LNT1K223MSM

ALUMINUM ELECTROLYTIC CAPACITORS NT Screw Terminal Type, 105°C Standard series Load life of 5,000 hours (2,000 hours for 10~250V,500V) application of rated ripple current at +105°C. Extended voltage range from 10V up to 500V. Extended range up to φ100 × 250L 2size. Available for adapted to the RoHS directive (2002/95/EC). NT High Temperature NR Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C (10 to 100V) , – 25 to +105°C (160 to 500V) Rated Voltage Range 10 to 500V Rated Capacitance Range 220 to 1500000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 5 minutes’ application of rated voltage, leakage current is not more than 3 CV (µA) or 5mA, whichever is smaller. (at 20°C) [C:Rated Capacitance (µF) , V:Voltage(V)] Measurement frequency:120Hz, Temperature:20°C φD 35 51 tan δ (MAX) 63.5 76.2 90 100 10 0.65 0.9 0.85 — 1.2 2.0 2.0 2.4 2.4 V L 80 to 100 80 to 100 120 100 110 to 130 100 120 to 150 140 to 220 220 • 250 16 0.45 0.6 0.6 — 0.8 1.2 1.2 2.0 2.0 Rated voltage(V) Stability at Low Temperature Impedance ratio ZT/Z20(MAX.) Z – 25°C/ Z+20°C Z – 40°C/ Z+20°C 25 0.4 0.5 0.5 0.65 0.7 0.9 0.9 1.5 1.5 35 0.3 0.4 0.4 — 0.5 0.7 0.7 1.0 1.0 50 0.25 0.25 0.3 0.35 0.35 0.55 0.55 0.75 0.75 63 0.25 0.25 — 0.3 0.3 0.5 0.5 0.6 0.6 80 0.2 0.2 — 0.25 — 0.3 0.35 0.4 0.4 160 to 250 250 to 500 0.15 0.2 0.15 0.2 — 0.2 0.2 0.2 0.2 0.2 — 0.2 0.2 0.2 0.25 0.2 0.25 0.2 Measurement frequency : 120Hz 160 to 500 8 — 10 to 100 — 12 100 0.12 0.15 — 0.2 — 0.3 0.3 0.3 0.3 Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 5000 hours (2000 hours for 10~250V,500V) at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 300% or less of initial specified value Initial specified value or less Shelf Life After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 300% or less of initial specified value Initial specified value or less Marking Printed with white color letter on black sleeve. Type numbering system Drawing Voltage 250V or less (Example : 250V 3300µF) φ 35 Screw terminal type 1 Bottom plate 2 3 4 5 6 7 8 9 10 11 12 L N T 2 E 3 3 2 MS E Hexagenal headed bolt (M5) Mounting bracket Sleeve Configuration (φ35) Capacitance tolerance (±20%) Code less 2-leg brackets No brackets N Rated Capacitance (3300µF) 3.5 + Rated voltage (250V) (φ51 to φ100) Series name Code less 3-leg brackets Type 2-leg brackets B 10 45±1 30° 12.7±1 35 +2MAX. Pressure relief vent 7 N 10 24 15±0.5 L+3MAX. 6±1 29±1 No brackets Voltage 350V or more (Example : 450V 2200µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 L N T 2W 2 2 2 M S E G Configuration Capacitance tolerance (±20%) Rated Capacitance (2200µF) Rated voltage (450V) Series name Type Configuration Cr ( III ) Plating (RoHS compliant) SE Mounting bracket Case dia. code (φ35) Code less 2-leg brackets φD Code No brackets BN C 35 F 51 (φ51 to φ90) 63.5 G Code less 3-leg brackets 76.2 H 2-leg brackets BB No brackets J 90 BN K 100 (φ100) Code less 3-leg brackets No brackets BN Cr ( VI ) Plating SM Resin bushing available upon request. Dimension table in next page. Please contact to us if PVC less products are required. CAT.8100W ALUMINUM ELECTROLYTIC CAPACITORS NT series Screw terminal type for φ 51 and larger Hexagenal headed bolt Bottom plate Method to mount resin bushing (φ76.2) (Apply to L=150 or more) 0° 12 Sleeve 31.8±1 88.2 83.7 S P± 2 B H±1 T U A±2 ±1 MAX. Pressure relief vent φ4.5 h L+ Resin bushing Hexagenal headed bolt Sleeve Bottom plate D +2MAX. W±1 Pressure relief vent 105 120 74.4 L+3MAX. U S P A± 2 T Method to mount resin bushing (φ90) (Apply to L=150 or more) ∗B Bottom plate Sleeve Resin bushing Hexagenal headed bolt ° 120 Pressure relief vent 5 30° 7 L+3MAX. Dimension of terminal pitch (W) and length (R) and Nominal dia.of bolt φD W R 51.5 22.0 6 63.5 28.6 6 76.2 31.8 6 90.5 31.8 6 100.50 41.5 10 α 3 3 3 3 4 Leg Shape (mm) M5 M5 M5 M5 M8 (mm) 3-Legs 2-Legs 51 63.5 76.2 90 100 51 63.5 76.2 90 P 32.5 38.1 44.5 50.8 56.3 33.2 40.5 46.5 53 A 38.5 43 49.2 58.5 62 40 46.5 53 59 T 7.5 8.0 7.0 8.0 8.0 6.0 7.0 6.0 6.0 S 5.0 5.0 5.0 5.0 5.0 4.5 4.5 4.5 4.5 U 12 14 14 18 16 14 14 14 14 60 60 60 60 60 30 30 30 30 H 20 25 30 35 36 25 35 35 35 h 15 20 24 25 30 15 20 20 20 ° φ6.0 Nominal.of bolt Dimensions of mounting bracket φD 57.5 63.5 65.7 7 Symbol 102.5 Pressure relief vent 95.5 5 hole shapes from the ordinary ones as illustrated P below. 31.8±1 3-leg brackets for φ90 capacitors have different P Dimensions V(Code) Surge Cap.(µF) Code 10V (1A) 16V (1C) 25V (1E) 13V 20V 32V Case size φ D ×L (mm) Rated ripple Case size φ D ×L (mm) Rated ripple Case size φ D ×L (mm) 35V (1V) 44V Rated ripple Case size φ D ×L (mm) Rated ripple 10000 103 35 × 80 4.7 15000 153 35 × 80 5.1 22000 223 33000 333 35 × 80 4.8 35 × 80 47000 473 35 × 100 6.2 68000 683 51 × 80 100000 104 150000 154 220000 35 × 80 4.9 35 × 100 5.6 5.2 35 × 100 6.2 51 × 80 7.4 35 × 100 6.8 51 × 80 8.3 51 × 100 8.4 6.8 51 × 80 7.1 51 × 120 10.2 51 × 120 12.3 51 × 100 8.6 51 × 100 9.6 63.5 × 100 11.5 63.5 × 120 13.6 51 × 120 10.8 51 × 120 11.0 63.5 × 120 13.8 76.2 × 120 15.1 224 63.5 × 120 13.2 63.5 × 120 14.1 76.2 × 120 17.0 90 × 140 17.4 330000 334 76.2 × 120 15.8 76.2 × 120 20.6 90 × 140 20.8 90 × 170 21.3 470000 474 90 × 140 17.0 90 × 140 22.1 90 × 170 22.4 90 × 220 25.4 680000 684 90 × 170 18.4 90 × 170 24.0 90 × 220 24.2 100 × 250 27.5 1000000 105 90 × 220 20.1 90 × 220 26.1 100 × 220 26.4 1500000 155 100 × 220 22.1 100 × 250 28.8 Rated Ripple (Arms) at 105°C 120Hz CAT.8100W ALUMINUM ELECTROLYTIC CAPACITORS NT series Dimensions V(Code) Surge Cap.(µF) Code 222 2200 332 3300 472 4700 682 6800 103 10000 153 15000 223 22000 333 33000 473 47000 683 68000 104 100000 154 150000 224 220000 334 330000 474 470000 50V (1H) 63V Case size φ D ×L (mm) Rated ripple V(Code) Surge Cap.(µF) Code 681 680 102 1000 152 1500 222 2200 332 3300 472 4700 682 6800 103 10000 153 15000 223 22000 333 33000 473 47000 683 68000 160V (2C) 200V Case size φ D ×L (mm) Rated ripple V(Code) Surge Cap.(µF) Code 221 220 331 330 471 470 681 680 102 1000 152 1500 222 2200 350V (2V) 400V Case size φ D ×L (mm) Rated ripple 2700 272 3300 332 3900 392 4700 472 5600 562 6800 682 8200 822 10000 12000 15000 22000 103 123 153 223 35 × 80 35 × 100 51 × 80 51 × 120 63.5 × 100 63.5 × 120 76.2 × 120 90 × 140 90 × 170 90 × 220 100 × 250 35 × 80 35 × 80 35 × 100 51 × 80 51 × 100 63.5 × 100 63.5 × 120 76.2 × 120 76.2 × 140 90 × 140 90 × 220 100 × 250 63V (1J) 79V Case size φ D ×L (mm) Rated ripple 35 × 100 51 × 80 51 × 100 63.5 × 100 63.5 × 120 76.2 × 120 90 × 140 90 × 170 90 × 220 100 × 250 4.9 5.5 6.3 8.0 9.9 12.8 16.8 19.5 22.0 24.3 26.1 200V (2D) 250V Case size φ D ×L (mm) Rated ripple 35 × 80 35 × 100 51 × 80 51 × 100 63.5 × 100 63.5 × 120 76.2 × 120 76.2 × 140 90 × 140 90 × 220 90 × 250 1.6 2.1 2.7 3.8 4.5 6.8 7.8 9.8 12.5 13.4 17.2 19.2 Coeff. 10 to 100V 160 to 250V 350 to 500V 60 0.90 0.88 0.82 1.7 2.3 2.9 3.9 5.1 7.0 8.2 10.4 15.1 16.6 19.9 400V (2G) 450V Case size φ D ×L (mm) Rated ripple 35 × 80 1.6 35 × 80 2.3 35 × 100 3.1 51 × 80 4.2 51 × 80 6.6 51 × 120 9.1 63.5 × 100 11.5 63.5 × 110 13.1 35 × 80 35 × 80 51 × 80 51 × 80 51 × 100 51 × 120 63.5 × 100 2.1 2.8 4.1 6.5 8.6 11.0 12.7 63.5 × 110 14.4 63.5 × 130 15.4 63.5 × 130 16.8 63.5 × 150 76.2 × 120 63.5 × 170 76.2 × 130 19.8 19.7 22.7 22.2 63.5 × 150 76.2 × 110 63.5 × 170 76.2 × 130 17.9 18.2 20.7 20.3 76.2 × 150 23.7 76.2 × 150 26.2 76.2 × 170 90 × 150 90 × 150 90 × 190 90 × 220 100 × 250 76.2 × 170 90 × 150 30.3 29.3 32.4 36.0 42.9 48.0 90 × 170 90 × 190 90 × 220 100 × 220 120 1.00 1.00 1.00 360 1.08 1.08 1.20 1k 1.15 1.15 1.35 35 × 80 35 × 100 51 × 80 51 × 100 63.5 × 100 76.2 × 100 76.2 × 120 90 × 140 90 × 170 90 × 220 100 × 250 3.5 3.9 5.4 6.4 8.4 9.9 13.4 17.0 18.6 21.6 24.8 100V (2A) 125V Case size φ D ×L (mm) Rated ripple 35 × 80 2.4 35 × 80 3.3 35 × 100 3.8 51 × 80 5.2 51 × 100 6.7 63.5 × 100 7.8 76.2 × 100 9.9 76.2 × 140 12.7 90 × 140 17.0 90 × 170 18.2 90 × 220 20.6 100 × 220 23.4 250V (2E) 300V Case size φ D ×L (mm) Rated ripple 35 × 80 1.4 35 × 100 1.9 51 × 80 2.4 51 × 100 3.2 63.5 × 100 4.3 63.5 × 120 5.9 76.2 × 120 7.1 90 × 140 9.6 90 × 170 12.7 90 × 220 15.4 100 × 250 17.0 450V (2W) 500V Case size φ D ×L (mm) Rated ripple 35 × 80 1.8 35 × 100 2.4 51 × 80 3.4 51 × 100 4.4 51 × 100 7.0 51 × 120 9.2 63.5 × 110 11.8 63.5 × 130 13.8 76.2 × 110 14.5 63.5 × 150 16.5 76.2 × 130 17.1 63.5 × 170 18.3 500V (2H) 550V Case size φ D ×L (mm) Rated ripple 51 × 80 51 × 80 51 × 100 51 × 120 63.5 × 110 63.5 × 130 63.5 × 150 76.2 × 130 63.5 × 170 76.2 × 150 2.7 3.2 4.2 5.5 7.1 9.3 11.0 11.0 12.9 13.0 14.1 17.2 16.3 76.2 × 150 21.7 76.2 × 150 76.2 × 190 90 × 150 76.2 × 190 90 × 150 26.4 24.1 90 × 150 17.8 27.6 26.9 90 × 170 28.3 90 × 170 20.7 31.0 32.9 38.3 44.5 90 × 190 90 × 220 90 × 230 90 × 250 32.5 35.1 39.2 45.6 90 × 220 90 × 250 25.5 29.9 Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 5.0 5.9 6.9 9.4 11.2 13.5 17.8 21.0 23.7 26.1 80V (1K) 100V Case size φ D ×L (mm) Rated ripple 10k or more 1.15 1.20 1.40 CAT.8100W