RNE0J122MDN1

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RNE High Capacitance Low ESR, High Capacitance, High ripple current. Load life of 2000/5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). RNU Higher Capacitance RNE Higher Capacitance RS6 Specifications Item RNL Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 100 to 1200µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Product Logo φD±0.5MAX. Stand off Wire(Lead free) P±0.5 Aluminum case Capacitance FP5K 68Lr 471 16 Lot No. Type numbering system (Example : 16V 470µF) Nichicon part number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 R N E 1 C 4 7 1 M DN A S Q KX Lead Forming φd Voltage L+αMAX. 15MIN. Control code Configuration 4MIN. Capacitance tolerance (±20%) Rated capacitance (470µF) Rated voltage (16V) (mm) φD×L φd P α 5×8 0.5 2.0 1.0 Series name Type 5×10 0.5 2.0 1.0 6.3×10 0.5 2.5 1.0 8×6 0.6 3.5 1.0 8×9 0.6 3.5 1.0 Control code 8×11.5 0.6 3.5 1.5 Lead Forming 10×12.5 0.6 5.0 1.5 FPCAP part number FP 016 RE 471 M NE K 5K Series name Capacitance tolerance (±20%) Capacitance (470µF) Frequency coefficient of rated ripple current Frequency 120 Hz Coefficient 0.10 1 kHz 0.45 Dimension table in next page. 10 kHz 0.50 100 kHz 1.00 Configuration 300 kHz 1.00 Voltage(16V) Type 94 CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RNE Standard Ratings Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 2.8 6.3 (0J) 7.2 10 (1A) 11.5 16 (1C) Rated Ripple ESR Current (mΩ) (mArms) (20°C/100kHz) (105°C/100kHz) Rated Capacitance (µF) Case Size φD×L (mm) tan δ Leakage Current (µA, 2min.) 680 8×6 0.10 500 8 4900 RNE0E681MDN1□□ FP-2R5RE681M-NE□□ 270 5×8 0.10 500 12 3600 RNE0J271MDS1□□ FP-6R3RE271M-NE□□ 1200 8×9 0.08 1512 10 5700 RNE0J122MDN1□□ FP-6R3RE122M-NE□□ 220 6.3×10 0.08 440 30 2500 RNE1A221MDS1□□ FP-010RE221M-NE□□ 100 5×10 0.08 320 35 2300 RNE1C101MDS1□□ FP-016RE101M-NE□□ 220 8×6 0.1 500 13 4150 RNE1C221MDN1□□ FP-016RE221M-NE□□ 470 8×11.5 0.08 1504 10 5400 RNE1C471MDN1□□ FP-016RE471M-NE□□ 470 8×11.5 0.08 1504 10 5400 RNE1C471MDNASQ□□ FP-016RE471M-NE□□-5K 560 8×11.5 0.08 1792 14 5000 RNE1C561MDNASQ□□ FP-016RE561M-NE□□-5K 820 10×12.5 0.08 2624 11 5600 RNE1C821MDN1□□ FP-016RE821M-NE□□ 1000 10×12.5 0.08 3200 10 6100 RNE1C102MDN1□□ FP-016RE102M-NE□□ 1000 10×12.5 0.08 3200 10 6100 RNE1C102MDNASQ□□ FP-016RE102M-NE□□-5K 18.4 NICHICON FPCAP : Load life 5000hours. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) µ Impedance µ Frequency (kHz) Frequency (kHz) Taping specifications are given in page 26, 27. Please refer to page 3 for the minimum order quantity. 95