GYA1V680MCQ1GS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYA NEW Chip Type, 125°C High Reliability High Reliability, Low ESR,High ripple current. Long life of 4000 hours at 125°C. Adapted to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range – 55 to +125°C Rated Voltage Range 25 to 63V Rated Capacitance Range 10 to 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 25 0.14 35 0.12 50 0.10 63 0.08 ESR Less than or equal to the specified value at 100kHz, 20°C Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 4000 hours at 125°C, the peak voltage shall not exceed the rated voltage. 120Hz 20°C Within ± 30% of initial capacitance value 200% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR Leakage current After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. Capacitance change tan δ Leakage current Within±30% of the initial capacitance value 200% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After solderling the Capacitor, After restored at room temperature, they meet the characteristics requirements listed below. Capacitance change tan δ Leakage current Within±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Marking Black print on the case top. Lot No. 0.3 MAX. C±0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 GY A 1 V 4 7 0 MCQ 1 GS Taping code Size code B±0.2 Capacitance tolerance (±20%) Rated capacitance (47µF) Rated voltage (35V) L ± 0.3 Capacitance A±0.2 Configuration φD±0.5 a1 47V GYA Series 0.5 MAX. Plastic platform E Voltage (V:35V) Type numbering system (Example : 35V 47µF) Positive Dimensions Negative H Series name 10L : ±0.5 (mm) φD×L A φ6.3 × 5.8 φ6.3 × 7.7 7.3 7.3 φ8 × 10 9.0 φ10 × 10 11.0 B 6.6 6.6 8.3 10.3 C 6.6 6.6 8.3 10.3 E 2.2 2.2 3.1 L 5.8 7.7 10.3 H Type Specifications Cap. (µF) V 25 35 50 Code 1E 1V 1H 63 1J 6.3 × 5.8 120 10 100 4.5 22 220 6.3 × 5.8 80 10.3 33 330 6.3 × 7.7 40 1100 47 470 56 560 8 × 10 30 1250 10 × 10 28 1600 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Voltage V 25 35 50 63 68 680 Code E V H J 100 101 150 151 220 221 270 271 330 331 6.3 × 5.8 6.3 × 7.7 50 30 6.3 × 5.8 60 900 6.3 × 7.7 35 1400 8 × 10 27 1600 10 × 10 20 2000 750 6.3 × 7.7 900 1400 8 × 10 27 1600 10 × 10 20 2000 8 × 10 700 80 900 40 1100 10 × 10 30 1400 φD×L ESR Ripple mΩ mArms ESR:100kHz,20°C Rated ripple Current 100kHz,125°C