RFS1C220MCN1GS

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RFS / RFA High Capacitance (φ4, φ5) Low ESR, High Capacitance, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RFS RFA Lower ESR Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 25V Rated Capacitance Range 10 to 330µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Type numbering system (Example : 2.5V 180µF) Nichicon part number W±0.2 H±0.2 φD±0.5 FP 67AE 181 2.5 0.2MAX. C±0.2 Capacitance Lot No. P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R F S 0 E 1 8 1 M CN 1 GS Taping code Control code L±0.3 Product Logo Configuration R Voltage Capacitance tolerance (±20%) Rated capacitance (180µF) Rated voltage (2.5V) Series name Type (mm) φD×L W H C R P 4×5.2 4.3 4.3 5.1 0.5 to 0.9 1.0 5×5.7 5.3 5.3 5.9 0.5 to 0.9 1.4 FPCAP part number FP 2R5 ME 181 M FS R Control code Taping code Series name Capacitance tolerance (±20%) Capacitance (180µF) Configuration Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.10 1 kHz 0.45 Dimension table in next page. 10 kHz 0.50 100 kHz 1.00 300 kHz 1.00 Voltage(2.5V) Type CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RFS / RFA Dimensions Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 2.8 4.0 (0G) 4.6 6.3 (0J) 10 (1A) 16 (1C) 25 (1E) Leakage Current Rated Ripple ESR Current (mΩ) (mArms) at 20℃ after (20°C/100kHz) ( 2 minutes ( (105°C/100kHz) NICHICON FPCAP 300 21 2670 RFS0E181MCN1GS FP-2R5ME181M-FSR 0.12 500 10 3300 RFA0E331MCN1GS FP-2R5ME331M-FAR 5×5.7 0.12 300 22 2610 RFS0G101MCN1GS FP-4R0ME101M-FSR 150 5×5.7 0.12 300 22 2610 RFS0G151MCN1GS FP-4R0ME151M-FSR 47 5×5.7 0.12 300 30 2000 RFS0J470MCN1GS FP-6R3ME470M-FSR 100 5×5.7 0.12 300 24 2500 RFS0J101MCN1GS FP-6R3ME101M-FSR 120 5×5.7 0.12 300 24 2500 RFS0J121MCN1GS FP-6R3ME121M-FSR 180 5×5.7 0.12 567 17 3390 RFA0J181MCN1GS FP-6R3ME181M-FAR 10 4×5.2 0.12 100 220 700 RFS1A100MCN1GB FP-010ME100M-FSR 68 5×5.7 0.12 300 30 2000 RFS1A680MCN1GS FP-010ME680M-FSR 22 5×5.7 0.12 100 45 1210 RFS1C220MCN1GS FP-016ME220M-FSR 33 5×5.7 0.12 105 35 2070 RFS1C330MCN1GS FP-016ME330M-FSR 39 5×5.7 0.12 125 35 2070 RFS1C390MCN1GS FP-016ME390M-FSR 100 5×5.7 0.12 320 27 3000 RFS1C101MCN1GS FP-016ME101M-FSR 22 5×5.7 0.12 300 40 2200 RFS1E220MCN1GS FP-025ME220M-FSR 27 5×5.7 0.12 135 40 2450 RFS1E270MCN1GS FP-025ME270M-FSR Rated Capacitance (µF) Case Size φD×L (mm) tan δ 180 5×5.7 0.12 330 5×5.7 100 (µA) 7.2 11.5 18.4 28.7 Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 4.0V 150µF (RFS) Impedance 4.0V 150µF (RFS) Frequency (kHz) Frequency (kHz) For taping specifications, recommended conditions of soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K