GYA1H220MCQ1GS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYA Chip Type, 125°C High Reliability High Reliability, Low ESR,High ripple current. Long life of 4000 hours at 125°C. Adapted to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. GYC GYA High Te m p e rature Specifications Item Performance Characteristics Category Temperature Range – 55 to +125°C Rated Voltage Range 16 to 63V Rated Capacitance Range 10 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) 16 0.16 Rated voltage (V) tan δ (MAX.) 25 0.14 35 0.12 50 0.10 63 0.08 120Hz 20°C Less than or equal to the specified value at 100kHz, 20°C ESR Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics (Max.Impedance Ratio) Z– 25°C / Z+20°C Z– 55°C / Z+20°C Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 4000 hours ( 2000 hours for φ 6.3 rated at 16V ) at 125°C, the peak voltage shall not exceed the rated voltage. 2 2.5　(100kHz) Within ± 30% of initial capacitance value 200% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR Leakage current After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. Capacitance change tan δ Leakage current Within±30% of the initial capacitance value 200% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Capacitance change tan δ Leakage current Within±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Marking Black print on the case top. Dimensions Type numbering system (Example : 35V 47µF) Positive (φ6.3 ) Series 0.3 MAX. 1 0.5 MAX. Plastic platform Voltage (V:35V) C±0.2 2 3 4 5 6 7 8 9 10 11 12 13 14 GY A 1 V 4 7 0 MCQ 1 GS Taping code A±0.2 E B±0.2 φD±0.5 A1 47V GYA Size code Configuration Capacitance tolerance (±20%) Rated capacitance (47µF) Lot No. L ±0.3 Capacitance Rated voltage (35V) Negative H Series name Type Positive Series 0.3 MAX. Capacitance B±0.2 φD±0.5 A1 56J GYA Lot No. C±0.2 L ±0.5 E Voltage (J:63V) Trade mark 0.5 MAX. Plastic platform H (mm) φD×L A A±0.2 (φ8, φ10 ) Negative Dimension table in next page. 112 φ6.3 × 5.8 φ6.3 × 7.7 7.3 7.3 φ8 × 10 9.0 φ10 × 10 11.0 B 6.6 6.6 8.3 10.3 C 6.6 6.6 8.3 10.3 E 2.2 2.2 3.1 4.5 L 5.8 7.7 10.3 10.3 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Voltage V 16 25 35 50 63 Code C E V H J φ6.3× 7.7L , φ8× 10L, φ10×10L : The vibration structure-resistant product is also available upon request, please ask for details. CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYA Dimensions Co Cap.(µF) V (Code) 16 25 35 50 63 de 1C 1E 1V 1H 1J 10 100 22 220 6.3 × 5.8 80 33 330 6.3 × 7.7 40 47 470 56 560 68 680 82 820 100 101 150 151 220 221 270 271 330 331 470 471 6.3 × 5.8 6.3 × 5.8 50 50 30 25 20 750 6.3 × 7.7 80 900 1100 8 × 10 40 1100 10 × 10 30 1400 900 35 1400 1400 27 8 × 10 30 1250 10 × 10 28 1600 20 8 × 10 27 1600 10 × 10 20 2000 1600 1700 10 × 10 10 × 10 30 1500 8 × 10 8 × 10 700 1000 6.3 × 7.7 6.3 × 7.7 120 900 6.3 × 7.7 6.3 × 5.8 60 6.3 × 5.8 2000 φD×L 2100 ESR Ripple mΩ mArms ESR at 20°C 100kHz Rated ripple Current at 125°C 100kHz Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 120Hz 0.15 1kHz­ 0.40 10kHz 100kHz or more 0.75 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18,19. Please refer to page 3 for the minimum order quantity. 113