GYA1E221MCQ1GS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYA Chip Type, 125°C High Reliability High Reliability, Low ESR,High ripple current. Long life of 4000 hours at 125°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. GYC High Temperature GYA High Capacitance GYE Specifications Item Performance Characteristics – 55 to +125°C Rated Voltage Range 16 to 80V Rated Capacitance Range 10 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Category Temperature Range Tangent of loss angle (tan δ) 16 0.16 Rated voltage (V) tan δ (max.) 25 0.14 35 0.12 50 0.10 63 0.08 120Hz 20°C 80 0.08 Less than or equal to the specified value at 100kHz, 20°C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). 80V : After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05 CV(μA). Z(– 25°C) / Z(+20°C) 2 Z(– 55°C) / Z(+20°C) 2.5　(100kHz) ESR Leakage Current ※ Temperature Characteristics (Max.Impedance Ratio) Endurance Within ± 30% of initial capacitance value 200% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 4000 hours at 125°C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C, 85% RH. Capacitance change tan δ Leakage current Within±30% of the initial capacitance value 200% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Capacitance change tan δ Leakage current Within±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Marking Black print on the case top. 0.3 max. Plastic platform C±0.2 Voltage (V:35V) Series 0.3 max. C±0.2 Capacitance L ±0.3 Lot No. Capacitance L ±0.3 Type numbering system (Example : 35V 47µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 GY A 1 V 4 7 0 MCQ 1 GS E E φD±0.5 φD±0.5 Lot No. Positive Taping code A±0.2A±0.2 Series B±0.2B±0.2 Voltage (V:35V) 0.5 max. 0.5 max. Plastic platform (φ6.3 )【Standard】 A1 A1 47V 47V GYAGYA ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Positive (φ6.3 )【Standard】 Dimensions Size code Configuration Capacitance tolerance (±20%) Negative H Rated voltage (35V) Negative H Size Code Q Standard Vibration Resistance W Rated capacitance (47µF) Series name Type Lot No. Lot No. Capacitance Capacitance 0.3 max. 0.3 max. C±0.2 C±0.2 B±0.2 B±0.2 φD±0.5 φD±0.5 Plastic platform L ± 0.5 L ± 0.5 Dimension table in next page. H H (mm) 10 × 10 10 × 12.5 A 7.3 9.0 11.0 11.0 8.3 10.3 10.3 B 6.6 8.3 10.3 10.3 C 6.6 6.6 8.3 10.3 10.3 C 6.6 8.3 10.3 10.3 E 2.2 2.2 3.1 4.5 4.5 E 2.2 3.1 4.5 4.5 5.8 7.7 10.3 10.3 12.5 L 7.7 10.5 10.5 12.8 L H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Voltage H Negative Code C H 0.5 to 0.8 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Frequency coefficient of rated ripple current E V H J K Frequency 120Hz 1kHz­ 10kHz 100kHz or more Coefficient 0.15 0.40 0.75 1.00 Positive Positive (φ8, φ10 )【Vibration Resistance】 (φ8, φ10 )【Vibration 】 platform Plastic SeriesResistance Voltage (H:50V) Voltage (H:50V) Trade mark Plastic platform Series Trade mark Negative Negative 6.3 × 7.7 8 × 10 6.6 Negative E E Series Series n2n2 68V 68V GYA GYA Voltage (V:35V) Voltage (V:35V) φD×L 6.6 A H Positive Positive Vibration Resistance B V 16 25 35 50 63 80 (φ6.3 )【Vibration Resistance】 (φ6.3 )【Vibration Resistance】 Plastic platform 10 × 10 10 × 12.5 11.0 11.0 Lot No. Lot No. Capacitance Capacitance 0.3 max. 0.3 max. C±0.2 C±0.2 L ± 0.5 L ± 0.5 H H A±0.2 A±0.2 Capacitance L ±0.5 8 × 10 9.0 0.5 0.5 max. max. L ±0.5 (mm) 6.3 × 5.8 6.3 × 7.7 7.3 7.3 B±0.2 B±0.2 Lot No. Capacitance φD×L n2n2 68H 68H GYA GYA Lot No. φD±0.5 φD±0.5 A1 A1 56J 56J GYAGYA Trade mark Standard φD±0.5 φD±0.5 0.3 max. C±0.2 A±0.2A±0.2 C±0.2 0.5 max. 0.5 max. 0.3 max. Plastic platform E Series (φ8, φ10 )【Standard】 Positive E Trade mark Voltage (J:63V) Plastic platform 0.5 0.5 max. max. Series B±0.2B±0.2 Voltage (J:63V) A±0.2 A±0.2 (φ8, φ10 )【Standard】 E E Positive Negative Negative Aid electrode Aid electrode CAT.8100L CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYA Dimensions Rated Capacitance （µF） Rated Voltage （V） （code） 16 （1C） 25 （1E） 35 （1V） 50 （1H） 63 （1J） 80 （1K） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 2 minutes （ ） ESR（mΩ）max. （20℃/100kHz） Rated Ripple （mArms） （125℃/100kHz） Part Number 82 6.3× 5.8 0.16 13.12 50 1000 GYA1C820MCQ1GS 150 6.3× 7.7 0.16 24.00 30 1500 GYA1C151MC□1GS 270 8× 10 0.16 43.20 25 1700 GYA1C271MC□1GS 470 10× 10 0.16 75.20 20 2100 GYA1C471MC□1GS 47 6.3× 5.8 0.14 11.75 50 900 GYA1E470MCQ1GS 56 6.3×5.8 0.14 14.00 50 900 GYA1E560MCQ1GS 68 6.3×7.7 0.14 17.00 30 1400 GYA1E680MC□1GS 100 6.3×7.7 0.14 25.00 30 1400 GYA1E101MC□1GS 150 8×10 0.14 37.50 27 1600 GYA1E151MC□1GS 220 8×10 0.14 55.00 27 1600 GYA1E221MC□1GS 270 10× 10 0.14 67.50 20 2000 GYA1E271MC□1GS 330 10× 10 0.14 82.50 20 2000 GYA1E331MC□1GS 470 10× 12.5 0.14 117.50 16 2300 GYA1E471MC□1GS 33 6.3× 5.8 0.12 11.55 60 900 GYA1V330MCQ1GS 47 6.3×5.8 0.12 16.45 60 900 GYA1V470MCQ1GS 68 6.3×7.7 0.12 23.80 35 1400 GYA1V680MC□1GS 100 8×10 0.12 35.00 27 1600 GYA1V101MC□1GS 150 8×10 0.12 52.50 27 1600 GYA1V151MC□1GS 220 10× 10 0.12 77.00 20 2000 GYA1V221MC□1GS 270 10× 10 0.12 94.50 20 2000 GYA1V271MC□1GS 330 10× 12.5 0.12 115.50 16 2300 GYA1V331MC□1GS 22 6.3× 5.8 0.10 11.00 80 750 GYA1H220MCQ1GS 33 6.3× 7.7 0.10 16.50 40 1100 GYA1H330MC□1GS 47 8× 10 0.10 23.50 30 1250 GYA1H470MC□1GS 68 8× 10 0.10 34.00 30 1250 GYA1H680MC□1GS 100 10×10 0.10 50.00 28 1600 GYA1H101MC□1GS 120 10× 10 0.10 60.00 28 1600 GYA1H121MC□1GS 150 10× 12.5 0.10 75.00 18 2000 GYA1H151MC□1GS 10 6.3× 5.8 0.08 6.30 120 700 GYA1J100MCQ1GS 22 6.3× 7.7 0.08 13.86 80 900 GYA1J220MC□1GS 33 8× 10 0.08 20.79 40 1100 GYA1J330MC□1GS 47 8× 10 0.08 29.61 40 1100 GYA1J470MC□1GS 56 10× 10 0.08 35.28 30 1400 GYA1J560MC□1GS 68 10× 10 0.08 42.84 30 1400 GYA1J680MC□1GS 82 10× 10 0.08 51.66 30 1400 GYA1J820MC□1GS 100 10× 12.5 0.08 63.00 20 1900 GYA1J101MC□1GS 22 8× 10 0.08 88.00 45 1100 GYA1K220MC□1GS 33 10× 10 0.08 132.00 36 1300 GYA1K330MC□1GS 47 10× 10 0.08 188.00 36 1300 GYA1K470MC□1GS □ : Enter the appropriate configuration code. Blue : New product（as of October 2022） For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L