NREHW330M45016X31F

Miniature Aluminum Electrolytic Capacitors HIGH VOLTAGE, RADIAL, POLARIZED, EXTENDED TEMPERATURE FEATURES • HIGH VOLTAGE/TEMPERATURE (UP TO 450VDC/+105°C) VOLTAGE/TEMPERATURE TO • NEW REDUCED SIZES CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current @ 20°C Max. Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. +105°C 2,000 Hours: 10φ & Up +105°C 1,000 Hours: 8φ Shelf Life Test +85°C 1,000 Hours with no load 160 ~ 450VDC 0.47 ~ 330µF -40°C ~ +105°C (160 ~ 400V) or -25°C ~ +105°C (450V) ±20% (M) NRE-HW Series includes all homogeneous materials *See Part Number System for Details RoHS Compliant CV ≤ 1000µF 0.03CV +15µA, CV > 1000µF 0.02 +25µA (after 2 minutes) W.V. S.V. Tan δ Z-25°C/Z+20°C Z-40°C/Z+20°C Capacitance Change Tan δ Leakage Current 160 200 0.20 3 6 200 250 0.20 3 6 250 300 0.20 3 6 350 400 0.25 4 8 400 450 0.25 6 10 450 500 0.25 6 - Within ±25% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Shall meet same requirements as in load life test E.S.R. (Ω AT 120Hz AND 20oC) W.V. (Vdc) Cap (µF) 160~250 350~450 0.47 706 882 1.0 332 415 2.2 151 188 3.3 101 126 4.7 70.6 86.2 10 33.2 41.5 22 15.1 18.8 33 10.1 12.6 47 7.06 8.82 68 4.88 6.10 100 3.32 4.15 150 2.21 220 1.51 330 1.01 - MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 105OC) Cap (µF) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 68 100 150 220 330 160 7 15 22 28 39 63 107 137 172 217 287 385 522 560 Working Voltage (Vdc) 200 250 350 400 8 8 10 10 16 18 20 20 24 25 28 28 32 34 36 36 40 41 47 47 64 66 70 70 112 119 123 126 147 154 158 161 175 182 182 189 228 235 242 249 301 302 308 403 412 532 450 18 28 36 47 70 125 154 172 189 - NREHW 100 M 350V 10X20 F... RoHS Compliant Case Size (Dφ x L) Working Voltage (Vdc) Tolerance Code (M=20%) Capacitance Code: First 2 characters significant, third character is multiplier Series PART NUMBER SYSTEM RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Cap. Value 20mm = 2.0mm Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 73