JJC0E336MELC

ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JJC Snap-in Terminal Type Excellent in voltage holding property. Suitable for quick charge and discharge. Wide temperature range (– 25°C to + 60°C). Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Performance Characteristics Item Category Temperature Range – 25 to +60°C Rated Voltage Range 2.5V Rated Capacitance Range 56 to 200F See Note Capacitance Tolerance ± 20% (20°C) Stability at Low Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 ESR, DCR* Refer to the table below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Capacitance change Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 500 hours at 40°C 90%RH. Capacitance change Humidity Endurance Marking Printed with white color letter on black sleeve. 70% Drawing ESR (– 25°C) / ESR (+20°C) 　7 Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Type numbering system (Example : 2.5V 150F) Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 φD +1MAX. J J C 0 E 1 5 7 M E L C 4.0±0.5 L±2 Case dia. code (10 ) Pressure relief vent .2 +0 .1 .8 -0 φD Code Capacitance tolerance (±20%) 25 30 35 A B C Rated capacitance (150F) 0 Rated voltage (2.5V) Series name Type (2.5) 4.0 ±0.5 0.8 +0.2 -0.1 Configuration 1.5 +0.2 -0.1 (Terminal dimensions) Dimensions Rated Voltage ( code ) 2.5V (0E) Cap. (F) Cap. code ESR(mΩ) (at 1kHz ) DCR Typical (mΩ) Case size φ D × L (mm) φ 25 (A) φ 30 (B) φ 35 (C) 25 × 40 30 × 30 25 × 50 30 × 40 56 566 70 50 68 686 60 45 82 826 60 35 100 107 50 30 120 127 50 25 150 157 40 22 35 × 50 200 207 30 16 35 × 50 35 × 30 35 × 35 30 × 50 35 × 40 Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT The listed DCR value is typical and therefore not a guaranteed value. CAT.8100K