JJL0E857MSED

ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JJL Screw Terminal Type, High Power Density Type High power density. Rapid charge-discharge. Suitable for regeneration and UPS applications. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Performance Characteristics Item Category Temperature Range – 25 to +60°C Rated Voltage Range 2.5V Rated Capacitance Range 700 to 2000F See Note Capacitance Tolerance ± 20%(20°C) Stability at Low Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 DCR* Refer to the table below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Capacitance change Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 500 hours at 40°C 90%RH. Capacitance change Humidity Endurance Marking Printed with white color letter on black sleeve. 70% Drawing φ 40 DCR DCR DCR Within ±30% of the initial capacitance value 300% or less than the initial specified value Within ±30% of the initial capacitance value 300% or less than the initial specified value Within ±30% of the initial capacitance value 300% or less than the initial specified value Type numbering system (Example : 2.5V 700F) 1 4 5 6 7 8 9 10 11 12 13 14 T P Configuration (φ40) Code less 2-leg brackets BN No brackets (φ51) Code less 3-leg brackets BB 2-leg brackets No bracket BN Cr (III) Plating (RoHS compliant) A ±1 ±1 Mounting bracket Case dia. code(φ40) Configuration φD Code Capacitance tolerance (±20%) D 40 Rated capacitance (700F) F 51 Rated voltage (2.5V) Series name Type S U B±1 θ° W±1 φ D+2MAX. + h H±0.5 MAX. 3 Pressure relief vent M6(φ40) Sleeve 2 J J L 0 E 7 0 7 M S E D Hexagenal headed bolt Bottom plate L+ DCR (– 25°C) / DCR (+20°C) 　7 SE φ 51 Hexagenal headed bolt Sleeve 0° 12 Pressure relief vent Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT S h ±1 MAX. T P±2 A ±2 H ±1 L+ U S P A ±2 D +2MAX. W±1 M6 T Bottom plate U Pressure relief vent 30° Dimensions of terminal pitch(W) and length(R) and Normal dia. of bolt (mm) W 18.8 26.0 φD 40 51 R 9 10 α 3 3 Nominal of bolt M6 M6 Cap. (F) Cap. code DCR Typical (mΩ) Case size φ D × L (mm) φ D L 105 700 707 3.5 40 142 1000 108 2.5 167 1200 128 2.2 105 1100 118 2.8 142 1700 178 1.7 51 167 2000 208 1.5 The listed DCR value is typical and therefore not a guaranteed value. 2.5V (0E) Leg shape φD Symbol Dimensions Rated Voltage ( Code ) Dimensions of mounting bracket Ref. Weight (g) 210 250 300 380 500 600 P A B T S U θ° H h 3-Legs 51 32.5 38.5 – 7.5 5.0 12 60 20 15 (mm) 2-Legs 40 27 32 48 7.0 3.5 10 45 17 12 51 33.2 40 – 6.0 4.5 14 30 25 15 Note)The brackets will be supplied in the separate box. CAT.8100K