RNE1A221MDS1JX

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RNE High Capacitance Low ESR, High Capacitance, High ripple current. Load life of 2000/5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RNU Higher Capacitance RNE Higher Capacitance RS6 Specifications Item RNL Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 25V Rated Capacitance Range 100 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions [φ5×8 / φ5×10 / φ6.3×10 / φ8×6 / φ8×9 / φ8×11.5 / φ10×12.5] Product Logo Stand off Wire(Lead free) φD±0.5MAX. FP5K 68Lr 471 16 Capacitance P±0.5 Aluminum case Lot No. Type numbering system (Example : 16V 470µF) Nichicon part number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 R N E 1 C 4 7 1 M DN A S Q KX Lead Forming φd Voltage L+α 15 MAX. MIN. Control code Configuration 4 MIN. Capacitance tolerance (±20%) [φ8×11.5(-H or -5KH)] Rated capacitance (470µF) Aluminum case Rated voltage (16V) Series name P±0.5 φD±0.5MAX. Wire(Lead free) Type FPCAP part number φd L+αMAX. 15MIN. (mm) FP 4MIN. 016 RE 471 M NE K 5K Control code Lead Forming φD×L φd P α Series name 5×8 0.5 2.0 1.0 Capacitance tolerance (±20%) 5×10 0.5 2.0 1.0 Capacitance (470µF) 6.3×10 0.5 2.5 1.0 Configuration 8×6 0.6 3.5 1.0 Voltage(16V) 8×9 0.6 3.5 1.0 Type 8×11.5 0.6 3.5 1.5 10×12.5 0.6 5.0 1.5 Frequency coefficient of rated ripple current Frequency 120 Hz Coefficient 0.10 1 kHz 0.45 Dimension table in next page. 10 kHz 0.50 100 kHz 1.00 300 kHz 1.00 CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RNE ■ Dimensions Rated Voltage Surge ( V) Voltage ( code) (V) 2.5 (0E) 6.3 (0J) 10 (1A) 16 (1C) 25 (1E) 2.8 7.2 11.5 18.4 28.7 Rated Capacitance ( µF ) Case Size φD×L (mm) tan δ Leakage Current ( Rated Ripple ESR Current (mΩ) at 20°C after (20°C/100kHz) (mArms) (105°C/100kHz) 2 minutes (µA) ) NICHICON FPCAP 680 8×6 0.1 500 8 4900 RNE0E681MDN1 □□ FP-2R5RE681M-NE □□ ＊820 8×6 0.1 500 8 4900 RNE0E821MDNASQ □□ FP-2R5RE821M-NE □□ -5K ＊820 8×6 0.1 500 8 4900 RNE0E821MCNASQ □□ FP-2R5RE821M-NE □□ -5KH 270 5×8 0.1 500 12 3600 RNE0J271MDS1 □□ FP-6R3RE271M-NE □□ 330 5×8 0.1 500 10 3700 RNE0J331MDS1 □□ FP-6R3RE331M-NE □□ 330 5×8 0.1 500 10 3700 RNE0J331MCS1 □□ FP-6R3RE331M-NE □□ -H 1200 8×9 0.08 1512 10 5700 RNE0J122MDN1 □□ FP-6R3RE122M-NE □□ 1500 8×11.5 0.12 1890 10 5400 RNE0J152MDN1 □□ FP-6R3RE152M-NE □□ 1500 8×11.5 0.12 1890 10 5400 RNE0J152MCN1 □□ FP-6R3RE152M-NE □□ -H 220 6.3×10 0.08 440 30 2500 RNE1A221MDS1 □□ FP-010RE221M-NE □□ 100 5×10 0.08 320 35 2300 RNE1C101MDS1 □□ FP-016RE101M-NE □□ 220 8×6 0.1 500 13 4150 RNE1C221MDN1 □□ FP-016RE221M-NE □□ 470 8×11.5 0.08 1504 10 5400 RNE1C471MDN1 □□ FP-016RE471M-NE □□ 470 8×11.5 0.08 1504 10 5400 RNE1C471MCN1 □□ FP-016RE471M-NE □□ -H ＊470 8×11.5 0.08 1504 10 5400 RNE1C471MDNASQ □□ FP-016RE471M-NE □□ -5K ＊470 8×11.5 0.08 1504 10 5400 RNE1C471MCNASQ □□ FP-016RE471M-NE □□ -5KH 560 8×11.5 0.08 1792 14 5000 RNE1C561MDN1 □□ FP-016RE561M-NE □□ 560 8×11.5 0.08 1792 14 5000 RNE1C561MCN1 □□ FP-016RE561M-NE □□ -H ＊560 8×11.5 0.08 1792 14 5000 RNE1C561MDNASQ □□ FP-016RE561M-NE □□ -5K ＊560 8×11.5 0.08 1792 14 5000 RNE1C561MCNASQ □□ FP-016RE561M-NE □□ -5KH 680 8×11.5 0.08 2176 10 5230 RNE1C681MCN1 □□ FP-016RE681M-NE □□ -H ＊680 8×11.5 0.08 2176 10 5230 RNE1C681MCNASQ □□ FP-016RE681M-NE □□ -5KH 820 10×12.5 0.08 2624 11 5600 RNE1C821MDN1 □□ FP-016RE821M-NE □□ ＊820 10×12.5 0.08 2624 11 5600 RNE1C821MDNASQ □□ FP-016RE821M-NE □□ -5K 1000 10×12.5 0.08 3200 10 6100 RNE1C102MDN1 □□ FP-016RE102M-NE □□ ＊1000 10×12.5 0.08 3200 10 6100 RNE1C102MDNASQ □□ FP-016RE102M-NE □□ -5K ＊560 10×12.5 0.08 2800 20 3100 RNE1E561MDNASQ □□ FP-025RE561M-NE □□ -5K Blue : New product : Load life 5000hours. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) µ Impedance µ Frequency (kHz) For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. Frequency (kHz) CAT.8100K