LAQ2G471MELC45

ALUMINUM ELECTROLYTIC CAPACITORS LAQ Snap-in Terminal Type,  105°C Permissible Abnormal Voltage, Smaller-sized Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than LAK. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). LAK Smaller LAQ Specifications Performance Characteristics Item Category Temperature Range –25 to +105°C Rated Voltage Range 200 • 220 • 400V Rated Capacitance Range 33 to3 1500µF CV Capacitance Tolerance ± 20% 120Hz,  20°C 3 at CV Leakage Current I Tangent of loss angle (tan δ) 0.20max. 120Hz at 20°C Stability at Low Temperature Rated voltage (V) Impedance ratio (max.) Z(– 25°C) / Z(+20°C) The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change Endurance After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change Shelf Life Safety Performance The pressure relief vent will operate in normal conditions,  with no dangerous conditions such as flames,  ignitions or dispersion of pieces of the capacitor and / or case. Test conditions Rating Voltage (V) Rated Capacitance (µF) Limited DC current Test voltage 4A 330       C