JUMT1106MHD

ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JUM Radial Lead Type, Standard Standard type (2.7V). Suitable for quick charge and discharge. Wide temperature range (– 25 to +70°C). Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). JUM JUA Lower resistance Long Life Higher Capacitance JUW Specifications Performance Characteristics Item Category Temperature Range – 25 to +70°C Rated Voltage Range 2.7V Rated Capacitance Range 1 to 47F See Note Capacitance Tolerance ± 20% , 20°C Stability at Low Temperature Capacitance (– 25°C) / Capacitance (+20°C) ×100 ESR, DCR* Refer to the table below (20°C). *DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 70°C. Capacitance change Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 1000 hours at 70°C. Capacitance change Shelf Life The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 500 hours at 40°C 90%RH. Capacitance change Humidity Endurance Marking Printed with white color letter on black sleeve. 70% ESR (– 25°C) / ESR (+20°C) 　4 Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Within ±30% of the initial capacitance value 300% or less than the initial specified value ESR Drawing Type numbering system (Example : 2.7V 10F) (P.E.T. (P.E.T. ) ) Sleeve Sleeve φd φd 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 910101111 Sleeve (P.E.T.) φd P±0.5 P±0.5 φD+0.5MAX φD+0.5MAX J JUUMMTT1 1 1 10 06 6MMHHDD 1 2 3 4 5 6 7 8 9 10 11 J UM T 1 1 0 6 MHD Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) φD+0.5MAX Rated capacitance Rated capacitance (10(10 F)F) MAX. MAX. L+ L+ Pressure relief vent 8 8 φD φD MINMIN 1515 Rated voltage (2.7V) Rated voltage (2.7V) Configuration P0.5 Pressure Pressure relief relief vent vent 4MIN 4MIN Series name Series name Capacitance tolerance (20%) Type Type Rated capacitance (10 F) (mm) (mm) L+ 1010 12.5 12.5 1616 1818 MAX. 15MIN 4MIN 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 P P 3.5 0.6 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 φdφd 0.6 Configuration Configuration (φD (φD 25 for the φ12.5 dia unit, lead dia φ d=0.8 Rated Rated Rated Rated Voltage Voltage Capacitance Capacitance ( Code ( Code ) ) (F)(F) Dimensions Rated Voltage ( Code ) 2.7V 2.7V (T1) (T1) 2.7V (T1) 0.47 0.47 Rated 1.0 1.0 Capacitance 2.2 2.2 (F) 3.3 3.3 1 4.7 4.7 2.2 1010 3.3 2222 4.7 3333 10 4747 22 33 47 Code Code ESR ESR DCR DCR (Ω) (Ω) Typical (Ω) (Ω) (at(at 1kHz) 1kHz) Typical 474 474 105 105 Code 225 225 335 335 105 475 475 225 106 106 335 226 226 475 336 336 106 476 476 226 336 476 44 ESR 22 (Ω) 22 (at 1kHz) 11 1.8 0.4 0.4 1.0 0.2 0.2 0.6 0.2 0.2 0.4 0.1 0.1 0.2 0.1 0.1 0.07 0.06 0.05 66 33 DCR 1.3 1.3(Ω) Typical 1.0 1.0 3 0.6 0.6 1.3 0.25 0.25 1.0 0.13 0.13 0.6 0.08 0.08 0.25 0.06 0.06 0.13 0.08 0.06 Pb-free Pb-free lead lead finishing finishing Pb-free Pb-free PET PET sleeve sleeve 8 81010 PDPD 12.5 12.5 to to 1818 Configuration (mm) In In case case L>25 L>25 forfor thethe φ12.5 φ12.5 diadia unit, unit, lead lead diadiaφ d=0.8 φ d=0.8 Case Case size size φD φD ¥L ¥L (mm) (mm) 6.3 6.3 ¥9 ¥9 8 8 ¥ 11.5 ¥ 11.5 Case size 88 ¥L 20 ¥(mm) 20 φD× 1010 ¥ 20 ¥ 20 8 × 11.5 12.5 12.5 ¥ 20 ¥ 20 8 × 20 12.5 12.5 ¥ 31.5 ¥ 31.5 10 × 20 1616 ¥ 31.5 ¥ 31.5 12.5 × 20 1818 ¥ 31.5 ¥ 31.5 × 12.5 31.5 1818 ¥ 40 ¥ 40 16 × 31.5 18 × 31.5 18 × 40 Rated voltage (2.7V) φD φD Series name Type HDHD φD Pb-free lead finishing Pb-free PET sleeve 6.3 ED 8 10 PD 12.5 to 18 HD Note : The capacitance calculated from discharge time (ΔT) with constant current ( i ) after 30minuite charge with rated voltage (2.7V). The discharge current ( i ) is 0.01 × rated capacitance (F). The discharge time (ΔT) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ΔT The listed DCR value is typical and therefore not a guaranteed value. CAT.8100K