GYC1V271MCW1GS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYC Chip Type, 135°C High Reliability GYD High Reliability, Low ESR,High ripple current. Long life of 2000 to 4000 hours at 135°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. High Temperature GYC High Temperature Specifications GYA Item Performance Characteristics – 55 to +135°C 16 to 63V Rated Capacitance Range 10 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range 16 0.16 Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 25 0.14 35 0.12 50 0.10 120Hz 20°C 63 0.08 Less than or equal to the specified value at 100kHz, 20°C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Z(– 25°C) / Z(+20°C) 2 Z(– 55°C) / Z(+20°C) 2.5　(100kHz) ESR Leakage Current ※ ※ Temperature Characteristics (Max.Impedance Ratio) Within ± 30% of initial capacitance value 200% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 4000 hours (2000 hours for φD = 6.3) at 125°C or 135°C, the peak voltage shall not exceed the rated voltage. Endurance After storing the capacitors under no load at 135°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C, 85% RH. Capacitance change tan δ Leakage current Within±30% of the initial capacitance value 200% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Capacitance change tan δ Leakage current Within±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Marking Black print on the case top. Positive Series 0.3 max. Plastic platform C±0.2 Voltage (V:35V) Series 0.3 max. C±0.2 Lot No. Capacitance Lot No. L ±0.3 ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Type numbering system (Example : 35V 47µF) 1 E H L ±0.3 Capacitance Positive E φD±0.5 φD±0.5 A1 A1 47V 47V GYCGYC (φ6.3 )【Standard】 B±0.2B±0.2 Voltage (V:35V) 0.5 max. 0.5 max. Plastic platform A±0.2A±0.2 (φ6.3 )【Standard】 Dimensions H 2 3 4 5 6 7 8 9 10 11 12 13 14 GYC 1 V 4 7 0 MCQ 1 GS Taping code Size code Configuration Negative Capacitance tolerance (±20%) Negative Rated voltage (35V) Rated capacitance (47µF) Size Code Standard Q Vibration Resistance W Series name Type Positive E Negative H Negative H Positive (φ6.3 )【Vibration Resistance】 Lot No. Lot No. Capacitance Capacitance C±0.2 L ±0.5 L ±0.5 Dimension table in next page. H H Negative 6.3 × 7.7 8 × 10 (mm) 10 × 10 10 × 12.5 A 7.3 9.0 11.0 11.0 6.6 8.3 10.3 10.3 B 6.6 8.3 10.3 10.3 C 6.6 6.6 8.3 10.3 10.3 C 6.6 8.3 10.3 10.3 E 2.2 2.2 3.1 4.5 4.5 E 2.2 3.1 4.5 4.5 L 5.8 7.7 10.3 10.3 12.5 L 7.7 10.5 10.5 12.8 H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 V 16 25 35 50 63 Code C H 0.5 to 0.8 1.1 to 1.5 1.1 to 1.5 1.1 to 1.5 Frequency coefficient of rated ripple current Voltage E V H J Frequency 120Hz Coefficient 0.15 1kHz­ 10kHz 100kHz or more 0.40 0.75 1.00 Positive (φ8, φ10 )【Vibration Resistance】 Plastic (φ8, φ10 )【Vibration 】 platform SeriesResistance Voltage (H:50V) Plastic platform Trade mark Series Voltage (H:50V) Trade mark Negative φD×L 6.6 A±0.2 A±0.2 C±0.2 0.3 max. B±0.2 B±0.2 0.3 max. 0.5 max. 0.5 max. Plastic platform φD±0.5 φD±0.5 Series n2 n2 68V68V GYC GYC Voltage (V:35V) E Series E (φ6.3 )【Vibration Resistance】 Voltage (V:35V) Positive Plastic platform Vibration Resistance Lot No. Lot No. Capacitance Capacitance Positive 0.3 max. C±0.2 0.3 max. C±0.2 L ±0.5 H L ±0.5 H A±0.2 A±0.2 Capacitance L ±0.5 10 × 12.5 11.0 0.5 max. 0.5 max. L ±0.5 10 × 10 11.0 E Lot No. Capacitance 8 × 10 9.0 E Lot No. (mm) 6.3 × 5.8 6.3 × 7.7 7.3 7.3 B A E Trade mark φD×L B±0.2 B±0.2 C±0.2 Standard φD±0.5 φD±0.5 0.3 max. Positive n2 n2 68H68H GYC GYC Series B±0.2B±0.2 C±0.2 Trade mark Voltage (J:63V) 0.3 max. Plastic platform φD±0.5 φD±0.5 Series A1 A1 56J 56J GYCGYC Voltage (J:63V) 0.5 max. 0.5 max. Plastic platform (φ8, φ10 )【Standard】 A±0.2A±0.2 (φ8, φ10 )【Standard】 Negative Negative Aid electrode Aid electrode CAT.8100L CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYC Dimensions Rated Capacitance （µF） Rated Voltage （V） （code） 35 （1V） 50 （1H） 63 （1J） tan δ Leakage Current （µA） at 20℃ after 2 minutes ESR（mΩ）max. （20℃/100kHz） 13.12 50 （ ） Rated Ripple （mArms） Part Number 125℃/ 100kHz 135℃/ 100kHz 1500 950 GYC1C820MCQ1GS 82 6.3× 5.8 0.16 150 6.3× 7.7 0.16 24.0 30 2000 1500 GYC1C151MC□1GS 270 8× 10 0.16 43.2 25 3100 1700 GYC1C271MC□1GS 470 10× 10 0.16 75.2 20 3400 2100 GYC1C471MC□1GS 47 6.3× 5.8 0.14 11.75 50 1400 900 GYC1E470MCQ1GS 56 6.3× 5.8 0.14 14.00 50 1400 900 GYC1E560MCQ1GS 68 6.3× 7.7 0.14 17.00 30 1900 1400 GYC1E680MC□1GS 100 6.3× 7.7 0.14 25.00 30 1900 1400 GYC1E101MC□1GS 150 8× 10 0.14 37.50 27 2900 1600 GYC1E151MC□1GS 220 8× 10 0.14 55.00 27 2900 1600 GYC1E221MC□1GS 270 8× 10 0.14 67.50 20 3300 2000 GYC1E271MC□1GS 330 10× 10 0.14 82.50 20 3300 2000 GYC1E331MC□1GS 470 10× 12.5 0.14 117.50 16 3500 2300 GYC1E471MC□1GS 33 6.3× 5.8 0.12 11.55 60 1400 900 GYC1V330MCQ1GS 47 6.3× 5.8 0.12 16.45 60 1400 900 GYC1V470MCQ1GS 68 6.3× 7.7 0.12 23.80 35 1900 1400 GYC1V680MC□1GS 100 8× 10 0.12 35.00 27 2900 1600 GYC1V101MC□1GS 150 8× 10 0.12 52.50 27 2900 1600 GYC1V151MC□1GS 220 10× 10 0.12 77.00 20 3300 2000 GYC1V221MC□1GS 270 10× 10 0.12 94.50 20 3300 2000 GYC1V271MC□1GS 330 10× 12.5 0.12 115.50 16 3500 2300 GYC1V331MC□1GS 22 6.3× 5.8 0.10 11.00 80 1100 750 GYC1H220MCQ1GS 33 6.3× 7.7 0.10 16.50 40 1600 1100 GYC1H330MC□1GS 47 8× 10 0.10 23.50 30 2200 1250 GYC1H470MC□1GS 16 （1C） 25 （1E） Case Size φD×L（mm） 68 8× 10 0.10 34.00 30 2200 1250 GYC1H680MC□1GS 100 10× 10 0.10 50.00 28 2600 1600 GYC1H101MC□1GS 120 10× 10 0.10 60.00 28 2600 1600 GYC1H121MC□1GS 150 10× 12.5 0.10 75.00 18 3200 2000 GYC1H151MC□1GS 10 6.3× 5.8 0.08 6.30 120 1000 700 GYC1J100MCQ1GS 22 6.3× 7.7 0.08 13.86 80 1300 900 GYC1J220MC□1GS 33 8× 10 0.08 20.79 40 1900 1100 GYC1J330MC□1GS 47 8× 10 0.08 29.61 40 1900 1100 GYC1J470MC□1GS 56 10× 10 0.08 35.28 30 2300 1400 GYC1J560MC□1GS 68 10× 10 0.08 42.84 30 2300 1400 GYC1J680MC□1GS 82 10× 10 0.08 51.66 30 2300 1400 GYC1J820MC□1GS 100 10× 12.5 0.08 63.00 20 3000 1900 GYC1J101MC□1GS □ : Enter the appropriate configuration code. Blue : New product（as of October 2022） For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L