ALUMINUM ELECTROLYTIC CAPACITORS
AQ
Wide Temperature Range, Permissible Abnormal Voltage
(Radial Lead Type) series
Improved safety feature for abnormally excessive voltage. High ripple current product. Adapted to the RoHS directive (2002/95/EC).
AQ
Smaller
AS
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ
Performance Characteristics – 40 ~ +105°C 200 · 400V 10 ~ 220µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is 0.04CV+100 (µA) or less.
Rated voltage (V) tan δ ( MAX.)
200 0.15
400 0.15
Measurement frequency:120Hz, Temperature:20°C
Rated voltage (V)
Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.)
Z– 25°C / Z+20°C Z– 40°C / Z+20°C
200 3 6
400 8 10
Measurement frequency : 120Hz
Endurance
Shelf Life
After an application of D.C. bias voltage plus the rated ripple Capacitance change Within ±20% of initial value current for 2000 hours at 105°C the peak voltage shall not tan δ 200% or less of initial specified value exceed the rated D.C. voltage, capacitors meet the Leakage current Initial specified value or less characteristic requirements listed at right. After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Test conditions voltage (V)
Safety Performance
200 400 Marking
Limited DC current 4A 2A
Test Voltage 300VDC and 375VDC 500VDC and 600VDC
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Type numbering system (Example : 200V 100 µF)
B
Sleeve (P.E.T.)
D+ MAX.
d
UAQ 2 D 1 0 1 MHD
P±0.5
1 2 3 4 5 6 7 8 9 10 11 12 Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (100µF) Rated voltage (200V) Series name Type
B
Pressure relief vent
B
L+ MAX.
15MIN
4MIN
• Please refer to page 21 about the end seal configulation.
D 10 12.5 16 18 0.5 0.5 0.5 0.5 P 5.0 5.0 7.5 7.5 B d 0.6 0.6 0.8 0.8 (BD 18) 2.0 (BD >18) 3.0
(mm)
22 1.0 10 1.0
In case L>25 for B12.5 (D) case sizes, lead diameter B0.8 (d) will be applied.
200 (2D) φ16
Configuration Pb-free leadwire BD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD 22 RD
400 (2G)
Dimensions
V(Code) Cap.(µF) Code
φD
φ10
φ12.5
φ18
φ22
010 022 033 047 056 068 082 100 150 180 220
100 220 330 470 560 680 820 101 151 181 221
10 × 20 120 10 × 25 160 0.10 × 31.5 195
12.5 × 20.0 160 12.5 × 20.0 195 12.5 × 25.0 210 12.5 × 25.0 250 12.5 × 31.5 285 12.5 × 35.5 335
12.5 × 20.0 100 12.5 × 31.5 145 12.5 × 40.0 195
φ12.5
φ16
φ18
φ22
16 × 20 285 16 × 25 335 0.16 × 31.5 435 0.16 × 35.5 495
16 × 20 145 16 × 25 195 0.16 × 35.5 280 0.16 × 35.5 320 16 × 40 350
Frequency coefficient of rated ripple current
Frequency
Coefficient
50, 60Hz 0.80
120Hz 1.00
300Hz 1.25
1kHz 1.40
10kHz ~ 1.60
18 × 20 335 18 × 25 22 × 20 435 435 18 × 31.5 22 × 25 495 495 0.18 × 35.5 Case size φ D×L (mm) 575 Rated ripple Rated Ripple (mArms) at 105°C 120Hz : In case of low profile type, 6 will be put at 12th digit of type numbering system. : For further low profile product, 3 will be put at 12th digit.
18 × 20 195 18 × 25 280 18 × 31.5 320 18 × 35.5 350 18 × 40 420
22 × 20 280 22 × 25 320
Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity.
CAT.8100V
很抱歉,暂时无法提供与“UAQ2G220MHD”相匹配的价格&库存,您可以联系我们找货
免费人工找货