NRSS220M35VTRF

Miniature Aluminum Electrolytic Capacitors RADIAL LEADS, POLARIZED, NEW REDUCED CASE SIZING (FURTHER REDUCED FROM NRSA SERIES) EXPANDED TAPING AVAILABILITY NRSS Series (today’s standard) NRSA (reduced sizes) NRSS includes all homogeneous materials *See Part Number System for Details 6.3 ~ 100 VDC 10 ~ 10,000µF -40 ~ +85°C + 20% 0.03CV or 4µA , whichever is greater 0.01CV or 3µA , whichever is greater 100 63 50 35 25 16 10 6.3 W.V. (Vdc) 125 79 63 44 32 20 13 8 S.V. (Vdc) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 C < 1,000µF 0.30 0.26 0.22 0.18 0.16 0.14 C = 2,200µF 0.32 0.28 0.24 0.20 0.18 0.18 C = 3,300µF 0.34 0.30 0.26 0.22 0.20 C = 4,700µF 0.36 0.32 0.28 0.24 C = 6,800µF 0.38 0.34 0.30 C = 10,000µF 2 2 2 2 2 3 4 5 Z-25°C/Z+20°C 4 4 4 4 5 8 10 12 Z-40°C/Z+20°C Within +20% of initial measured value Capacitance Change Less than 200% of specified maximum value Tan δ Less than specified maximum value Leakage Current Within +20% of initial measured value Capacitance Change Less than 200% of specified maximum value Tan δ Less than specified maximum value Leakage Current RoHS Compliant CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance After 1 min. Max. Leakage Current @ (20oC) After 2 min. Max. Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. 85°C 2,000 Hours Shelf Life Test 85°C 1,000 Hours No Load PERMISSIBLE RIPPLE CURRENT (mA rms AT 120Hz AND 85OC) ��� �µ�� �� �� �� �� ��� ��� ��� ��� ����� ����� ����� ����� ����� ������ MAXIMUM E.S.R. (Ω AT 120HZ AND 20OC) �� � � ��� � � ��� ��� ��� ���� ���� ���� � � � ������� ������� ����� ��� � � � � � � � ��� ��� ��� ���� ���� ���� ���� �� � � � � � ��� ��� ��� ��� ��� ���� ���� ���� ���� �� � � � � ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� �� � � � � � � ��� ��� ��� ���� ���� ���� ���� � �� � � � ��� ��� ��� ��� ��� ���� ���� ���� ���� � � �� � ��� � ��� ��� ��� ��� ��� ���� � � � � � ��� �� ��� ��� ��� ��� ��� ��� ���� � � � � � � ��� �µ�� �� �� �� �� ��� ��� ��� ��� ����� ����� ����� ����� ����� ������ ������� ������� ����� �� �� �� �� �� ��� � � � � � � � � � � � � � � � � � ���� � � � � � ���� � � � � ���� ���� � � ���� ���� ���� ���� � ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ����� ����� � ���� ���� ����� ����� ����� ����� ����� ����� ����� � � � � ����� ����� ����� � �� � ���� � ���� ���� ���� ���� ���� ���� � � � � � ��� ���� ���� ���� ���� ���� ���� ���� ���� � � � � � � RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency (Hz) ~ 47µF 100 ~ 470µF 1000µF ~ 50 0.75 0.80 0.85 120 1.00 1.00 1.00 300 1.35 1.23 1.10 1K 1.57 1.34 1.13 10K 2.00 1.50 1.15 ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 47 Miniature Aluminum Electrolytic Capacitors STANDARD PRODUCT AND CASE SIZE TABLE D φ x L (mm) ����µ�� �� �� �� �� ��� ��� ��� ��� ���� ���� ���� ���� ���� ������ NRSS Series ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ������� ������� ������ ��� � � � � � � � ��� � �� � � ���� �� � �� �� � �� ���� � �� ���� � �� �� � �� �� � � � � � � � �� ��� � �� ��� � �� �� � ���� �� � �� ���� � �� ���� � �� �� � �� �� � �� �� � � � � � � �� ��� � �� ��� ���� � � ���� �� � �� ���� � �� ���� � �� �� � �� �� � �� �� � �� �� � � � ��� ���� ��� ���� ��� ���� � � ���� �� � ���� �� � �� ���� � �� �� � �� �� � �� �� � �� � �� � � ��� ���� � � �� ��� � �� � � ���� �� � ���� �� � �� ���� � �� �� � �� �� � �� �� � �� � � �� � � � � �� ��� ���� ��� ���� �� � ���� �� � �� �� � �� ���� � �� �� � �� �� � �� � � � �� � � � �� ��� ���� ��� � �� � � ���� �� � �� �� � �� ���� � �� �� � �� � � � � � ��� ��� � �� � � ���� � � ���� �� � ���� �� � �� ���� � �� ���� � �� �� � �� � � � � � � LEAD SPACING AND DIAMETER (mm) Case Dia. (D∅) Leads Dia. (d∅) Lead Spacing (F) Dim. α DIMENSIONS (mm) 16 0.8 7.5 0.5 5 0.5 2.0 0.5 6.3 0.5 2.5 0.5 8 0.6 3.5 0.5 10 0.6 5.0 0.5 12.5 0.6 5.0 0.5 18 0.8 7.5 0.5 22 0.8 10 1.0 Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 β = L < 20mm = 1.5mm, L > 20mm = 2.0mm L + β max. 15mm Min. 4mm Min. Dφ ± α PART NUMBERING SYSTEM NRSS 101 M 35V 6.3X11 TR RoHS Compliant Tape and Reel* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code F Series *see tape specification for details ® 48 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com