RS61E330MCN1

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RS6 Miniature Sized, High Capacitance Low ESR, High Capacitance, High ripple current. Miniature Sized. Load life of 2000 / 5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RNE Higher Capacitance RS6 Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 25V Rated Capacitance Range 33 to 560µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value. Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Type numbering system (Example : 2.5V 560µF) Nichicon part number [φ6.3×6] Stand off Wire(Lead free) φD±0.5MAX. FP 59Ap 561 2.5 Capacitance P±0.5 Aluminum case Lot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 RS 6 0 E 5 6 1 M CN 1 J T Lead Forming Control code Configuration φd Capacitance tolerance (±20%) Product Logo L+αMAX. Voltage 15MIN. 4MIN. Rated capacitance (560µF) Rated voltage (2.5V) Series name [φ6.3×5 / φ6.3×6(-H)] Type φD±0.5MAX. Wire(Lead free) FPCAP part number φd L+αMAX. 15MIN. P±0.5 Aluminum case 4MIN. FP 2R5 RE 561 M S6 JT Control code (mm) φD×L φd P α 6.3×5 0.5 2.5 1.0 6.3×6 0.45 2.5 1.0 Lead Forming Series name Capacitance tolerance (±20%) Capacitance (560µF) Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.10 1 kHz 0.45 Dimension table in next page. 10 kHz 0.50 100 kHz 1.00 Configuration 300 kHz 1.00 Voltage(2.5V) Type CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RS6 ■ Dimensions Rated Voltage Surge (V ) Voltage ( code) ( V) 2.5 (0E) 6.3 (0J) 10 (1A) 16 (1C) 25 (1E) Leakage Current Rated Ripple ESR Current (mΩ) at 20°C after (20°C/100kHz) (mArms) (105°C/100kHz) 2 minutes Rated Capacitance (µF ) Case Size φD×L (mm) tan δ 390 6.3×5 0.10 500 12 3500 RS60E391MCN1 □□ FP-2R5RE391M-S6 □□ 560 6.3×5 0.12 700 13 3600 RS60E561MCN1 □□ FP-2R5RE561M-S6 □□ ＊560 6.3×5 0.12 700 13 3600 RS60E561MCNASQ □□ FP-2R5RE561M-S6 □□ -5K 7.2 220 6.3×5 0.12 500 15 3200 RS60J221MCN1 □□ FP-6R3RE221M-S6 □□ 11.5 150 6.3×5 0.10 450 25 2500 RS61A151MCN1 □□ FP-010RE151M-S6 □□ 100 6.3×6 0.10 500 24 2490 RS61C101MDS1 □□ FP-016RE101M-S6 □□ 100 6.3×6 0.10 500 24 2490 RS61C101MCS1 □□ FP-016RE101M-S6 □□ -H 180 6.3×5 0.10 576 20 3200 RS61C181MCN1 □□ FP-016RE181M-S6 □□ 33 6.3×5 0.10 165 60 1700 RS61E330MCN1 □□ FP-025RE330M-S6 □□ 47 6.3×5 0.10 235 30 2800 RS61E470MCN1 □□ FP-025RE470M-S6 □□ 56 6.3×5 0.10 280 30 2800 RS61E560MCN1 □□ FP-025RE560M-S6 □□ 2.8 18.4 28.7 ( (µA) ) NICHICON FPCAP : Load life 5000hours. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) µ Impedance µ Frequency (kHz) Frequency (kHz) For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K