NIN

Molded Chip Wirewound Inductors FEATURES • • • • • EIA SIZES A (1210), B (1812) AND C (1008) EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS includes all homogeneous materials BOTH FLOW AND REFLOW SOLDERING APPLICABLE *See Part Number System for Details HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE NIN Series RoHS Compliant AVAILABLE TYPE AND RANGE ��� ���� ���� ���� ���� � ���� �� � � � � ��� ��� � ��� � ��� ��� ���� ������ ������ ������ ������ ���� ���� � � ��� � ��� � ��� ��� � ��� � ��� ������ ������ ������ ���������� ����� ���� � ��� µ� ���� � ���� µ� ��� � �� µ� ���� � ��� µ� ���� � ��� µ� ��� � ��� µ� ���� � ���� µ� ����� �������� ���� ��������� ���� ������� �������� ���� ��������� ���� ������� �������� SPECIFICATIONS Specifications Inductance Range Inductance Tolerance Operating Temperature Range Insulation Resistance Withstanding Voltage Q-Factor, Self Resonant Frequency DC Resistance, Rated DC Current and Inductance Tolerance Case Size 1008 1210 1812 10nH ~ 100 µH 47nH ~ 330µH 0.10µH ~ 1000 µH ±20% (M), ±10% (K), ±5% (J) ±10% (K), ±5% (J) -25°C ~ +85°C (at 100% of rated voltage) 1,000 MegOhm Min. (@ 100Vdc, Termination to Case) 250 Vdc for 1 minute (Termination to Case) See Individual Product Listings ENVIRONMENTAL CHARACTERISTICS Test Solderability Humidity Specification 90% Min. Coverage Test Method & Condition After 3 Sec. Dip in +230oC Solder Pot (Post Flux) After 500 Hrs at 60oC and 90 ~ 95% RH After 5 Seconds at -260oC (5 Min. 120oC Pre-Heat) After 2 Hrs per Axis, 10 ~ 55Hz, 1.5 mm Ampl After 100 cycles (-40o to +85oC) 30 Min. Each After 500 Hrs at -40oC After 500 Hrs at +85oC with rated DC Current (1) No Evidence of Damage (2) Inductance Shall Be Soldering Effect Within +5% of initial Value Low Frequency Vibration (3) Q Factor Shall Be Thermal Shock Within +10 of initial Low Temperature Storage Value (1) No Evidence of Damage High Temperature Load (2) Inductance Shall Be Within ±10% of Initial Life Value (3) Q Factor Shall Be Humidity Load Life Within ±10% of Initial Value After 500 Hrs at 60oC with 90 ~ 95% RH with Rated DC Current ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 27 Molded Chip Wirewound Inductors DIMENSIONS (mm) SIZE A and C SIZE B NIN Series MARKING MARKING L W A W L B H B ��� ���� ���� ���� ���� ���� ���� � � � ���� � ���� ��� ���� ��� � ��� ��� � ��� ���� � ��� � ��� ��� � ��� ��� � ��� ���� � ��� � ��� ��� � ��� ��� � ��� ���� � ��� � ��� ��� � ��� ��� � ��� ���� � ��� � ��� ��� � ��� ��� � ��� PART MARKING Inductance Tolerance ±20% ±10% ±5% Marking for Tolerance M No Identification J Example 2R2M 470 270J (1) 3 digits system in µH (2) R indicates decimal point in µH Ex:2R7 = 2.7µH Ex:R18 = .18µH = 180nH (3) N indicates nanohenries (0.001 µH), Ex: 10N = 0.01 µH = 10nH Applicable Guidelines: 1. Recommended soldering conditions : Flow (wave): 250oC for 5 sec. max. (preheating of 120oC for 5 minutes.) Reflow: 250oC for 10 sec. max., total time above 230°C is 40 sec. max. (preheating 150°C ~ 180°C/120 sec. max.) 2. Avoid placing inductor over any metal pattern on the PCB, which may create mutual inductance problems. 3. For mounting, it is suggested to secure chip inductor by means of epoxy adhesive curable by ultraviolet. 4. Ultrasonic cleaning is not recommended. If it is necessary, the cleaning conditions must be examined so as not to create mechanical damage by unexpected resonant vibration. Please contact our engineering department. 5. An excessive mechanical force may effect the electrical and magnetic properties of chip inductors. Make sure not to use any stress greater than 2Kg when component is placed. PART NUMBER SYSTEM NIN-FA R47 M TR F Lead Free/RoHS compliant (99.3% Sn, 0.7% Cu) Packaging: TR = Tape & Reel Inductance Tolerance Code: M = ±20%, K = ±10%, J = ±5% Rated inductance in µH (3 digits, first 2 numbers are significant, R stands for decimal point) Series-Type ® 28 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com H www.SMTmagnetics.com A Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-FC SERIES NIC P/N NIN-FCR22xTR NIN-FCR27xTR NIN-FCR33xTR NIN-FCR39xTR NIN-FCR47xTR NIN-FCR56xTR NIN-FCR68xTR NIN-FCR82xTR NIN-FC1R0 xTR NIN-FC1R2 xTR NIN-FC1R5 xTR NIN-FC1R8 xTR NIN-FC2R2xTR NIN-FC2R7 xTR NIN-FC3R3 xTR NIN-FC3R9 xTR NIN-FC4R7 xTR NIN-FC5R6 xTR NIN-FC6R8 xTR NIN-FC8R2 xTR NIN-FC100 xTR NIN-FC120 xTR NIN-FC150 xTR NIN-FC180 xTR NIN-FC220 xTR NIN-FC270 xTR NIN-FC330 xTR NIN-FC390 xTR NIN-FC470 xTR NIN-FC560 xTR NIN-FC680 xTR NIN-FC820 xTR NIN-FC101 xTR ® C SIZE (1008) 'L' Inductance (µH) 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance (std) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) (opt) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) STANDARD TYPE 'Q' Factor (min.) 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 15 L&Q Test Freq. 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 0.796 Mhz SRF Mhz (min.) 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 32 30 28 25 22 21 20 18 17 16 15 13 12 DC Resistance (ohms) Max. 0.70 0.75 0.85 0.95 1.00 1.10 1.25 1.4 0.65 0.75 0.85 0.95 1.05 1.20 1.30 1.40 1.55 1.75 1.95 2.20 3.50 3.80 4.40 5.00 5.80 6.30 7.10 9.50 11.0 12.1 16.6 19.0 21.0 Rated DC Current (mA) Max. 190 180 170 160 155 150 140 130 195 180 170 160 155 145 135 130 125 120 115 105 80 75 70 65 60 115 110 90 80 75 70 65 60 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 29 Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-NC SERIES NIC P/N NIN-NC10NKTR NIN-NC12NKTR NIN-NC15NKTR NIN-NC18NKTR NIN-NC22NKTR NIN-NC27NKTR NIN-NC33NxTR NIN-NC39NxTR NIN-NC47NxTR NIN-NC56NxTR NIN-NC68NxTR NIN-NC82NxTR NIN-NCR10xTR NIN-NCR12xTR NIN-NCR15xTR NIN-NCR18xTR NIN-NCR22xTR NIN-NCR27xTR NIN-NCR33xTR NIN-NCR39xTR NIN-NCR47xTR NIN-NCR56xTR NIN-NCR68xTR NIN-NCR82xTR C SIZE (1008) 'L' Inductance (nH) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 Tolerance (std) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) (opt) ------------±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) HIGH FREQUENCY TYPE 'Q' Factor (min.) 10 10 10 10 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 L&Q Test Freq. 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz SRF Mhz (min.) 2500 2200 1800 1550 1350 1150 1000 890 770 670 590 520 460 400 340 300 260 230 200 180 160 145 130 100 DC Resistance (ohms) Max. 0.32 0.34 0.38 0.40 0.43 0.47 0.51 0.55 0.59 0.63 0.68 0.73 0.80 0.87 0.98 1.05 1.15 1.25 1.37 1.47 1.58 1.70 1.85 2.10 Rated DC Current (mA) Max. 280 270 255 250 240 230 220 215 205 200 190 185 175 170 160 155 145 140 135 130 125 120 110 100 ® 30 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-PC SERIES NIC P/N NIN-PC1R0MTR NIN-PC1R5MTR NIN-PC2R2MTR NIN-PC3R3MTR NIN-PC4R7MTR NIN-PC6R8KTR NIN-PC100KTR NIN-PC120KTR NIN-PC150KTR NIN-PC220KTR NIN-PC330KTR C SIZE (1008) 'L' Inductance (µH) 1.0 1.5 2.2 3.3 4.7 6.8 10 12 15 22 33 Tolerance (std) ±20% ±20% ±20% ±20% ±20% ±10% ±10% ±10% ±10% ±10% ±10% HIGH CURRENT TYPE (opt) ----------------------'Q' Factor (min.) 10 10 10 8 8 8 20 20 20 20 20 L&Q Test Freq. 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz SRF Mhz (min.) 95 85 65 55 43 39 32 25 21 18 16 DC Resistance (ohms) Max. 0.45 0.55 0.65 0.85 1.2 1.3 2.2 2.7 3.2 4.0 6.5 Rated DC Current (mA) Max. 475 435 390 340 285 275 210 195 175 160 120 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 31 Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-FA SERIES NIC P/N NIN-FAR22xTR NIN-FAR27xTR NIN-FAR33xTR NIN-FAR39xTR NIN-FAR47xTR NIN-FAR56xTR NIN-FAR68xTR NIN-FAR82xTR NIN-FA1R0xTR NIN-FA1R2xTR NIN-FA1R5xTR NIN-FA1R8xTR NIN-FA2R2xTR NIN-FA2R7xTR NIN-FA3R3xTR NIN-FA3R9xTR NIN-FA4R7xTR NIN-FA5R6xTR NIN-FA6R8xTR NIN-FA8R2xTR NIN-FA100xTR NIN-FA120xTR NIN-FA150xTR NIN-FA180xTR NIN-FA220xTR NIN-FA270xTR NIN-FA330xTR NIN-FA390xTR NIN-FA470xTR NIN-FA560xTR NIN-FA680xTR NIN-FA820xTR NIN-FA101xTR NIN-FA121xTR NIN-FA151xTR NIN-FA181xTR NIN-FA221xTR ® A SIZE (1210) 'L' Inductance (µH) 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 STANDARD TYPE (opt) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) Tolerance (std) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) 'Q' Factor (min.) 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 20 20 20 20 20 L&Q Test Freq. 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz SRF Mhz (min.) 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 36 33 30 27 25 22 20 20 15 15 15 11 10 10 8 7 7 DC Resistance (ohms) Max. 0.29 0.32 0.35 0.39 0.44 0.49 0.55 0.61 0.69 0.75 0.75 0.82 0.95 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.1 2.5 2.8 3.3 3.7 5.0 5.6 6.4 7.0 8.0 9.0 10 10 11 15 17 21 Rated DC Current (mA) Max. 360 345 330 305 290 275 260 245 230 215 210 200 190 180 180 175 165 160 150 140 140 125 120 110 105 90 85 80 75 70 65 60 60 55 50 50 45 32 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-NA SERIES NIC P/N NIN-NA47NMTR NIN-NA56NMTR NIN-NA68NMTR NIN-NA82NMTR NIN-NAR10MTR NIN-NAR12MTR NIN-NAR15MTR NIN-NAR18MTR NIN-NAR22KTR NIN-NAR27KxTR NIN-NAR33KTR NIN-NAR39KTR NIN-NAR47KTR NIN-NAR56KTR NIN-NAR68KTR NIN-NAR82KTR NIN-NA1R0JTR NIN-NA1R2JTR NIN-NA1R5JTR NIN-NA1R8JTR NIN-NA2R2JTR NIN-NA2R7JTR NIN-NA3R3JTR NIN-NA3R9JTR NIN-NA4R7JTR NIN-NA5R6JTR NIN-NA6R8JTR NIN-NA8R2JTR A SIZE (1210) 'L' Inductance (µH) 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 Tolerance ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) ±5% (J) HIGH FREQUENCY 'Q' Factor (min.) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 13 13 13 13 13 13 13 13 13 13 13 13 L&Q Test Freq. 100 Mhz 100 Mhz 100 Mhz 100 Mhz 100 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz SRF Mhz (min.) 680 600 540 500 450 400 350 320 280 250 220 200 180 160 150 135 120 110 95 85 80 70 62 57 52 46 42 38 DC Resistance (ohms) Max. 0.20 0.22 0.25 0.27 0.30 0.67 0.72 0.81 0.90 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.7 3.0 3.2 3.6 4.2 4.4 7.7 8.7 10 11 Rated DC Current (mA) Max. 450 420 400 380 360 240 230 220 210 200 190 180 175 170 155 145 125 120 115 110 110 105 100 95 70 65 60 60 ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 33 Molded Chip Wirewound Inductors NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com NIN-PA SERIES NIC P/N NIN-PA1R0MTR NIN-PA1R5MTR NIN-PA2R2MTR NIN-PA3R3MTR NIN-PA4R7MTR NIN-PA6R8MTR NIN-PA100KTR NIN-PA120KTR NIN-PA150KTR NIN-PA180KTR NIN-PA220KTR NIN-PA270KTR NIN-PA330KTR NIN-PA390KTR NIN-PA470KTR NIN-PA560KTR NIN-PA680KTR NIN-PA820KTR NIN-PA101KTR NIN-PA121KTR NIN-PA151KTR NIN-PA181KTR NIN-PA221KTR NIN-PA271KTR NIN-PA331KTR A SIZE (1210) 'L' Inductance (µH) 1.0 1.5 2.2 3.3 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 Tolerance (std) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) HIGH CURRENT TYPE (opt) ---------------------------------------------------------------------------'Q' Factor (min.) 7 7 7 7 7 7 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 L&Q Test Freq. 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 2.52 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz 0.796 Mhz SRF Mhz (min.) 150 110 80 58 46 38 23 21 18 17 15 13 12 11 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.0 3.5 3.0 DC Resistance (ohms) Max. 0.15 0.18 0.23 0.28 0.34 0.42 0.50 0.60 0.74 0.90 1.15 1.45 1.65 1.90 2.25 3.30 3.70 4.20 5.0 7.0 8.0 9.5 11.0 14.5 16.0 Rated DC Current (mA) Max. 600 550 500 400 350 300 240 230 220 205 185 165 155 145 135 110 105 100 90 75 70 65 60 55 50 ® 34 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Molded Chip Wirewound Inductors NIN-FB SERIES NIC P/N NIN-FBR10xTR NIN-FBR12xTR NIN-FBR15xTR NIN-FBR18xTR NIN-FBR22xTR NIN-FBR27xTR NIN-FBR33xTR NIN-FBR39xTR NIN-FBR47xTR NIN-FBR56xTR NIN-FBR68xTR NIN-FBR82xTR NIN-FB1R0xTR NIN-FB1R2xTR NIN-FB1R5xTR NIN-FB1R8xTR NIN-FB2R2xTR NIN-FB2R7xTR NIN-FB3R3xTR NIN-FB3R9xTR NIN-FB4R7xTR NIN-FB5R6xTR NIN-FB6R8xTR NIN-FB8R2xTR NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com SRF Mhz (min.) 700 500 450 400 350 320 300 250 220 180 160 140 100 80 70 60 55 50 45 40 35 33 27 25 DC Resistance (ohms) Max. 0.44 0.22 0.25 0.28 0.32 0.36 0.40 0.45 0.50 0.55 0.60 0.67 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.90 1.0 1.1 1.2 1.4 Rated DC Current (mA) Max. 450 450 450 450 450 450 450 450 450 450 450 450 450 430 410 390 380 370 355 330 315 300 285 270 B-SIZE (1812) 'L' Inductance (uH) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 Tolerance (std) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±20% (M) ±10% (K) ±10% (K) (opt) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±10% (K) ±5% (J) ±5% (J) STANDARD VALUES 'Q' Factor (min.) 28 30 30 30 30 30 30 30 30 30 30 30 50 50 50 50 50 50 50 50 50 50 50 50 L&Q Test Freq. 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 25.2 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz 7.96 Mhz ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 35 Molded Chip Wirewound Inductors NIN-FB SERIES ��� ��� ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ ������������ NIN Series For Quality Factor (Q) and Inductance (L) over Frequency curves see www.RFpassives.com B-SIZE (1812) ��� ���������� �µ�� �� �� �� �� �� �� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� STANDARD VALUES ����� ���������� ����� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ������ ������ �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ��� ���� ����� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ����� ��� ����� ��� ����� ��� ����� ��� ����� ��� ����� ��� ����� ��� ����� ��� ����� ��� ��� ��� ������ �� �� �� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� �� ���������� ������ ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� �� �� �� �� �� �� �� �� �� �� �� �� ����� �� ������� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� �� � ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� �� �� �� �� �� �� �� �� ® 36 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Molded Chip Wirewound Inductors PACKAGING SPECIFICATIONS t1 Perforation1.5φ±0.1 NIN Series F A t2 B E P 4.0 ±0.1 CARRIER TAPE DIMENSIONS (mm) Case Code B C D Type FC/NC/PC FA/NA/PA FB Size C A B W ±0.3 8.0 8.0 12.0 A ±0.2 2.4 2.8 3.6 B ±0.2 2.9 3.6 4.9 P ±0.1 4.0 4.0 8.0 E ±0.1 1.75 1.75 1.75 F ±0.1 3.5 3.5 5.5 t1 0.25 0.25 0.3 t2 1.85 2.4 3.5 2.0 ± 0.5 W DIMENSIONS (mm) Case Code B C D Type FC/NC/PC FA/NA/PA FB Size C A B D∅ ±2 180 180 180 W ±1.5 9.0 9.0 13.0 Qty/Reel 2000 pcs 2000 pcs 500 pcs 2.0 ± 0.5 ± 21 0. 8 50φ Min. 13φ ±0.5 W RECOMMENDED LAND PATTERNS FOR FLOW AND REFLOW SOLDERING NIN Chip Land Pattern C DIMENSIONS (mm) Type B C D FC/NC/PC FA/NA/PA FB Size C A B A 1.4~1.5 1.6~2.0 2.4~2.6 B 3.5~4.0 4.0~4.6 5.5~6.0 C 1.2~1.6 1.9~2.4 2.0~3.0 A B ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Dφ 37