NRLF222M63V35X20F

Large Can Aluminum Electrolytic Capacitors FEATURES • LOW PROFILE (20mm HEIGHT) • LOW DISSIPATION FACTOR AND LOW ESR • HIGH RIPPLE CURRENT • WIDE CV SELECTION • SUITABLE FOR SWITCHING POWER SUPPLIES SPECIFICATIONS Operating Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Max. Leakage Current (µA) After 5 minutes (20°C) W.V. (Vdc) Max. Tan δ at 120Hz/20°C Tan δ max. W.V. (Vdc) S.V. (Vdc) Surge Voltage W.V. (Vdc) S.V. (Vdc) Frequency (Hz) Ripple Current 16 ~ 100Vdc Multiplier at Correction Factors 85°C 160 ~ 450Vdc Temperature (°C) Low Temperature Capacitance Change Stability (16 to 250Vdc) Impedance Ratio Capacitance Change Load Life Test Tan δ 2,000 hours at +85°C Leakage Current Capacitance Change Shelf Life Test 1,000 hours at +85°C Tan δ (no load) Leakage Current Surge Voltage Test Capacitance Change Per JIS-C-5141 (table #6, #4) Tan δ Surge voltage applied: 30 seconds Leakage Current "On" and 5.5 minutes no voltage "Off" Capacitance Change Soldering Effect Refer to Tan δ MIL-STD-202F Method 210A Leakage Current MECHANICAL CHARACTERISTICS: -40 ~ +85°C 16 ~ 250Vdc 100 ~ 15,000µF ±20% (M) 3x 16 0.50 16 20 180 220 50 0.93 0.75 0 -5% 1.5 C(µF)V NRLF Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details -25 ~ +85°C 350 ~ 450Vdc 33 ~ 150µF 25 35 50 63 80 100 160~450 0.40 0.35 0.30 0.25 0.20 0.20 0.15 25 35 50 63 80 100 160 32 44 63 79 100 125 200 200 250 350 400 450 250 300 400 450 500 60 100 120 500 1K 10K ~ 50K 0.95 0.99 1.00 1.05 1.08 1.15 0.80 0.95 1.0 1.20 1.25 1.40 -25 -40 -10 -30% 3 9 Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±10% of initial measured value Less than specified maximum value Less than specified maximum value 1. Safety Vent:: The capacitors are provided with a pressure sensitive safety vent on the top. The vent is designed to rupture in the event that high internal gas pressure is developed by circuit malfunction or mis-use like reverse voltage. 2. Terminal Strength: Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 seconds. Sleeve Color: Dark Blue Can Top Safety Vent Insulation Sleeve and Minus Polarity Marking 0.8 D+1 Max. (-) (+) PC Board Mounting Holes: ∅= 2 ± 0.1 10 ± .1 Notice for Mounting The space from the top of the can shall be more than (3mm) from chassis or other construction materials so that safety vent has room to expand in case of emergency. MAXIMUM EXPANSION FOR SAFETY VENT Approx. 3.0mm PC Board 10 L±2 6.3 ± 1 D∅ ± 0.5 (4.0mm Leads Available As Option) Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 147 Large Can Aluminum Electrolytic Capacitors STANDARD PRODUCT LIST, CASE SIZE AND SPECIFICATIONS W.V. Cap (µF) 4,700 6,800 10,000 15,000 3,300 4,700 6,800 10,000 2,200 3,300 4,700 6,800 1,500 2,200 3,300 4,700 1,000 1,500 2,200 3,300 680 1,000 1,500 2,200 470 680 1,000 1,500 220 270 390 560 150 220 330 470 120 150 220 330 47 68 100 150 33 47 68 100 Case Size 22x20 25x20 30x20 35x20 22x20 25.x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 22x20 25x20 30x20 35x20 ESR (Ω @ 20°C) 120Hz 0.159 0.110 0.083 0.055 0.176 0.123 0.078 0.061 0.181 0.121 0.088 0.071 0.254 0.173 0.116 0.081 0.381 0.254 0.173 0.126 0.439 0.298 0.199 0.136 0.529 0.366 0.249 0.177 0.980 0.798 0.595 0.414 1.326 0.904 0.653 0.459 1.658 1.326 0.754 0.553 3.527 2.926 1.989 1.326 6.028 4.233 2.926 1.989 20KHz 0.135 0.093 0.070 0.047 0.141 0.099 0.062 0.049 0.136 0.090 0.066 0.053 0.191 0.130 0.087 0.061 0.286 0.191 0.130 0.094 0.329 0.244 0.149 0.102 0.344 0.238 0.162 0.115 0.490 0.399 0.298 0.207 0.597 0.407 0.294 0.206 0.663 0.531 0.301 0.221 1.235 1.024 0.696 0.464 2.411 1.693 1.17 0.796 Max. Ripple Current (Arms@85°C) 120Hz 10K ~ 50KHz 1.60 1.84 1.80 2.07 2.40 2.76 3.20 3.68 1.60 1.84 1.80 2.07 2.30 2.65 2.70 3.11 1.40 1.61 1.70 1.96 2.00 2.30 2.40 2.76 1.20 1.38 1.40 1.612 1.70 1.96 2.10 2.42 1.20 1.38 1.30 1.50 1.50 1.96 1.70 1.96 1.00 1.15 1.20 1.38 1.40 1.61 1.70 1.96 1.00 1.15 1.10 1.27 1.20 1.38 1.50 1.73 0.75 1.05 0.87 1.22 1.10 1.54 1.30 1.82 0.65 0.91 0.87 1.22 1.00 1.40 1.30 1.82 0.45 0.63 0.65 0.91 0.87 1.22 1.10 1.54 0.25 0.35 0.35 0.49 0.47 0.66 0.60 0.84 0.20 0.28 0.29 0.41 0.38 0.53 0.52 0.73 NRLF Series 16 25 35 50 63 80 100 160 200 250 400 450 PART NUMBER SYSTEM NRLF 152 M 50V 22X20 F RoHS compliant Case Size (mm) Voltage Rating Tolerance Code Capacitance Code ® Series 148 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com