LAQ2G122MEL

ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature Range (692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than AK series. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Smaller AQ Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Stability at Low Temperature –25 ~ +105°C Performance Characteristics 200 • 220 • 400V 33 ~ 1500µF ± 20% at 120Hz, 20°C I 3 CV ( µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C 200 • 220 8 Capacitance change tan δ Leakage current 0.20MAX. 120Hz, 20°C 400 8 Measurement frequency : 120Hz Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Within ±15% of initial value 150% or less of initial specified value Initial specified value or less Capacitance change tan δ Leakage current Shelf Life Safety Performance The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Rating Test conditions Limited DC current Test voltage Voltage (V) Rated Capacitance (µF) 4A 330 C < 330 5A 300VDC and 375VDC 200 330 C < 470 7A 470 C < 470 330 C < 330 4A 330 C < 470 220 5A 320VDC and 405VDC 470 C < 470 7A 330 C < 100 2A 400 100 C < 220 4A 500VDC and 600VDC 220 C < 470 7A Printed with white color letter on black sleeve Marking Drawing Type numbering system (Example : 200V 680µF) Bottom plate (code ZB only) D +1MAX. Polarity bar Sleeve (P.E.T.) L AQ 2D 6 8 1 ME L A 4 0 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Case length code ZB Case dia. code code less fD Code 22 Z 25 A 30 B 35 C Bottom Plate With Bottom Plate Without Bottom Plate f L±2 Pressure relief vent 4.0±0.5 0.8 +0.2 -0.1 4.0 ± 0.5 2.5 +0 0.8 -0.1 .2 10±0.1 Configuration Capacitance tolerance (±20%) Rated Capacitance (680µF) Rated voltage (200V) Series name Type Please contact to us if other configurations are required. 1.5 +0.2 -0.1 (Terminal dimensions) 2-2 f ±0.1 (PC board hole dimensions) Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS AQ Cap.(µF) series Dimensions V(Code) Cod e φD 22 200V (2D) 25 30 35 22 220V (2P) 25 30 35 0033 0039 0047 0056 0068 0082 0100 0120 0150 0180 0220 0270 0330 0390 0470 0560 0680 0820 1000 1200 1500 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 22 × 25 0.70 22 × 25 0.90 22 × 25 1.00 22 × 30 1.20 22 × 35 1.35 22 × 40 1.45 22 × 45 1.60 22 × 50 1.75 25 × 20 0.70 22 × 20 0.50 22 × 25 0.60 22 × 25 0.65 22 × 25 0.70 22 × 30 0.90 22 × 35 1.00 22 × 40 1.20 22 × 45 1.35 30 × 25 1.45 30 × 30 1.60 30 × 30 1.75 30 × 35 2.11 30 × 45 2.40 30 × 50 2.65 25 × 25 1.20 25 × 30 1.35 25 × 30 1.45 25 × 35 1.60 25 × 40 1.75 25 × 50 2.11 25 × 20 0.65 25 × 25 0.70 25 × 25 0.90 25 × 30 1.00 25 × 30 1.20 25 × 35 1.35 25 × 40 1.45 25 × 45 1.60 22 22 × 25 0.25 22 × 25 0.30 22 × 25 0.35 22 × 25 0.45 22 × 25 0.51 22 × 30 0.58 22 × 30 0.66 22 × 35 0.76 22 × 40 0.85 400V (2G) 25 30 35 35 × 25 1.75 35 × 30 2.11 35 × 35 2.40 35 × 40 2.65 35 × 45 3.08 30 × 20 0.90 30 × 25 1.00 30 × 25 1.20 30 × 30 1.35 30 × 30 1.45 30 × 35 1.60 30 × 40 1.75 30 × 45 2.11 25 × 25 0.58 25 × 25 0.66 25 × 30 0.76 25 × 35 0.85 25 × 40 0.95 25 × 45 1.24 35 × 20 1.00 35 × 25 1.20 35 × 25 1.35 35 × 25 1.45 35 × 30 1.60 35 × 35 1.75 35 × 40 2.11 35 × 45 2.40 30 × 25 0.76 30 × 25 0.85 30 × 30 0.95 30 × 35 1.24 30 × 40 1.30 30 × 45 1.47 35 × 25 0.95 35 × 30 1.24 35 × 35 1.30 35 × 35 1.47 35 × 40 1.59 35 × 45 1.87 Case size φ D × L (mm) Rated ripple Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 200 •220V Coefficient 400V 50 0.85 0.88 60 0.88 0.90 120 1.00 1.00 1k 1.15 1.10 10k~ 1.20 1.15 CAT.8100V