RS81C101MDN1JT

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RS8 Low ESR / ESL, Low Profile (φ6.3) RL8 Low ESR/ESL, High ripple current. Low Profile(Height 8mm). Load life of 2000/5000 hours at 105°C. Radial lead type : Lead free flow soldering condition correspondence. Compliant to the RoHS directive (2011/65/EU). Lower ESL RS8 Lower ESL RF8 Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 100 to 1200µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000 / 5000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest to the capacitor body. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Aluminum case Capacitance 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RS 8 0 J 5 6 1 M DN ASQ JT Lead Forming φd Voltage L+α [φ6.3×8(-H)] Control code 15 MAX. Configuration 4 MIN. MIN. Capacitance tolerance (±20%) Rated capacitance (560µF) Rated voltage (6.3V) Aluminum case φD±0.5MAX. Wire(Lead free) Series name Type FPCAP part number φd L+α MAX. FP 15 4 MIN. MIN. φd P α 6.3×8 0.6 2.5 1.0 Dimension table in next page. 10 kHz 0.50 100 kHz 1.00 RE 561 M S8 JT 5K Control code Series name Capacitance tolerance (±20%) Capacitance (560µF) Configuration Frequency coefficient of rated ripple current 1 kHz 0.45 6R3 Lead Forming (mm) φD×L Frequency 120 Hz Coefficient 0.10 Type numbering system (Example : 6.3V 560µF) Nichicon part number P±0.5 Product Logo Stand off Wire(Lead free) φD±0.5MAX. FP5K 69Ch 561 6.3 Lot No. P±0.5 [φ6.3×8] Voltage(6.3V) 300 kHz 1.00 Type 88 CAT.8100H CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RS8 Dimensions Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 4.0 (0G) 6.3 (0J) 16 (1C) Rated Case Size Capacitance φD×L (mm) (µF) 2.8 18.4 Rated Ripple Leakage ESR ESL Current Current (mΩ) (Typ.) (mArms) (µA, 2min.) (20°C/100kHz) (nH, 40MHz) (105°C/100kHz) NICHICON FPCAP 330 6.3×8 0.10 500 7 2 5600 RS80E331MDN1□□ FP-2R5RE331M-S8□□ 330 6.3×8 0.10 500 7 2 5600 RS80E331MDNASQ□□ FP-2R5RE331M-S8□□-5K 470 6.3×8 0.10 500 7 2 5600 RS80E471MDN1□□ FP-2R5RE471M-S8□□ 470 6.3×8 0.10 500 7 2 5600 RS80E471MDNASQ□□ FP-2R5RE471M-S8□□-5K 560 6.3×8 0.10 500 7 2 5600 RS80E561MDN1□□ FP-2R5RE561M-S8□□ 560 6.3×8 0.10 500 7 2 5600 RS80E561MDNASQ□□ FP-2R5RE561M-S8□□-5K 820 6.3×8 0.10 512 7 2 5600 RS80E821MDN1□□ FP-2R5RE821M-S8□□ 820 6.3×8 0.10 512 7 2 5600 RS80E821MDNASQ□□ FP-2R5RE821M-S8□□-5K 1200 6.3×8 0.10 750 7 2 5600 RS80E122MDN1□□ FP-2R5RE122M-S8□□ 560 6.3×8 0.10 560 7 2 5000 RS80G561MDN1□□ FP-4R0RE561M-S8□□ 560 6.3×8 0.10 560 7 2 5000 RS80G561MDNASQ□□ FP-4R0RE561M-S8□□-5K 330 6.3×8 0.10 519 8 2 5000 RS80J331MDN1□□ FP-6R3RE331M-S8□□ 330 6.3×8 0.10 519 8 2 5000 RS80J331MDNASQ□□ FP-6R3RE331M-S8□□-5K 470 6.3×8 0.10 740 8 2 5000 RS80J471MDN1□□ FP-6R3RE471M-S8□□ 470 6.3×8 0.10 740 8 2 5000 RS80J471MDNASQ□□ FP-6R3RE471M-S8□□-5K 560 6.3×8 0.10 882 8 2 5000 RS80J561MDN1□□ FP-6R3RE561M-S8□□ 560 6.3×8 0.10 882 8 2 5000 RS80J561MDNASQ□□ FP-6R3RE561M-S8□□-5K 680 6.3×8 0.10 1071 8 2 4700 RS80J681MCN1□□ FP-6R3RE681M-S8□□-H 820 6.3×8 0.10 1292 8 2 4700 RS80J821MDS1□□ FP-6R3RE821M-S8□□ 100 6.3×8 0.10 500 14 2 3800 RS81C101MDN1□□ FP-016RE101M-S8□□ 270 6.3×8 0.10 1296 15 2 3800 RS81C271MDN1□□ FP-016RE271M-S8□□ 270 6.3×8 0.10 1296 15 2 3800 RS81C271MDNASQ□□ FP-016RE271M-S8□□-5K 4.6 7.2 tan δ : Load life 5000hours. Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 2.5V 560 µF(Standard) Impedance 2.5V 560µF(Standard) Frequency (kHz) Frequency (kHz) Taping specifications are given in page 26, 27. Please refer to page 3 for the minimum order quantity. 89 CAT.8100H