RF80J271MDN1PX

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RF8 Low ESR / ESL, Low Profile (φ5) Low ESR/ESL, High ripple current. Low Profile(Height 8mm). Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RS8 Lower ESL RF8 Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 6.3V Rated Capacitance Range 100 to 560µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Capacitance φD±0.5MAX. FP 5ZAt 561 2.5 Product Logo Stand off Wire(Lead free) P±0.5 Aluminum case Lot No. Type numbering system (Example : 2.5V 560µF) Nichicon part number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R F 8 0 E 5 6 1 M DN 1 CG Lead Forming φd Voltage L+α 15 MAX. MIN. Control code 4 Configuration MIN. Capacitance tolerance (±20%) Rated capacitance (560µF) Rated voltage (2.5V) (mm) φD×L φd P α Series name 5×8 0.6 2.0 1.0 Type Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.10 1 kHz 0.45 10 kHz 0.50 100 kHz 1.00 300 kHz 1.00 FPCAP part number FP 2R5 RE 561 M F8 CG Control code Lead Forming Series name Capacitance tolerance (±20%) Capacitance (560µF) Configuration Voltage(2.5V) Type Dimension table in next page. CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RF8 Dimensions Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) Rated Case Size Capacitance φD×L (mm) (µF) 4.6 6.3 (0J) 7.2 Rated Ripple ESR ESL Current (mΩ) (Typ.) after (20°C/100kHz) (nH, 40MHz) (mArms) (at220℃ ( (105°C/100kHz) minutes (µA) NICHICON FPCAP 100 5×8 0.10 500 7 1.5 4200 RF80E101MDN1□□ FP-2R5RE101M-F8□□ 330 5×8 0.10 500 7 1.5 4200 RF80E331MDN1□□ FP-2R5RE331M-F8□□ 470 5×8 0.10 500 7 1.5 4200 RF80E471MDN1□□ FP-2R5RE471M-F8□□ 560 5×8 0.10 500 7 1.5 4200 RF80E561MDN1□□ FP-2R5RE561M-F8□□ 330 5×8 0.10 500 8 1.5 4000 RF80G331MDN1□□ FP-4R0RE331M-F8□□ 270 5×8 0.10 500 11 1.5 3700 RF80J271MDN1□□ FP-6R3RE271M-F8□□ 330 5×8 0.10 500 11 1.5 3700 RF80J331MDN1□□ FP-6R3RE331M-F8□□ 2.8 4.0 (0G) Leakage Current tan δ Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 2.5V 560 µF Impedance 2.5V 560 µF Frequency (kHz) Frequency (kHz) For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K