RR50E152MDN1

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RR5 Ultra-low ESR Ultra Low ESR, High ripple current. Load life of 2000 hours at 105°C. RR7 Lower ESR Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RR5 Lower Profile RE5 Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 6.3V Rated Capacitance Range 390 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Product Logo Stand off Wire(Lead free) φD±0.5MAX. FP 57Nm 471 6.3 Capacitance P±0.5 Aluminum case Lot No. Type numbering system (Example : 6.3V 470µF) Nichicon part number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 RR 5 0 J 4 7 1 M DN 1 K X Lead Forming φd Voltage L+α 15 MAX. MIN. Control code Configuration 4 MIN. Capacitance tolerance (±20%) Rated capacitance (470µF) Rated voltage (6.3V) (mm) φD×L φd P α Series name 8×11.5 0.6 3.5 1.5 Type 10×12.5 0.6 5.0 1.5 Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.10 1 kHz 0.45 10 kHz 0.50 100 kHz 1.00 FPCAP part number 300 kHz 1.00 FP 6R3 RE 471 M R5 K Control code Lead Forming Series name Capacitance tolerance (±20%) Capacitance (470µF) Configuration Voltage(6.3V) Type Dimension table in next page. CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RR5 Dimensions Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 2.8 4.0 (0G) 4.6 6.3 (0J) 7.2 Leakage Current Rated Ripple ESR Current (mΩ) (mArms) (20°C/100kHz) (105°C/100kHz) Rated Capacitance (µF) Case Size φD×L (mm) tan δ 560 8×11.5 0.15 350 5 680 8×11.5 0.15 425 820 8×11.5 0.15 1000 8×11.5 1500 (µA) NICHICON FPCAP 6630 RR50E561MDN1□□ FP-2R5RE561M-R5□□ 5 6630 RR50E681MDN1□□ FP-2R5RE681M-R5□□ 513 5 6630 RR50E821MDN1□□ FP-2R5RE821M-R5□□ 0.15 625 5 6630 RR50E102MDN1□□ FP-2R5RE102M-R5□□ 10×12.5 0.15 938 5 7220 RR50E152MDN1□□ FP-2R5RE152M-R5□□ 560 8×11.5 0.15 560 5 6630 RR50G561MDN1□□ FP-4R0RE561M-R5□□ 820 10×12.5 0.15 820 5 7220 RR50G821MDN1□□ FP-4R0RE821M-R5□□ 1200 10×12.5 0.15 1200 5 7220 RR50G122MDN1□□ FP-4R0RE122M-R5□□ 390 8×11.5 0.15 614 5 6630 RR50J391MDN1□□ FP-6R3RE391M-R5□□ 470 8×11.5 0.15 592 5 6630 RR50J471MDN1□□ FP-6R3RE471M-R5□□ 680 10×12.5 0.15 1071 5 7220 RR50J681MDN1□□ FP-6R3RE681M-R5□□ 820 10×12.5 0.15 1292 5 7220 RR50J821MDN1□□ FP-6R3RE821M-R5□□ after ( at220℃ minutes ( Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) µ Impedance µ Frequency (kHz) Frequency (kHz) For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K