LGM2W561MELB45

ALUMINUM ELECTROLYTIC CAPACITORS LGM TENTATIVE Snap-in Terminal Type, 105°C Ultra-Smaller-Sized One rank smaller case sized than LGL. Suited for equipment down sizing. Compliant to the RoHS directive (2011/65/EU). LGL Smaller LGM Specifications Item Performance Characteristics Category Temperature Range – 25 to +105°C Rated Voltage Range 450V Rated Capacitance Range 180 to 820µF Capacitance Tolerance ± 20% at 120Hz,  20°C Leakage Current After 5 minutes’ application of rated voltage, leakage current is not more than 3 CV(µA) or 5 mA, whichever is smaller (at 20°C) . Tangent of loss angle (tan δ) 0.20MAX. 120Hz at 20°C 3 CV 3 CV Rated voltage (V) Stability at Low Temperature Endurance Shelf Life Marking 450 Z – 25°C / Z+20°C 8 Impedance ratio ZT/Z20(MAX.) The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Capacitance change After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. tan δ Within ± 20% of the initial capacitance value 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value tan δ 200% or less than the initial specified value Less than or equal to the initial specified value Leakage current Printed with white color letter on black sleeve. Drawing Type numbering system (Example : 450V 180µF) Polaritybar bar Polarity (P.E.T. )) Sleeve(P.E.T. Sleeve 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10101111 1212 13131414 LLGGMM 22WM 11 88 11 MMEELL AA 2255 φ D +1.5 MAX. φD +1.5 MAX. Caselength lengthcode code Case Casedia. dia.code code Case Configuration Configuration 4.0±0.5 L L2 ±2.5 Capacitancetolerance tolerance(±20%) (±20%) Capacitance （ 1010） Ratedcapacitance capacitance(180µF) (180µF) Rated Ratedvoltage voltage(450V) (450V) Rated 4.0 0.5 Pressurerelief reliefvent vent Pressure Seriesname name Series Type Type .2 0.8 +0.2 +0 1 -0.1 0.8 +0.2 0.2 -0.1 + .1 .8 -0. 0 0 0.8 - 1010± 0 4.0 0.5 4.0±0.5 2.5 （2.5） .1 0.1 2-2φ ±0.10.1 2-2φ 1.5 +0.2 -0.1 1.5 +0.2 -0.1 (Terminaldimensions) dimensions) (Terminal (PCboard boardhole holedimensions) dimensions) (PC Theother otherterminal terminalisisalso alsoavailable availableupon uponrequest. request. The Please refer page 263 for schematic of dimensions. Frequency coefficient of rated ripple current Frequency (Hz) Coefficient 50 0.77 Minimum order quantity : 50pcs.   Dimension table in next page. 60 0.82 120 1.00 300 1.16 1 k 1.30 10k 1.41 50k or more 1.43 φD φD 2222 2525 3030 3535 Code Code ZZ AA BB CC ALUMINUM ELECTROLYTIC CAPACITORS LGM Dimensions 450V (2W) Cap. (µF) 180 220 270 330 390 470 560 680 820 Size φD × L(mm) Rated ripple Leakage Current (mA) (mArms) Code 22 470 0.90 LGM2W181MELZ30 25 470 0.90 LGM2W181MELA25 550 0.99 LGM2W221MELZ35 550 0.99 LGM2W221MELA30 × 30 × 25 22 × 35 25 × 30 25 × 35 30 × 25 25 × 40 30 × 30 25 × 45 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 35 × 40 35 × 45 650 1.10 LGM2W271MELA35 650 1.10 LGM2W271MELB25 750 1.22 LGM2W331MELA40 730 1.22 LGM2W331MELB30 900 1.32 LGM2W391MELA45 900 1.32 LGM2W391MELB35 1000 1.45 LGM2W471MELB40 1000 1.45 LGM2W471MELC30 1200 1.59 LGM2W561MELB45 1200 1.59 LGM2W561MELC35 1400 1.75 LGM2W681MELC40 1600 1.92 LGM2W821MELC45 Rated ripple current (mArms) at 105°C 120Hz