RR71C680MDN1

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RR7 Low ESR Ultra Low ESR, High ripple current. Load life of 2000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). RNS Lower ESR RR7 Lower ESR RR5 Lower Profile RL8 Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 68 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Product Logo Stand off Wire(Lead free) φD±0.5MAX. FP 65Cb 331 16 Capacitance P±0.5 Aluminum case Lot No. Type numbering system (Example : 16V 330µF) Nichicon part number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 RR 7 1 C 3 3 1 M DN 1 CG Lead Forming φd Voltage L+α 15 MAX. MIN. Control code Configuration 4 MIN. Capacitance tolerance (±20%) Rated capacitance (330µF) Rated voltage (16V) Series name (mm) φD×L φd P α 8×11.5 0.6 3.5 1.5 10×12.5 0.6 5.0 1.5 Type FPCAP part number FP 1 kHz 0.45 10 kHz 0.50 100 kHz 1.00 RE 331 M R7 CG Control code Frequency coefficient of rated ripple current Frequency 120 Hz Coefficient 0.10 016 Lead Forming 300 kHz 1.00 Series name Capacitance tolerance (±20%) Capacitance (330µF) Configuration Voltage(16V) Type Dimension table in next page. 80 CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RR7 Standard Ratings Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 4.0 (0G) 6.3 (0J) 10 (1A) 16 (1C) 2.8 4.6 7.2 11.5 18.4 Rated Ripple ESR Current (mΩ) (mArms) (20°C/100kHz) (105°C/100kHz) Rated Capacitance (µF) Case Size φD×L (mm) tan δ Leakage Current (µA, 2min.) 680 8×11.5 0.08 425 7 820 8×11.5 0.08 513 1500 10×12.5 0.08 560 8×11.5 820 NICHICON FPCAP 5600 RR70E681MDN1□□ FP-2R5RE681M-R7□□ 7 5600 RR70E821MDN1□□ FP-2R5RE821M-R7□□ 938 7 6100 RR70E152MDN1□□ FP-2R5RE152M-R7□□ 0.08 224 7 5600 RR70G561MDN1□□ FP-4R0RE561M-R7□□ 10×12.5 0.08 328 7 6100 RR70G821MDN1□□ FP-4R0RE821M-R7□□ 1200 10×12.5 0.15 960 7 6100 RR70G122MDN1□□ FP-4R0RE122M-R7□□ 150 8×11.5 0.07 47 7 5600 RR70J151MDN1□□ FP-6R3RE151M-R7□□ 220 8×11.5 0.07 69 7 5600 RR70J221MDN1□□ FP-6R3RE221M-R7□□ 330 10×12.5 0.07 104 7 6100 RR70J331MDN1□□ FP-6R3RE331M-R7□□ 390 8×11.5 0.08 246 7 5600 RR70J391MDN1□□ FP-6R3RE391M-R7□□ 680 10×12.5 0.08 428 7 6100 RR70J681MDN1□□ FP-6R3RE681M-R7□□ 820 10×12.5 0.12 517 7 6100 RR70J821MDN1□□ FP-6R3RE821M-R7□□ 1000 10×12.5 0.12 630 7 6100 RR70J102MDN1□□ FP-6R3RE102M-R7□□ 100 8×11.5 0.07 50 7 5600 RR71A101MDN1□□ FP-010RE101M-R7□□ 220 10×12.5 0.07 110 7 6100 RR71A221MDN1□□ FP-010RE221M-R7□□ 470 10×12.5 0.08 470 7 6100 RR71A471MDN1□□ FP-010RE471M-R7□□ 680 10×12.5 0.10 1360 7 6100 RR71A681MDN1□□ FP-010RE681M-R7□□ 68 8×11.5 0.06 54 7 5600 RR71C680MDN1□□ FP-016RE680M-R7□□ 100 8×11.5 0.06 80 7 5600 RR71C101MDN1□□ FP-016RE101M-R7□□ 150 10×12.5 0.06 120 7 6100 RR71C151MDN1□□ FP-016RE151M-R7□□ 270 10×12.5 0.08 648 7 6100 RR71C271MDN1□□ FP-016RE271M-R7□□ 330 10×12.5 0.08 792 7 6100 RR71C331MDN1□□ FP-016RE331M-R7□□ Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) µ µ Impedance µ µ Frequency (kHz) Frequency (kHz) Taping specifications are given in page 26, 27. Please refer to page 3 for the minimum order quantity. 81