NSPE331MV6.3X6.3TR13F

Hybrid Surface Mount Aluminum Electrolytic Capacitors FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • SUPER LOW ESR & HIGH RIPPLE CURRENT RoHS • CAPACITANCE VALUES UP TO 820µF Compliant includes all homogeneous materials • 6.3x6.3mm ~ 10x10.8mm CASE SIZES • DESIGNED FOR REFLOW SOLDERING *See Part Number System for Details CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C Working and Surge Voltage Ratings Tan δ @ 120Hz/20°C Impedance Ratio Load Life Test @ 105°C 6.3mm Dia. and All 4Vdc parts = 1,000 Hours 8mm ~ 10mm Dia. parts = 2,000 Hours 4 ~ 10Vdc 22 ~ 820µF -55 ~ +105°C ±20% (M) Less than 0.1CV or 50µA whichever is greater W.V. (Vdc) S.V. (Vdc) All Case Sizes Z -55°C/Z +20°C Z +105°C/Z +20°C Capacitance Change Tan δ Leakage Current LOW ESR COMPONENT HYBRID ELECTROLYTE For Performance Data see www.LowESR.com NSPE Series 6.3 10 7.2 11.5 0.22 0.20 2.5 1.0 Within ±20% of initial measured value Less than 200% of specified max. value Less than specified max. value 4 4.6 0.24 MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 100KHz AND 105OC) Working Votage (Vdc) 4.0 6.3 10 22 1,020 33 1,020 47 1,020 100 1,120 1,550 150 1,550 220 1,550 1,550 1,550* 330 1,550 2090 390 1,550 2,090 470 1,550 2,090 2,090* 560 2,090 680 2,090 820 2,180 *Low temperature reflow soldering only Cap. (µF) MAXIMUM ESR (mΩ AT 100KHz AND 20OC) Working Votage (Vdc) 4.0 6.3 10 22 60 33 60 47 60 100 50 30 150 30 220 30 30 30* 330 30 25 390 30 25 470 30 25 25* 560 25 680 25 820 23 *Low temperature reflow soldering only Cap. (µF) PART NUMBER SYSTEM NSPE 471 M 4V 8x10.8 TR 13 F RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF Series Part Marking Series Code Lot Code E17 470 4V Capacitance Value Voltage Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 51 Hybrid Aluminum Electrolytic Capacitors STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm) Working Voltage (Vdc) 4.0 6.3 10 22 220 6.3 x 6.3 33 330 6.3 x 6.3 47 470 6.3 x 6.3 100 101 6.3 x 6.3 8 x 10.8 150 151 8 x 10.8 220 221 8 x 10.8 8 x 10.8 8 x 10.8* 330 331 8 x 10.8 10 x 10.8 390 391 8 x 10.8 10 x 10.8 10 x 10.8 10 x 10.8* 470 471 8 x 10.8 560 561 10 x 10.8 680 681 10 x 10.8 820 821 10 x 10.8 *Low temperature reflow soldering only Cap (µF) Code NSPE Series Dφ 0.3mm max. L + W I I - A DIMENSIONS (mm) Dφ ±0.5 6.3 8.0 10 L max. 6.3 10.8 10.8 A/B ±0.2 6.8 8.3 10.3 W 0.5 ~ 0.8 0.7 ~ 1.0 1.1 ~ 1.4 I ±0.2 2.55 2.9 3.2 P ±0.2 2.2 3.2 4.6 P B PEAK TEMPERATURE AND DURATION Preheat (120 sec. max.) 6.3mm/4V ~ 10V 150°C ~ 180°C 8.0mm/4V ~ 10V 150°C ~ 180°C 10mm/4V ~ 10V 150°C ~ 180°C NSPE471M6.3V10x10.8TRxxF 150°C ~ 180°C NSPE331M10V8x10.8TRxxF