RSL1C150MCN1GB

CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RSL Low Profile (φ6.3) Low ESR, High Capacitance, High ripple current. Low Profile(Height 4.2mm). Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). RSA Lower Profile RSL Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 25V Rated Capacitance Range 15 to 330µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Less than or equal to the specified value. Leakage Current ( 2) Endurance After 2 minutes' application of rated voltage at 20°C Test condition 105°C, rated voltage 2000Hrs. Capacitance change Within ±20% of initial value before test tan δ 150% or less than the initial specified value ESR( 1) 150% or less than the initial specified value Leakage current ( 2) Less than or equal to the initial specified value 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. Dimensions Capacitance 0.2MAX. C±0.2 H±0.2 P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 RS L 0 E 3 3 1 M CN 1 GB Taping code Control code L±0.3 Product Logo Type numbering system (Example : 2.5V 330µF) Nichicon part number W±0.2 φD±0.5 FP 54CL 331 2.5 Lot No. R Configuration Voltage Capacitance tolerance (±20%) Rated capacitance (330µF) Rated voltage (2.5V) (mm) φD×L W H C R P 6.3×4.2 6.5 6.5 7.2 0.5 to 0.9 2.1 Type FPCAP part number Frequency coefficient of rated ripple current Frequency Coefficient 120 Hz 0.10 1 kHz 0.45 10 kHz 0.50 100 kHz 1.00 Series name 300 kHz 1.00 FP 2R5 ME 331 M SL R Control code Taping code Series name Capacitance tolerance (±20%) Capacitance (330µF) Configuration Voltage(2.5V) Type Dimension table in next page. CAT.8100K CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS RSL Dimensions Rated Voltage Surge Voltage (V) (V) (code) 2.5 (0E) 6.3 (0J) 2.8 7.2 Leakage Current Rated Ripple ESR Current (mΩ) (mArms) after (20°C/100kHz) ( at220℃ ( (105°C/100kHz) minutes Rated Capacitance (µF) Case Size φD×L (mm) tan δ 100 6.3×4.2 0.12 300 16 220 6.3×4.2 0.12 300 330 6.3×4.2 0.12 100 6.3×4.2 150 (µA) NICHICON FPCAP 3500 RSL0E101MCN1GB FP-2R5ME101M-SLR 16 3500 RSL0E221MCN1GB FP-2R5ME221M-SLR 413 16 3500 RSL0E331MCN1GB FP-2R5ME331M-SLR 0.12 315 18 3200 RSL0J101MCN1GB FP-6R3ME101M-SLR 6.3×4.2 0.12 473 18 3200 RSL0J151MCN1GB FP-6R3ME151M-SLR 220 6.3×4.2 0.12 693 18 3200 RSL0J221MCN1GB FP-6R3ME221M-SLR 10 (1A) 11.5 100 6.3×4.2 0.12 500 25 2500 RSL1A101MCN1GB FP-010ME101M-SLR 16 (1C) 18.4 15 6.3×4.2 0.12 300 45 1900 RSL1C150MCN1GB FP-016ME150M-SLR 25 (1E) 28.7 15 6.3×4.2 0.12 100 55 1700 RSL1E150MCN1GB FP-025ME150M-SLR Frequency Characteristics (The frequency characteristics are typical and not a guaranteed value.) 6.3V 220 µF Impedance 6.3V 220µF Frequency (kHz) Frequency (kHz) For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K