NRSJ122M16V8X11.5TBF

Miniature Aluminum Electrolytic Capacitors ULTRA LOW IMPEDANCE AT ULTRA LOW IMPEDANCE AT HIGH FREQUENCY, RADIAL LEADS, FREQUENCY, LEADS, POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS FEATURES • VERY LOW IMPEDANCE includes all homogeneous materials • LONG LIFE AT 105°C (Up to 4000 Hrs.) *See Part Number System for Details • HIGH STABILITY AT LOW TEMPERATURE • IDEALLY SUITED FOR USE IN SWITCHING POWER SUPPLIES & ..CONVERTORS CHARACTERISTICS NRSK Series RoHS Compliant Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C Surge Voltage Ratings and Maximum Tan δ (add 0.02 for every 1,000µF for values above 1,000µF) Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test @ Rated W.V. & 105°C 2,000 hours for 8x11.5, 8x16, 10x12.5 and 10x16 3,000 hours for 8x20 4,000 hours for 10x20, 10x23 6.3 ~ 16 470 ~ 3,300µF -40°C ~ +105°C ± 20% (M) 0.03CV W.V. S.V. Tan δ @ 20°C/120Hz Z -25°C/Z +20°C Z -40°C/Z +20°C Capacitance Change Tan δ Leakage Current 6.3 8 0.22 2 3 10 13 0.19 2 3 16 20 0.16 2 3 Within ± 25% of initial measured value Less than 200% of the specified maximum value Less than specified maximum value MAXIMUM ESR (Ω AT 100KHz/20°C) Cap (µF) 470 680 820 1000 1200 1500 1800 2200 3300 Code 471 681 821 102 122 152 182 222 332 Working Voltage (Vdc) 6.3 10 16 0.036 0.028 0.036 0.026 0.036 0.028 0.019 0.030 0.026 0.019 0.028 0.019 0.019 0.013 0.026 0.019 0.019 0.013 0.012 0.013 0.012 0.012 - MAXIMUM RIPPLE CURRENT (mA AT 100KHz/105°C) Cap (µF) 470 680 820 1000 1200 1500 1800 2200 3300 Code 471 681 821 102 122 152 182 222 332 Working Voltage (Vdc) 6.3 10 16 1140 1490 1140 1540 1140 1490 1870 1140 1540 2000 1490 1870 1870 2550 1540 1870 2000 2550 2800 2550 2800 2800 - PART NUMBERING SYSTEM NRSK 102 M 16V 10x16 TB F RoHS Compliant Tape and Box* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series *see tape specification for details ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 111 Miniature Aluminum Electrolytic Capacitors STANDARD PRODUCT AND CASE SIZE TABLE DΦ x L (mm) Cap (µF) 470 680 820 1000 1200 1500 1800 2200 3300 Code 471 681 821 102 122 152 182 222 332 6.3 8x11.5 8x11.5 8x16 8x20 10x12.5 10x16 10x20 10x23 Working Voltage (Vdc) 10 8x11.5 8x16 10x12.5 8x20 10x16 10x20 10x23 16 8x11.5 8x16 10x12.5 8x20 10x16 10x20 10x23 - NRSK Series DIAMETER AND LEADSPACE (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α 8 0.6 3.5 0.5 10 0.6 5.0 0.5 Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 β = L < 16mm = 1.5mm, L > 20mm = 2.0mm L + β max. 15mm Min. 4mm Min. Dφ ± α ® 112 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com