 2 Z-40°C/Z +20°C 15 10 8 6 4 4 4 Capacitance Change Within ±25% of initial measured value Less than 200% of specified value Tanδ Leakage Current Less than specified value MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 85OC) Cap. (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 Working Voltage (Vdc) 4 28 33 56 98 6.3 28 37 45 70 10 33 41 53 74 16 23 37 51 61 25 17 27 47 57 35 18 29 49 50 1.0 2.0 2.8 4.0 8.4 14 17 21 33 - MAXIMUM ESR (Ω AT 120Hz AND 20OC) Cap. (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 Working Voltage (Vdc) 4 20.1 14.1 6.6 3.0 6.3 22.6 15.1 10.6 5.0 10 18.1 12.6 8.5 3.98 16 33.2 15.1 10.1 7.1 25 56.5 26.5 12.1 8.1 35 49.4 23.2 10.8 50 1990 905 603 423 199 90.5 60.3 42.3 19.0 - RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Cap. (µF) 0.47 ~ 4.7 10 ~ 33 47 ~ 220 10< f 100KHz 2.0 1.45 1.3 ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 5 Surface Mount Aluminum Electrolytic Capacitors STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap. (µF) 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 Working Voltage (Vdc) 4 4x4.5 4x4.5 5x4.5 6.3x4.5 6.3 4x4.5 5x4.5 5x4.5 10 5x4.5 5x4.5 16 4x4.5 5x4.5 25 4x4.5 5x4.5 35 4x4.5 5x4.5 50 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 5x4.5 6.3x4.5 P B A 0.3mm max. NACP Series DIMENSIONS (mm) Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 W 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 P±0.2 1.0 1.4 2.2 + W I I - Dφ L 6.3x4.5 6.3x4.5 - 6.3x4.5 6.3x4.5 - 6.3x4.5 6.3x4.5 - 6.3x4.5 6.3x4.5 PART NUMBER SYSTEM NACP 470 M 16V 6.3x5.5 TR 13 F RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF Series ® 6 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com