GYB1J220MCQ1GS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYB NEW Chip Type, 105°C High Reliability High Reliability, Low ESR,High ripple current. Long life of 10000 hours at 105°C. Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 25 to 63V Rated Capacitance Range 10 to 330µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) 25 0.14 Rated voltage (V) tan δ (MAX.) 35 0.12 50 0.10 63 0.08 120Hz 20°C Less than or equal to the specified value at 100kHz, 20°C ESR Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics (Max.Impedance Ratio) Z– 25°C / Z+20°C Z– 55°C / Z+20°C Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours at 105°C, the peak voltage shall not exceed the rated voltage. 2 2.5　(100kHz) Within ± 30% of initial capacitance value 200% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR Leakage current After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C, 85% RH. Capacitance change tan δ Leakage current Within±30% of the initial capacitance value 200% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After solderling the Capacitor, After restored at room temperature, they meet the characteristics requirements listed below. Capacitance change tan δ Leakage current Within±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Marking Black print on the case top. Dimensions Series 0.3 MAX. 1 0.5 MAX. Plastic platform Voltage (V:35V) Type numbering system (Example : 35V 47µF) Positive (f6.3 ) C±0.2 2 3 4 5 6 7 8 9 10 11 12 13 14 GY B 1 V 4 7 0 MCQ 1 GS Taping code A±0.2 E B ±0.2 fD±0.5 A1 47V GYB Size code Configuration Capacitance tolerance (±20%) Rated capacitance (47µF) Lot No. L ±0.3 Capacitance Rated voltage (35V) Negative H Series name Type Positive Series 0.3 MAX. Capacitance B ±0.2 fD±0.5 A1 56 J GYB Lot No. C±0.2 L ±0.5 E Voltage (J:63V) Trade mark 0.5 MAX. Plastic platform H (mm) fD×L A A±0.2 (f8, f10 ) Negative f6.3 × 5.8 f6.3 × 7.7 7.3 7.3 f8 × 10 9.0 f10 × 10 11.0 B 6.6 6.6 8.3 10.3 C 6.6 6.6 8.3 10.3 E 2.2 2.2 3.1 4.5 L 5.8 7.7 10.3 10.3 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Voltage V 25 35 50 63 Code E V H J CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYB Specifications V (Code) Cap.(µF) Co de 25 35 50 63 1E 1V 1H 1J 10 100 22 220 6.3 × 5.8 80 33 330 6.3 × 7.7 40 47 470 56 560 68 680 100 101 150 151 220 221 270 271 330 331 6.3 × 5.8 6.3 × 5.8 50 8 × 10 10 × 10 30 27 20 120 1000 1100 6.3 × 7.7 80 1500 1600 8 × 10 40 1600 10 × 10 30 1800 fD×L ESR mΩ 1300 1300 6.3 × 7.7 6.3 × 7.7 60 6.3 × 5.8 35 2000 2000 8 × 10 27 2300 10 × 10 20 2500 8 × 10 30 1800 10 × 10 28 2000 2300 2500 Ripple mArms ESR at 20°C 100kHz Rated ripple Current at 105°C 100kHz Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 120Hz 0.15 1kHz­ 0.40 10kHz 100kHz or more 0.75 1.00 April 2018