LAD2E122MELC

ALUMINUM ELECTROLYTIC CAPACITORS AD Snap-in Terminal Type, Withstanding Overvoltage series series Withstanding 3000 hours application of rated ripple current at 105°C. Suited for 100V/200V switch-over use in switching power supplies. Withstanding overvoltage and suited for IEC-60950 application. Adapted to the RoHS directive (2002/95/EC). AD Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Stability at Low Temperature Withstandard overvoltage GU a Performance Characteristics – 40 ~ +105°C 250V 82 ~ 1200µF ± 20% at 120Hz, 20°C I 3 CV ( µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 0.15MAX. 120Hz,20°C Rated voltage(V) Z – 25°C/Z+20°C Impedance ratio ZT/Z20 (MAX.) Z – 40°C/Z+20°C 250 3 12 Measurement frequency:120Hz Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current)for 3000 hours at 105°C, capacitors meet the characteristic requirements listed at right. After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Capacitance change tan δ Leakage current Within ±20% of intial value 200% or less of intial spesified value Initial specified value or less Within ±15% of intial value 150% or less of intial spesified value Initial specified value or less Shelf Life Withstand excess voltage Marking Not defective after 7 hours continuous charges of 360VDC at 70°C atmosphere. Printed with white color letter on black sleeve. Drawing Type numbering system (Example : 250V 560 µF) Polarity bar Sleeve (P.E.T.) D +1MAX. 2- B 2.0 ±0.1 10 0.8+0.2 -0.1 +0 0.8 -0.1 .2 LAD 2E 5 6 1 MEL A Configuration Capacitance tolerance (±20%) Rated Capacitance (560µF) Rated voltage (250V) Series name Type 1 2 3 4 5 6 7 8 9 10 11 12 L±2 Pressure relief vent 10±0.1 4.0±0.5 2.5 B 4.0±0.5 1.5 +0.2 -0.1 (PC board hole dimensions) (Terminal dimensions) Case dia. code D Code 20 Y 22 Z 25 A 30 B 35 C Dimensions V(Code) Cap.(µF) B The other terminal is also available upon request. Please refer page 237 for schematic of dimensions. Code φD 0082 0100 0120 0150 0180 0220 0270 0330 0390 0470 0560 0680 0820 1000 1200 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 20 20 × 20 20 × 25 20 × 25 20 × 30 20 × 35 20 × 40 20 × 45 20 × 50 22 0.42 0.53 0.65 0.79 0.90 1.00 1.15 1.30 22 × 20 22 × 25 22 × 25 22 × 25 22 × 30 22 × 35 22 × 40 22 × 45 0.53 0.65 0.79 0.90 1.00 1.15 1.30 1.49 250V (2E) 25 30 35 25 × 20 25 × 25 25 × 25 25 × 25 25 × 30 25 × 35 25 × 40 25 × 45 25 × 50 0.65 0.79 0.90 1.00 1.15 1.30 1.49 1.65 1.80 30 × 20 30 × 25 30 × 25 30 × 25 30 × 30 30 × 35 30 × 40 30 × 45 30 × 50 0.90 1.00 1.15 1.30 1.49 1.65 1.80 2.00 2.30 Frequency coefficient of rated ripple current Frequency (Hz) Coefficient 35 × 20 35 × 25 35 × 25 35 × 25 35 × 30 35 × 35 35 × 40 35 × 45 35 × 50 Case size φ D × L (mm) 1.15 1.30 1.49 1.65 1.80 2.00 2.30 2.47 2.60 Rated ripple 50 0.81 60 0.85 120 1.00 300 1.17 1k 1.32 10k 1.45 50k~ 1.50 Rated Ripple (Arms) at 105°C 120Hz Minimum order quantity : 50pcs. CAT.8100V