NSRW4R7M10V6.3X5TBF

Miniature Aluminum Electrolytic Capacitors LOW IMPEDANCE, SUBMINIATURE, RADIAL LEADS, POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS FEATURES • VERY LOW IMPEDANCE AT HIGH FREQ AND HIGH RIPPLE CURRENT • 5mm HEIGHT, LOW PROFILE • SUITABLE FOR DC-DC CONVERTER OR DC-AC INVERTER SUITABLE CONVERTER DC-AC INVERTER NSRZ Series CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temperature Range Max. Leakage Current After 1 minute At 20oC Surge Voltage & Max. Tan δ Low Temperature Stability (Impedance Ratio At 120Hz) Load Life Test 105oC 1,000 Hours 6.3 ~ 35Vdc 0.47 ~ 180µF -55~+105OC 0.01CV or 3µA, whichever is greater W.V. (Vdc) S.V. (Vdc) Tan δ at 120Hz/20oC W.V. (Vdc) Z-40oC/Z+20oC Z-55oC/Z+20oC Capacitance Change Tan δ Leakage Current includes all homogeneous materials *See Part Number System for Details RoHS Compliant 6.3 8 0.24 6.3 3 5 10 16 25 35 13 20 32 44 0.20 0.16 0.14 0.12 10 16 25 35 2 2 2 2 4 4 3 3 Within + 25% of initial measured value Less than 200% of specified value Less than specified value STANDARD PRODUCTS, CASE SIZES AND SPECIFICATIONS Dφ x L (mm) W.V. (Vdc) 6.3 Cap (µF) 27 56 100 180 18 33 68 120 12 22 47 68 120 8.2 15 22 33 47 4.7 8.2 10 15 22 33 Code 270 560 101 181 180 330 680 121 120 220 470 680 121 8R2 150 220 330 470 4R7 8R2 100 150 220 330 Case Size D∅ xLmm 4x5 5x5 6.3x5 6.3x5 4x5 5x5 6.3x5 6.3x5 4x5 5x5 6.3x5 6.3x5 6.3x5 4x5 5x5 5x5 6.3x5 6.3x5 4x5 4x5 5x5 5x5 5x5 6.3x5 Max. Z(Ω) Max. Ripple Current (mA) 100KHz & 20oC 10K-500KHz & 105oC 1.80 80 0.76 150 0.44 230 0.47 230 1.80 80 0.76 150 0.44 230 0.47 230 1.80 80 0.81 150 0.44 230 0.44 230 0.47 230 1.80 80 0.81 150 0.81 150 0.44 230 0.47 230 1.80 80 1.80 80 0.81 150 0.81 150 0.81 150 0.44 230 PART NUMBER SYSTEM NSRZ 220 M 35V 5x5 TB F 10 RoHS Compliant Tape and Box Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series 16 LEAD SPACING AND DIAMETER (mm) Case Dia. (D∅) Leads Dia. (d∅) Lead Spacing (F) Dim. α Dim. β 4 0.45 1.5 0.5 1.0 5 0.45 2.0 0.5 1.0 6.3 0.45 2.5 0.5 1.0 25 35 Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: tpmg@niccomp.com PRECAUTIONS NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 105