JUK0E685MHD

ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JUK Radial Lead Type, Lower Resistance Lower resistance type of JUM. Suited for Smart Meters. Lower temperature range (– 40 to +70°C). Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). JUM Lower resistance JUK Specifications Performance Characteristics Item Category Temperature Range – 40 to +70°C Rated Voltage 2.5V Rated Capacitance 6.8 to 27F See Note Capacitance Tolerance ± 20% , 20°C Stability at Low Temperature Capacitance (– 40°C) / Capacitance (+20°C) ×100 ESR, DCR* Refer to the table below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 70°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 1000 hours at 70°C. Capacitance change Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 500 hours at 40°C 90%RH. Capacitance change Humidity Endurance Marking Printed with white color letter on black sleeve. Drawing 70% ESR (– 40°C) / ESR (+20°C) 　7 Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Type numbering system (Example : 2.5V 6.8F) (P.E.T. (P.E.T. ) ) Sleeve Sleeve 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 910 1011 11 J JUUKK0 0EE6 68 85 5MMHHDD Pressure Pressure relief relief ventvent 1 2 3 4 5 6 7 8 9 10 11 J UK 0 E 6 8 5 MHD MAX. MAX. L+2.0 L+2.0 Pressure relief vent 15MIN 15MIN 4MIN 4MIN (mm) (mm) MAX. L+2.0 16 12.5 16 1818 15MIN 12.5 P P 5.05.0 7.57.5 7.57.5 Configuration Configuration 4MIN Pb-free lead finishing Pb-free lead finishing Pb-free PET sleeve Pb-free PET sleeve 12.5 to 18 12.5 to 18 Configuration (mm) 0.8 0.80.8 0.80.8 0.8 12.5 16 18 P 5.0 7.5 7.5 Please refer to the Guidelines for Aluminum Electrolytic Capacitors 0.8 seal 0.8configuration 0.8 for end information. Rated Rated Rated Voltage Rated Voltage Capacitance Capacitance ( Code ( Code ) ) (F) (F) Dimensions Rated Voltage 2.5V 2.5V ( Code ) (0E) (0E) 6.86.8 Rated Capacitance 1212 (F)18 18 2.5V (0E) 6.8 27 27 12 18 27 Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (6.8 Rated capacitance (6.8 F) F) Configuration Rated voltage (2.5V) Rated voltage (2.5V) Capacitance tolerance (±20%) Series name Series name Rated capacitance (6.8 F) Type Type Rated voltage (2.5V) P±0.5 P±0.5 P±0.5 Sleeve (P.E.T. ) HDHD Series name Type Pb-free lead finishing Pb-free PET sleeve 12.5 to 18 HD Code Code 685 685 126 126 Code 186 186 685 276 276 126 186 276 0.075 0.075 0.060 0.060 0.055 0.055 0.075 0.040 0.040 0.060 0.055 0.040 0.085 0.085 0.065 0.065 0.055 0.055 0.085 0.035 0.035 0.065 0.055 0.035 Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT The listed DCR value is typical and therefore not a guaranteed value. CAT.8100K