JJD0E238MSEFBN

ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JJD Screw Terminal Type, High Energy Density Type High energy density. Suitable for electric power storage. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Performance Characteristics Item Category Temperature Range – 25 to +60°C Rated Voltage Range 2.5V Rated Capacitance Range 1000 to 2500F See Note Capacitance Tolerance ± 20% , 20°C Stability at Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 DCR* Refer to the table below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Capacitance change Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 500 hours at 40°C 90%RH. Capacitance change Humidity Endurance Marking Printed with white color letter on black sleeve. Drawing 70% DCR (– 25°C) / DCR(+20°C) DCR DCR DCR 7 Within ±30% of the initial capacitance value 300% or less than the initial specified value Within ±30% of the initial capacitance value 300% or less than the initial specified value Within ±30% of the initial capacitance value 300% or less than the initial specified value Type numbering system (Example : 2.5V 1000F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 J J D 0 E 1 0 8 M S E D Mounting bracket Case dia. code(φ40) (φ40) Configuration φD Code Code less 2-leg brackets (±20%) Capacitance tolerance BN No brackets D 40 Rated capacitance (1000F) F (φ51) 51 Rated voltage (2.5V) Series name Type Configuration Code less 3-leg brackets BB 2-leg brackets No bracket BN Cr ( III) Plating (RoHS compliant) SE Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) W 18.8 26.0 φD 40 51 R 9 10 α 3 3 Nominal of bolt M6 M6 Leg shape Cap. (F) Cap. code DCR Typical (mΩ) Case size L (mm) 105 8.0 1000 108 40 2.5V 135 6.0 1300 138 (0E) 135 4.0 2300 238 51 142 3.5 2500 258 The listed DCR value is typical and therefore not a guaranteed value. φ (mm) φD Symbol Dimensions Rated Voltage ( Code ) Dimensions of mounting bracket Ref. Weight (g) 210 250 450 500 P A B T S U θ° H h 3-Legs 51 32.5 38.5 – 7.5 5.0 12 60 20 15 (mm) 2-Legs 40 27 32 48 7.0 3.5 10 45 17 12 51 33.2 40 – 6.0 4.5 14 30 25 15 Note)The brackets will be supplied in the separate box. CAT.8100K