NREWB330M450V16X20

Miniature Aluminum Electrolytic Capacitors NRE-WB SERIES HIGH VOLTAGE, RADIAL LEADS, EXTENDED TEMPERATURE FEATURES • HIGH VOLTAGE (UP THROUGH 450VDC) • NEW REDUCED SIZES • +105OC EXTENDED TEMPERATURE AND LOAD LIFE includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS NRE-WB Series RoHS Compliant Rated Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance 200 ~ 450VDC 10 ~ 220µF -25°C ~ +105°C ±20% (M) W.V. S.V. Tan δ Z-25°C/Z+20°C Maximum Leakage Current @ 20°C Max. Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. +105°C 8,000 Hours: 10φ +105°C 10,000 Hours: 12.5φ & up up Shelf Life Test +105°C 1,000 Hours with no load 0.03CV +10µA after 2 minutes 200 250 350 250 300 400 0.15 0.15 0.20 3 3 4 400 450 0.24 6 450 500 0.24 6 Capacitance Change Tan δ Leakage Current Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Shall meet same requirements as in load life test MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 100KHz AND 105OC) Cap. (µF) 10 22 33 68 82 220 200 600 650 2000 Working Voltage (Vdc) 250 350 400 300 560 710 900 1000 1100 450 350 680 850 - MAXIMUM ESR (Ω AT 100KHz AND 20OC) Cap. (µF) 10 22 33 68 82 220 200 11.31 7.54 1.13 Working Voltage (Vdc) 250 350 400 450 39.81 39.81 11.31 18.09 7.54 12.06 12.06 3.66 4.05 - RIPPLE CURRENT FREQUECY CORRECTION FACTOR Cap. Value 100µF 50 0.30 0.35 Frequency (Hz) 120 1K 10K 0.40 0.70 0.90 0.45 0.75 0.90 100K 1.0 1.0 STANDARD PRODUCT AND CASE SIZE D φ x L (mm) Cap. (µF) Code 10 22 33 68 82 220 100 220 330 680 820 221 Working Voltage (Vdc) 200 250 350 400 10x20 10x20 10x20 10x20 12.5x20 16x20 16x20 18x25 18x31.5 450 12.5x20 16x20 18x25 - PART NUMBERING SYSTEM NREWB 100 M 400V 10X20 F . RoHS Compliant Case Size (Dφ x L) Working Voltage (Vdc) Tolerance Code (M=20%) Capacitance Code: First 2 characters significant, third character is multiplier LEAD SPACING AND DIAMETER (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim α 10 0.6 5.0 0.5 12.5 0.6 5.0 0.5 16 0.8 7.5 0.5 18 0.8 7.5 0.5 β = L < 20mm = 1.5mm, L > 20mm = 2.0mm Polarity Marking Insulation Sleeve dφ ± 0.05 Series F ± 0.5 ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS L + β max. 15mm Min. 4mm Min. Dφ ± α NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 81