LDM2D561MERZGA

ALUMINUM ELECTROLYTIC CAPACITORS DM 85°C Horizontal Mounting Type series For φ20, φ22 and φ25, but suited for horizontal mounting toassure flat and low-profile design. Adapted to the RoHS directive (2002/95/EC). DQ High Temperature Products which are scheduled to be discontinued. Not recommended for new designs DM Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current – 40 to + 85°C (200V), – 25 to + 85°C (400V) 200 • 400V 82 to 1200µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) 200 0.15 Rated voltage (V) tan δ (MAX.) 400 0.15 Measurement frequency : 120Hz 200 3 12 Rated voltage (V) Z – 25°C/ Z+20°C Impedance ratio Z – 40°C/ Z+20°C ZT/Z20(MAX.) Stability at Low Temperature 400 8 — Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 85°C, the peak voltage shall not exceed the rated voltage. Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the characteristic requirements at right. Capacitance change tan δ Leakage current Within ±15% of initial value 150% or less of initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on black sleeve. Type numbering system (Example : 200V 470 µF) Drawing 1 L±2 3.5±1 2 3 4 5 6 7 8 9 10 11 12 13 14 L DM 2 D 4 7 1 M E R Z GA Lead wire configuration GA: Left side from the front HA: Right side from the front ( Sleeve (P.E.T.) ) φD +1MAX. Case dia. code 0.6 Configuration φD Code Capacitance tolerance (±20%) 20 Y Rated Capacitance (470µF) 8.0±2 2.0 Pressure relief vent 22 Z 25 A Rated voltage (200V) Series name P±1 Type φ20 : P=7.5 φ22, φ25 : P=8.5 Dimensions V(Code) Cap.(µF) 0082 0100 0120 0150 0180 0220 0270 0330 0390 0470 0560 0680 0820 1000 1200 φD Co de 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 200V (2D) 22 20 25 20 × 30 20 × 30 20 × 35 20 × 40 20 × 50 20 × 30 20 × 30 20 × 35 20 × 40 20 × 45 20 × 50 1.32 1.49 1.66 1.93 2.00 2.30 22 × 35 22 × 40 22 × 45 22 × 50 22 × 60 1.88 1.96 2.43 2.80 3.00 25 × 35 25 × 40 25 × 45 25 × 60 400V (2G) 22 20 2.68 2.80 3.12 3.44 Other ratings also available on request. 0.78 0.90 1.02 1.17 1.30 22 × 35 22 × 40 22 × 45 22 × 60 1.20 1.38 1.55 1.70 25 25 × 35 25 × 40 25 × 45 25 × 50 25 × 60 1.25 1.56 1.70 1.90 2.15 Case size φ D × L (mm) Rated ripple Rated Ripple (Arms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 50 200V 0.81 Coeff. 400V 0.77 Minimum order quantity : 50pcs. 60 0.85 0.82 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k or more 1.50 1.43 CAT.8100X