LDQ2D122MERY

ALUMINUM ELECTROLYTIC CAPACITORS DQ Item Horizontal Mounting Type, Wide Temperature Range series Horizontal mounting version for φ20 ,φ22 and φ25. Suited for use in flat electronic devices where height space is limited. Adapted to the RoHS directive (2002/95/EC). DQ High Temperature Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ DM Performance Characteristics – 40 ~ +105°C (200V) , – 25~+105°C (400V) 200 • 400V 68 ~ 1200µF ± 20% at 120Hz, 20°C I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 200 0.15 200 3 12 400 0.15 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z – 25°C/ Z+20°C Impedance ratio Z – 40°C/ Z+20°C ZT/Z20(MAX.) 400 8 — Capacitance change tan δ Leakage current Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Within ±15% of initial value 150% or less of initial specified value Initial specified value or less Endurance After an application of DC voltage(in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Shelf Life Marking Printed with white color letter on black sleeve. Drawing L±2 Sleeve (P.E.T.) 3.5±1 Type numbering system (Example : 200V 470µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Lead wire configurationt GA : Left side from the front L DQ 2 D 4 7 1 M ER Z GA ( HA : Right side from the front ) +1MAX. Case dia.code Configuration Pressure relief vent 0.6 8.0±2 Capacitance tolerance(±20%) 2.0 P±1 φ20 : P=7.5 φ22, φ25 : P=8.5 Rated Capacitance(470µF) Rated voltage(200V) Series name Type φD 20 22 25 Code Y Z A Dimensions V(Code) Cap.(µF) Co de φD φD 20 200V (2D) 22 25 20 × 30 20 × 30 20 × 35 20 × 40 20 × 45 20 × 50 20 0.56 0.64 0.70 0.75 0.83 0.95 400V (2G) 22 25 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 20 × 30 20 × 35 20 × 40 20 × 45 20 × 50 1.10 1.20 1.31 1.45 1.58 22 × 35 22 × 40 22 × 45 22 × 50 22 × 60 0.75 0.88 0.95 1.10 1.22 25 × 35 25 × 40 25 × 45 25 × 50 0.95 1.10 1.22 1.44 22 × 35 22 × 40 22 × 45 22 × 60 1.45 1.60 1.78 2.04 25 × 35 25 × 40 25 × 45 25 × 50 25 × 60 1.60 1.78 2.04 2.30 2.65 Case size φ D × L (mm) Rated ripple Other rating also available on request. Rated Ripple (Arms) at 105°C, 120Hz Frequency coefficient of rated ripple current Frequency (Hz) Coeff. 200V 400V 50 0.81 0.77 60 0.85 0.82 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k~ 1.50 1.43 Minimum order quantity : 50pcs. CAT.8100V