GYD1V101MCQ1GS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS GYD NEW Chip Type, 150°C High Reliability High Reliability, Low ESR,High ripple current. Long life of 1000 hours at 150°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. GYD GYC High Temperature Specifications Item Performance Characteristics Category Temperature Range – 55 to +150°C Rated Voltage Range 25 to 35V Rated Capacitance Range 100 to 270µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) 25 0.14 Rated voltage (V) tan δ (MAX.) 35 0.12 120Hz 20°C Less than or equal to the specified value at 100kHz, 20°C ESR Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Temperature Characteristics (Max.Impedance Ratio) Z– 25°C / Z+20°C Z– 55°C / Z+20°C Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 1000 hours at 150°C, the peak voltage shall not exceed the rated voltage. 2 2.5　(100kHz) Within ± 30% of initial capacitance value 200% or less of the initial specified value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ ESR Leakage current After storing the capacitors under no load at 150°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C, 85% RH. Damp Heat (Steady State) The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Resistance to Soldering Heat Capacitance change tan δ Leakage current Within±30% of the initial capacitance value 200% or less of the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Within±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value Black print on the case top. Marking Dimensions (φ8, φ10 ) 0.3 MAX. Trade mark 1 0.5 MAX. Plastic platform Series Voltage (V:35V) Type numbering system (Example : 35V 100µF) Positive C±0.2 2 3 4 5 6 7 8 9 10 11 12 13 14 GYD 1 V 1 0 1 MCQ 1 GS Taping code A±0.2 E B±0.2 φD±0.5 A1 100V GYD Size code Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) Lot No. L ±0.5 Capacitance H Rated voltage (35V) Negative Series name Type Dimensions (mm) φD×L V Cap.(µF) 100 Co 25 de 1V 101 150 151 220 221 270 271 8 × 10 8 × 10 10 × 10 27 20 φ10 × 10 V 25 35 A 9.0 11.0 Code E V B 8.3 10.3 C 8.3 10.3 E 3.1 4.5 L 10.3 10.3 35 1E 27 1400 1400 10 × 10 20 1800 1800 Case size φD × L (mm) ESR mΩ Ripple mArms Voltage φ8 × 10 H 0.8 to 1.1 0.8 to 1.1 The vibration structure-resistant product is also available upon request, please ask for details. ESR at 20°C 100kHz Rated ripple Current at 150°C 100kHz Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 120Hz 0.15 1kHz­ 0.40 10kHz 100kHz or more 0.75 1.00 Apr.2020