UBC1A221MNS1GS

ALUMINUM  ELECTROLYTIC  CAPACITORS UBC Chip Type ,  High Temperature Range, Vibration Resistance Highly dependable reliability withstanding load life of 1000 hours at +150°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UBC UBH Long Life High Temperature UUE Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. Specifications Item Performance Characteristics Category Temperature Range – 40 to +150°C ( φ 8 to 10), – 55 to +150°C ( φ 12.5 to 18) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 10 16 25 35 50 φ 8, φ 10 0.26 0.20 0.16 0.14 0.14 φ 12.5 to φ 18 0.22 0.18 0.16 0.14 0.12 120Hz 20°C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. ( φ12.5 to φ18 ) Rated voltage (V) Stability at Low Temperature Impedance ratio Z(– 40°C) / Z(+20°C) (max.) φ 8 , φ 10 10 16 25 35 50 10 8 6 4 4 8 6 4 4 4 φ 12.5 to φ 18 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 150°C. Shelf Life After storing the capacitors under no load at 150°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Capacitance change tan δ Leakage current Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Chip Type Type numbering system (Example : 10V 220µF) (φ8 , φ10) 1 B±0.2 φD±0.5 A2 220A BC C±0.2 0.3 max. Series Trade mark H L±1.0 Capacitance 2 3 4 5 6 7 8 9 10 11 Size code Capacitance Tolerance (±20%) Rated capacitance (220µF) Rated voltage (10V) φD A±0.2 E A±0.2 B±0.2 100 µF BC 50V H1015 φD±0.5 L±1.0 Series Capacitance C±0.2 0.3 max. 0.5 max. Plastic platform Lot No. nichicon Series name Type Positive Voltage H Code GS MS Configuration Pressure relief vent Trade mark Taping code Size φ8,10 φ12.5 to 18 Negative (φ12.5 to φ18) 12 13 14 UBC 1 A 2 2 1 M NS 1 GS A±0.2 E A±0.2 Lot No. 0.5 max. Positive Plastic platform Voltage( A : 10V ) (mm) 8 10 12.5 16 18 A 2.9 3.2 4.8 5.4 6.4 19.1 B 8.3 10.3 13.6 17.1 C 8.3 10.3 13.6 17.1 19.1 E 3.1 4.5 (4.0) (6.3) (6.3) 10 10 13.5 16.5,21.5 21.5 L H 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 Negative Pressure relief vent Aid electrode Frequency coefficient of rated ripple current Frequency 120 Hz Coefficient 0.67 300 Hz 0.79 1 kHz 0.91 10kHz or more 1.00 Dimension table in next page. CAT.8100L φD 8 to 18 ALUMINUM  ELECTROLYTIC  CAPACITORS UBC ■ Dimensions Rated Voltage （V） （code） 10 （1A） 16 （1C） 25 （1E） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 220 8×10 0.26 50 （1H） （ ） 66 110 Part Number ※UBC1A221MNS1GS 330 10× 10 0.26 99 150 ※UBC1A331MNS1GS 680 12.5 ×13.5 0.22 204 800 ※UBC1A681MNS1MS 1000 12.5×13.5 0.22 300 900 ※UBC1A102MNS1MS 2200 18× 21.5 0.24 660 1350 ※UBC1A222MNS1MS 3300 18× 21.5 0.26 990 1400 ※UBC1A332MNS1MS 100 8× 10 0.20 48 110 　UBC1C101MNS1GS 220 10 ×10 0.20 105.6 150 　UBC1C221MNS1GS 470 12.5× 13.5 0.18 225.6 750 　UBC1C471MNS1MS 680 12.5× 13.5 0.18 326.4 800 　UBC1C681MNS1MS 1000 16 ×16.5 0.18 480 850 　UBC1C102MNS1MS 2200 18 ×21.5 0.20 1056 1350 　UBC1C222MNS1MS 100 8× 10 0.16 75 110 　UBC1E101MNS1GS 220 10×10 0.16 165 150 　UBC1E221MNS1GS 330 12.5× 13.5 0.16 247.5 650 　UBC1E331MNS1MS 470 12.5× 13.5 0.16 352.5 700 　UBC1E471MNS1MS 680 16× 16.5 0.16 510 800 　UBC1E681MNS1MS 1000 16× 21.5 0.16 750 1000 　UBC1E102MNS1MS 8× 10 0.14 80 　UBC1V470MNS1GS 47 35 （1V） Leakage Current Rated Ripple （µA） （mArms） at 20℃ after （150℃/100kHz） 1 minute 49.35 100 10× 10 0.14 105 120 　UBC1V101MNS1GS 220 12.5 ×13.5 0.14 231 550 　UBC1V221MNS1MS 330 12.5 ×13.5 0.14 346.5 650 　UBC1V331MNS1MS 470 16× 16.5 0.14 493.5 750 　UBC1V471MNS1MS 680 16× 21.5 0.14 714 950 　UBC1V681MNS1MS 1000 1050 18× 21.5 0.14 1150 　UBC1V102MNS1MS 33 8×10 0.14 49.5 70 　UBC1H330MNS1GS 47 10× 10 0.14 70.5 100 　UBC1H470MNS1GS 100 12.5×13.5 0.12 150 420 　UBC1H101MNS1MS 220 16× 16.5 0.12 330 550 　UBC1H221MNS1MS 330 16× 21.5 0.12 495 650 　UBC1H331MNS1MS 470 16× 21.5 0.12 705 850 　UBC1H471MNS1MS 680 18× 21.5 0.12 1020 1100 　UBC1H681MNS1MS For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L