UAS2G470MHD

ALUMINUM ELECTROLYTIC CAPACITORS UAS Wide Temperature Range, Miniature Type Permissible Abnormal Voltage UAQ Improved safety feature for abnormally excessive voltage. High ripple current product. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Smaller UAS Specifications Performance Characteristics –40 to +105°C 200V, 400V 22 to 330µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is 0.04CV+100 (µA) or less. Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current 200 0.15 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 400 0.15 Measurement frequency:120Hz at 20°C 200 3 6 Rated voltage (V) Stability at Low Temperature Z– 25°C / Z+20°C Impedance ratio (MAX.) Z– 40°C / Z+20°C 400 8 10 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After leaving capacitors under no load at 105°C for 1000 hours they shall meet the specified values for the endurance characteristics listed above. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Test conditions voltage (V) Safety Performance Test Voltage 300VDC and 375VDC 500VDC and 600VDC Limited DC current 4A (5A : 330µF) 200 400 2A (4A : 100µF or more) Printed with white color letter on dark brown sleeve. Marking Radial Lead Type Type numbering system (Example : 200V 220µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U AS 2 D 2 2 1 MHD P ±0.5 φD+0.5 MAX. Size code Configuration Capacitance tolerance (±20%) Rated capacitance (220µF) L+ 2.0MAX. 15MIN 4MIN Pressure relief vent Rated voltage (200V) (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 In case L>25 for φ12.5 (D) case sizes, lead diameter φ0.8 (d) will be applied. Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Series name Type Configuration φD Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD Frequency coefficient of rated ripple current Frequency Coefficient 50, 60Hz 0.80 120Hz 1.00 300Hz 1.25 1kHz 1.40 10kHz or more 1.60 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UAS Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 33 200 （2D） 400 （2G） Case Size φD×L（mm） 10×20 tan δ 0.15 Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （105℃/120Hz） Part Number 364 160 UAS2D330MPD （ ） 47 10×25 0.15 476 195 UAS2D470MPD 47 12.5×20 0.15 476 195 UAS2D470MHD6 56 12.5×20 0.15 548 210 UAS2D560MHD 68 12.5×25 0.15 644 320 UAS2D680MHD 82 12.5×25 0.15 756 360 UAS2D820MHD 100 12.5 ×31.5 0.15 900 430 UAS2D101MHD 100 16 ×20 0.15 900 430 UAS2D101MHD6 150 16× 25 0.15 1300 460 UAS2D151MHD 150 18× 20 0.15 1300 460 UAS2D151MHD6 180 16× 31.5 0.15 1540 600 UAS2D181MHD 180 18×25 0.15 1540 600 UAS2D181MHD6 220 18 ×31.5 0.15 1860 710 UAS2D221MHD 270 18 ×35.5 0.15 2260 890 UAS2D271MHD 330 18× 40 0.15 2740 910 UAS2D331MHD 22 12.5× 20 0.15 452 165 UAS2G220MHD 27 12.5× 25 0.15 532 200 UAS2G270MHD 33 16× 20 0.15 628 225 UAS2G330MHD 39 16× 25 0.15 724 255 UAS2G390MHD 39 18×20 0.15 724 255 UAS2G390MHD6 47 16×25 0.15 852 290 UAS2G470MHD 47 18 ×20 0.15 852 280 UAS2G470MHD6 56 16 ×31.5 0.15 996 340 UAS2G560MHD 56 18 ×25 0.15 996 320 UAS2G560MHD6 68 16 ×35.5 0.15 1188 385 UAS2G680MHD 68 18× 25 0.15 1188 360 UAS2G680MHD6 82 16× 40 0.15 1412 435 UAS2G820MHD 82 18× 31.5 0.15 1412 430 UAS2G820MHD6 100 18×35.5 0.15 1700 490 UAS2G101MHD 120 18 ×40 0.15 2020 540 UAS2G121MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K