RHA0E681MCN1GS

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RHS / RHA High Capacitance (φ8) Low ESR, High Capacitance, High ripple current. Load life of 2000 / 5000 hours at 105°C. SMD type : Lead free reflow soldering condition at 　260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RHS RHA Lower ESR Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 35V Rated Capacitance Range 56 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions 0.2MAX. H±0.2 FP 65BC 391 6.3 φD±0.5 W±0.2 P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 RHS 0 J 3 9 1 M CN 1 GS Taping code L±0.3 Product Logo Type numbering system (Example : 6.3V 390µF) Nichicon part number C±0.2 Capacitance Lot No. Control code R Configuration Voltage Capacitance tolerance (±20%) Rated capacitance (390µF) Rated voltage (6.3V) (mm) φD×L W H C R P 8×6.7 8.3 8.3 9.0 0.8 to 1.1 3.2 8×7.7 8.3 8.3 9.0 0.8 to 1.1 3.2 8×8.7 8.3 8.3 9.0 0.8 to 1.1 3.2 8×11.7 8.3 8.3 9.0 0.8 to 1.1 3.2 Series name Type FPCAP part number FP 6R3 ME 391 M HS R Control code Taping code Series name Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.10 1 kHz 0.45 10 kHz 0.50 100 kHz 1.00 Capacitance tolerance (±20%) 300 kHz 1.00 Capacitance (390µF) Configuration Voltage(6.3V) Type Dimension table in next page. CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RHS / RHA Dimensions Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 4.0 (0G) 6.3 (0J) 10 (1A) 16 (1C) 20 (1D) 25 (1E) 35 (1V) Rated Capacitance (µF) 2.8 4.6 7.2 11.5 18.4 Leakage Current Rated Ripple ESR Current (mΩ) NICHICON (mArms) (20°C/100kHz) (105°C/100kHz) 8 RHA0E681MCN1GS 5000 Case Size φD×L (mm) tan δ 680 8×6.7 0.12 700 820 8×11.7 0.12 700 9 5400 RHS0E821MCN1GS FP-2R5ME821M-HSR 820 8×6.7 0.12 700 8 5000 RHA0E821MCN1GS FP-2R5ME821M-HAR 1000 8×7.7 0.12 750 8 5000 RHA0E102MCN1GS FP-2R5ME102M-HAR 1500 8×11.7 0.12 1125 9 5400 RHS0E152MCN1GS FP-2R5ME152M-HSR 560 8×6.7 0.12 700 16 3200 RHS0G561MCN1GS FP-4R0ME561M-HSR 560 8×6.7 0.12 700 8 5000 RHA0G561MCN1GS FP-4R0ME561M-HAR 680 8×7.7 0.12 816 8 5000 RHA0G681MCN1GS FP-4R0ME681M-HAR 1200 8×11.7 0.12 1440 9 5400 RHS0G122MCN1GS FP-4R0ME122M-HSR 1500 8×11.7 0.12 1800 12 4700 RHS0G152MCN1GS FP-4R0ME152M-HSR 330 8×6.7 0.12 700 9 4500 RHA0J331MCN1GS FP-6R3ME331M-HAR 390 8×6.7 0.12 737 18 3200 RHS0J391MCN1GS FP-6R3ME391M-HSR 390 8×6.7 0.12 737 9 4500 RHA0J391MCN1GS FP-6R3ME391M-HAR 470 8×6.7 0.12 888 9 4500 RHA0J471MCN1GS FP-6R3ME471M-HAR 560 8×7.7 0.12 1058 9 4500 RHA0J561MCN1GS FP-6R3ME561M-HAR 820 8×11.7 0.12 1550 10 5150 RHS0J821MCN1GS FP-6R3ME821M-HSR 1000 8×11.7 0.12 1890 10 5150 RHS0J102MCN1GS FP-6R3ME102M-HSR 150 8×6.7 0.12 700 25 3000 RHS1A151MCN1GS FP-010ME151M-HSR 330 8×7.7 0.12 660 19 3390 RHS1A331MCN1GS FP-010ME331M-HSR 150 8×6.7 0.12 700 22 3220 RHA1C151MCN1GS FP-016ME151M-HAR 270 8×6.7 0.12 864 22 3300 RHA1C271MCN1GS FP-016ME271M-HAR 270 8×8.7 0.12 864 16 4000 RHA1C271MCN9GS FP-016ME271M-HAR-US 270 8×8.7 0.12 864 16 4070 RHA1C271MCNBSQGS FP-016ME271M-HAR-5K-US 330 8×8.7 0.12 1056 16 4000 RHA1C331MCN1GS FP-016ME331M-HAR 330 8×8.7 0.12 1056 16 4070 RHA1C331MCNASQGS FP-016ME331M-HAR-5K 390 8×8.7 0.12 1248 16 4000 RHA1C391MCN1GS FP-016ME391M-HAR 390 8×8.7 0.12 1248 16 4070 RHA1C391MCNASQGS FP-016ME391M-HAR-5K 470 8×8.7 0.12 1504 16 4000 RHA1C471MCN1GS FP-016ME471M-HAR 470 8×8.7 0.12 1504 16 4070 RHA1C471MCNASQGS FP-016ME471M-HAR-5K 560 8×8.7 0.12 1792 16 4070 RHA1C561MCN1GS FP-016ME561M-HAR 560 8×11.7 0.12 1792 14 4950 RHS1C561MCN1GS FP-016ME561M-HSR 560 8×8.7 0.12 1792 16 4070 RHA1C561MCNASQGS FP-016ME561M-HAR-5K 680 8×11.7 0.12 2176 14 4950 RHS1C681MCN1GS FP-016ME681M-HSR 1560 14 4950 RHS1D391MCN1GS FP-020ME391M-HSR (µA) after (at220℃ minutes ( FPCAP FP-2R5ME681M-HAR 23.0 390 8×11.7 0.12 28.7 100 8×8.7 0.12 700 18 4000 RHS1E101MCN1GS FP-025ME101M-HSR 56 8×8.7 0.12 392 25 3000 RHS1V560MCN1GS FP-035ME560M-HSR 100 8×8.7 0.12 700 25 3000 RHS1V101MCN1GS FP-035ME101M-HSR 40.2 : Load life 5000hours. Blue : New product Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 4.0V 560µF (RHA) Impedance 4.0V 560 µF (RHA) Frequency (kHz) For taping specifications, recommended conditions of soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. Frequency (kHz) CAT.8100K