LDM2D122MERA

ALUMINUM ELECTROLYTIC CAPACITORS DM Horizontal Mounting Type series For φ20, φ22 and φ25, but suited for horizontal mounting toassure flat and low-profile design. Adapted to the RoHS directive (2002/95/EC). DQ High Temperature DM Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 40 ~ + 85°C (200V), – 25 ~ + 85°C (400V) 200 • 400V 82 ~ 1200µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) Rated voltage (V) Z – 25°C/ Z+20°C Impedance ratio Z – 40°C/ Z+20°C ZT/Z20(MAX.) 200 0.15 200 3 12 400 0.15 Measurement frequency : 120Hz Stability at Low Temperature 400 8 — Capacitance change tan δ Leakage current Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Within ±15% of initial value 150% or less of initial specified value Initial specified value or less Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 85°C, c apacitors meet the characteristic requirements listed at right. After storing the capacitors under no load at 85° C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20° C, they will meet the characteristic requirements at right. Printed with white color letter on black sleeve. Shelf Life Marking Drawing L±2 Sleeve (P.E.T.) 3.5±1 Type numbering system (Example : 200V 470 µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Lead wire configuration GA: Left side from the front HA: Right side from the front L DM 2 D 4 7 1 M E R Z GA ( ) Case dia. code +1MAX. Configuration Capacitance tolerance (±20%) Pressure relief vent 0.6 Rated Capacitance (470µF) 8.0±2 2.0 P±1 φ20 : P=7.5 φ22, φ25 : P=8.5 Rated voltage (200V) Series name Type φD 20 22 25 Code Y Z A φD Dimensions V(Code) Cap.(µF) Co de φD 20 200V (2D) 22 25 0082 0100 0120 0150 0180 0220 0270 0330 0390 0470 0560 0680 0820 1000 1200 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 20 20 × 30 20 × 30 20 × 35 20 × 40 20 × 50 400V (2G) 22 25 0.78 0.90 1.02 1.17 1.30 20 × 30 20 × 30 20 × 35 20 × 40 20 × 45 20 × 50 1.32 1.49 1.66 1.93 2.00 2.30 22 × 35 22 × 40 22 × 45 22 × 60 1.20 1.38 1.55 1.70 25 × 35 25 × 40 25 × 45 25 × 50 25 × 60 1.25 1.56 1.70 1.90 2.15 22 × 35 22 × 40 22 × 45 22 × 50 22 × 60 1.88 1.96 2.43 2.80 3.00 25 × 35 25 × 40 25 × 45 25 × 60 2.68 2.80 3.12 3.44 Case size φ D × L (mm) ( mm) Rated ripple Other ratings also available on request. Rated Ripple (Arms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 200V Coeff. 400V 50 0.81 0.77 60 0.85 0.82 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k~ 1.50 1.43 Minimum order quantity : 50pcs. CAT.8100V